Southern Enterprises BE6621 User manual

SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by-step directions
in order .YOU CAN ASSEMBLE THIS ITEM.
STYLE NO: BE6621
WHITE ARCH-TOP
SPACESAVER
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIAL.
NOTE: PLEASE DO NOT OVERTIGHTEN CAM LOCKS!
HARDWARE LIST
(1) MEDIUM MACHINE SCREWS
(Ø1/4”X1”)
4PCS
(11) METAL HINGES
2PCS
(2) LARGE MACHINE SCREWS
(Ø1/4”X1-1/2”)
8PCS
(12) KNOBS
4PCS
(3) X-LARGE MACHINE SCREWS
(Ø1/4”X2-1/4”)
4PCS
(13) SMALL MACHINE SCREWS
(Ø5/32”X5/8”)
4PCS
(4) T-BOLTS
12PCS
(14) SHELF SUPPORTS
4PCS
(5) PLASTIC PLUGS 12PCS
(15) PLASTIC ANCHORS
2PCS
(6) LARGE WOOD DOWELS
Ø8x30mm
8PCS
(16) LARGE FLAT HEAD WOOD
SCREWS (Ø4X25mm)
4PCS
(7) SMALL WOOD DOWELS
Ø6x20mm
12PCS
(17) SMALL FLAT HEAD WOOD
SCREWS (Ø3X10mm)
4PCS

(8) MEDIUM FLAT HEAD WOOD
SCREWS (Ø3X15mm)
16PCS
(18) RIGHT METAL HINGES
1PC
(9) X-LARGE FLAT HEAD WOOD
SCREWS (Ø4X38mm)
2PCS
(19) LEFT METAL HINGES
1PC
(10) PAN HEAD WOOD SCREWS
(Ø2.6X10mm)
26PCS
(20) METAL STOPPER
2PCS
PARTS LIST
(A) TOP PANEL
1PC
(L) DIVIDER
1PC
(B) UPPER LEFT SIDE PANEL 1PC
(M) LOWER RIGHT SIDE FRAME
1PC
(C) UPPER RIGHT SIDE PANEL 1PC
(N) LOWER LEFT SIDE FRAME
1PC
(D) UPPER FIXED SHELF
1PC
(O) CROSS BRACE
1PC
(E) LOWER FIXED SHELF
1PC
(P) UPPER BACK PANEL 1PC

(F) DRAWER FRONT 2PCS
(Q) MIDDLE BACK PANEL
1PC
(G) DRAWER LEFT SIDE
2PCS
(R) LOWER BACK PANEL
1PC
(H) DRAWER BACK
2PCS
(S) RIGHT DOOR
1PC
(I) DRAWER BOTTOM
2PCS
(T) LEFT DOOR
1PC
(J) DRAWER RIGHT SIDE
2PCS
(U) ADJUSTABLE SHELF
1PC
(K) BOTTOM PANEL
1PC
ASSEMBLY INSTRUCTION
1. SELECTA SMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.
2. YOU MAY NEED A PHILIP SCREWDRIVER.
3. INSERT SMALL WOOD DOWELS (Ø6x20mm) (7) INTO PREDRILLED HOLES ON ENDS OF UPPER
AND LOWER FIXED SHELVES (D, E) AND FIT INTO CORRESPONDING HOLES ON INSIDE OF UPPER
LEFT SIDE PANEL (B). INSERT T-BOLTS (4) INTO PREDRILLED HOLES ON UNDERSIDE OF UPPER
FIXED SHELF (D). INSERT LARGE MACHINE SCREWS (Ø1/4”X1-1/2”) (2) THROUGH PREDRILLED
HOLES ON OUTSIDE OF UPPER LEFT SIDE PANEL (B) AND TIGHTEN INTO T-BOLTS (4). PLEASE
NOTE THAT IF SCREWS DO NOT TIGHTEN, ROTATE T-BOLTS (4) SO THAT THE THREADS OF
T-BOLTS (4) ARE FACING SCREWS. TIGHTEN MEDIUM MACHINE SCREWS (Ø1/4”X1”) (1)
THROUGH PREDRILLED HOLES ON OUTSIDE OF UPPER LEFT SIDE PANEL (B) INTO THREADED
HOLES ON END OF TOP PANEL (A). FIT PLASTIC PLUGS (5) INTO HOLES ON OUTSIDE OF UPPER
LEFT SIDE PANEL (B). ASSEMBLE UPPER RIGHT SIDE PANEL (C) IN SAME MANNER. (AS SHOWN
IN FIGURE 1)

4. INSERT MEDIUM FLAT HEAD WOOD SCREWS (Ø3X15mm) (8) THROUGH PREDRILLED HOLES ON
OUTSIDE OF DRAWER RIGHT PANEL (J) AND TIGHTEN INTO PREDRILLED HOLES ON ENDS OF
DRAWER FRONT PANEL (F) AND DRAWER BACK PANEL (H). SLIDE DRAWER BOTTOM PANEL (I)
INTO GROOVES ON DRAWER FRONT PANEL (F) AND DRAWER BACK PANEL (H) AND ALIGN WITH
GROOVE ON DRAWER RIGHT PANEL (J). ASSEMBLE DRAWER LEFT PANEL (G) IN SAME MANNER.
(AS SHOWN IN FIGURE 2)
( 7 )
FIGURE1 FIGURE2
5. INSERT SMALL WOOD DOWELS (7) INTO PREDRILLED HOLES ON TOP EDGE OF DIVIDER (L) AND
FIT INTO CORRESPONDING HOLES ON UNDERSIDE OF LOWER FIXED SHELF (E) AND UPSIDE OF
BOTTOM PANEL (K). INSERT T-BOLTS (4) INTO PREDRILLED HOLES BOTTOM EDGES OF UPPER
LEFTAND RIGHT SIDE PANELS (B, C). TIGHTEN LARGE MACHINE SCREWS (Ø1/4”X1-1/2”) (2)
THROUGH PREDRILLED HOLES ON UNDERSIDE OF BOTTOM PANEL (K) INTO T-BOLTS (4).
PLEASE NOTE THAT IF SCREWS DO NOT TIGHTEN, ROTATE T-BOLTS (4) SO THAT THE THREADS
OF T-BOLTS (4) ARE FACING SCREWS. (AS SHOWN IN FIGURE 3)
6. INSERT LARGE WOOD DOWELS (Ø8x30mm) (6) INTO PREDRILLED HOLES ON WOOD BARS ON
UNDERSIDE OF BOTTOM PANEL (K), THEN FIT INTO CORRESPONDING HOLES ON INSIDE OF
LOWER LEFTAND RIGHT SIDE FRAMES (M, N). INSERT LARGE FLAT HEAD WOOD SCREWS
(Ø4X25mm) (16) THROUGH PREDRILLED HOLES ON WOOD BARS ON UNDERSIDE OF BOTTOM
PANEL (K) AND TIGHTEN INTO CORRESPONDING HOLES ON INSIDE OF LOWER LEFTAND RIGHT
SIDE FRAMES (M, N). INSERT T-BOLTS (4) INTO PREDRILLED HOLES ON BACK OF CROSS BRACE
(O). TIGHTEN X-LARGE MACHINE SCREWS (Ø1/4”X2-1/4”) (3) THROUGH PREDRILLED HOLES ON
OUTSIDE OF LOWER LEFTAND RIGHT SIDE FRAMES (M, N) INTO T-BOLTS (4). PLEASE NOTE
THAT IF SCREWS DO NOT TIGHTEN, ROTATE T-BOLTS (4) SO THAT THE THREADS OF T-BOLTS (4)
ARE FACING SCREWS. (AS SHOWN IN FIGURE 4)
7. ATTACH UPPER BACK PANEL (P) INTO SLOTS ON PARTS (A, B, C, D). INSERT PAN HEAD WOOD
SCREWS (Ø2.6X10mm) (10) THROUGH PREDRILLED HOLES ON UPPER BACK PANEL (P)AND
TIGHTEN INTO CORRESPONDING HOLES ON REAR EDGES OF PARTS (A, B, C, D). ASSEMBLE
MIDDLE AND LOWER BACK PANELS (Q, R) IN SAME MANNER. (AS SHOWN IN FIGURE 5)

FIGURE3 FIGURE4
( 1 0 )
( Q )
( P )
( R )
FIGURE 5

8. INSERT METAL HINGES (11) INTO PREDRILLED HOLES ON TOP EDGES OF LEFT AND RIGHT
DOORS (S, T)AND FIT INTO CORRESPONDING HOLES ON UNDERSIDE OF TOP PANEL (A). INSERT
LEFTAND RIGHT METAL HINGES (18, 19) INTO PREDRILLED HOLES ON UPSIDE OF UPPER FIXED
SHELF (D). INSERT SMALL FLAT HEAD WOOD SCREWS (Ø3X10mm) (17) THROUGH LEFT AND
RIGHT METAL HINGES (18, 19)AND TIGHTEN INTO PREDRILLED HOLES ON BACK OF LEFTAND
RIGHT DOORS (S, T). INSERT SMALL MACHINE SCREWS (Ø5/32”X5/8”) (13) THROUGH
PREDRILLED HOLES ON LEFTAND RIGHT DOORS (S, T)AND TIGHTEN INTO METAL KNOBS (12).
(AS SHOWN IN FIGURE 6)
9. FOR SAFETYAND STABILITY, PLACE THE UNIT AGAINST WALL, DRILL TWO 1/4” DIAMETER
HOLES IN WALL, THE DISTANCE BETWEEN TWO HOLES SHOULD MATCH TO THE PREDRILLED
HOLES ON UPPER BACK PANEL (P). FIT PLASTIC ANCHORS (15) INTO THE HOLES ON WALL. USE
SCREWDRIVER TO SCREW X-LARGE FLAT HEAD WOOD SCREWS (Ø4X38mm) (9) THROUGH
PREDRILLED HOLES ON UPPER BACK PANEL (P) INTO PLASTIC ANCHORS (15). (AS SHOWN IN
FIGURE 6).
10. FIT SHELF SUPPORTS (14) INTO PREDRILLED HOLES ON UPPER LEFT AND RIGHT SIDE PANELS (B,
C). PUTADJUSTABLE SHELF (U) ON EACH SHELF SUPPORTS (14). (AS SHOWN IN FIGURE 6)
11. INSERT SMALL MACHINE SCREWS (Ø5/32”X5/8”) (13) THROUGH PREDRILLED HOLES ON BACK
OF DRAWER FRONT PANELS (F) AND TIGHTEN INTO METAL KNOBS (12). TIGHTEN METAL
STOPPERS (20) INTO PREDRILLED HOLES ON LOWER FIXED SHELF (E). AND PLACE THE
ASSEMBLED DRAWERS INTO SPACE OF UNIT. (AS SHOWN IN FIGURE 7)
FIGURE6 FIGURE7
(17)
(9) (18)
(19)
(17)
(11)
(9)
(11)
(14) (13)
(12)
(U)
(S)
(T)
YOUR NEW WHITEARCH-TOP SPACESAVER IS FINISHED AND READY TO USE.

Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to
divide parts and label them to correspond with part list. Extra hardware may be included. If any items are
missing, please contact our parts/service department at [phone] or in Dallas [phone]/ 9am –
4pm Mon-Fri Central time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE
DO NOT SELL PARTS. WE DO NOT RECOMMEND MODIFYING PRODUCT(S) AND WE ARE NOT
RESPONSIBLE FOR ANY DAMAGES DUE TO PRODUCT MODIFICATION(S). If this product has not
been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or
replacement merchandise. Parts will not be available for items arriving fully assembled.
NOTE: PLEASE DO NOT OVERTIGHTEN CAM LOCKS!
"We will ship parts if available" "This is not a warranty"
PARTS REPLACEMENT FORM
STYLE NO: BE6621
Customer Name PARTS
LETTER PART DESCRIPTION QUANTITY NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229 Please indicate color/size/style number
/ /