E-Collar Technologies PG-300 User manual

1-260-357-0051 or [email protected]
PG 300 Series Communicator
Remote Communication Collar
Thank you for purchasing the PG-300 or PG-302 Remote Pager from E-
Collar Technologies, Inc. We have made every attempt to provide you
with the most technologically advanced product using the most stringent
quality and manufacturing standards.
We are confident you will be pleased with the results you will attain with
your pager. Please remember you will get better results with the use of
lower vibration combined with consistent training techniques. Some
techniques require a high value reward immediately after the correct
behavior has been performed. To prevent desensitization the use of high
levels of vibration should only be used when lower levels do not produce
the desired results, Visit our youtube channel for training videos and
"Like" our Facebook page to network with fellow pager users.
Good luck with your training and please feel free to contact us should you
have any questions.

PG300/302 Owner’s Manual
TABLE OF CONTENTS
02
- Important Notice
- Characteristics
- Package Contents
- Device Operation
- Charging the Batteries
- Turning Your E-Collar ON/OFF
- Correctly Fitting Collar
- The LCD Display Description
- Button Functions
- How to Find the Proper Vibration Level
-
- How to Set the Boost
- Lost Transmitter Mode
- Replace/Add A Collar
03
04
05
06
07
08
09
10
11
13
14
15
16
17
Two Dog 302 Specifics
- 302 LCD Description
- 302 Button Functions
- How to Lock/Unlock the Vibration Level
- 302 Boost level Setup
18
19
21
22
- Training Tips
- Troubleshooting
- Two Year Warranty
- Accessories
- Safety and General Information
23
24
25
26
27
...................................
....................................
..................................
...................................
...............................
.........................
...............................
..........................
...................................
.................
Lock/Unlock the Vibration Leve.l......................
................................
...............................
...............................
......................................
...................................
.................................
......................................
........................
................................
...............................
..................
...............................

IMPORTANT NOTICE
PG300/302 Owner’s Manual
03
The range of the PG 300/302 may vary according to terrain, weather
conditions, foliage, and power lines as well as radio transmissions from
other devices.
IMPORTANT NOTICE
This product is intended to be used on animals only.
E-Collar Technologies, Inc. is not responsible for any misuse of this
product including damages from dog bites and lost items. Seek an
evaluation by a professional trainer before use on aggressive dogs. It is
not uncommon for aggressive dogs to associate the vibration with the
handler and take action against the handler. Sometimes dogs put under
pager pressure during a fight can exhibit redirected aggression and
become more aggressive. All risks associated with the use of this product
is the sole responsibility of the user at the time of the loss.

04
PG300/302 Owner’s Manual
CHARACTERISTICS
•
•
•
•
•
•
•
•
•
•
•
• Convertible from 1-Dog model (PG 300) to
2-Dog model (PG 302) see page 17.
Range : ½ Mile
Three Vibration Modes Supported
(Momentary, Continuous, and Combo Mode)
The right button can be set to Tapping Sensation
or Tone
Quick Charge Li-Polymer Batteries
Convenient Intensity Dial for Quick Adjustment
Vibration Levels Adjustable from 0 to 100
Collar Receiver Light for locating your dog at night
Lock and Set Stimulation Safety Feature
Vibration Boosting Mode provides instant control when normal
vibration is ignored - great for emergency situations. User
Adjustable Boosting Levels from 1 to 60 Levels
Completely Waterproof

PG300/302 Owner’s Manual
PACKAGE CONTENTS
05
• Collar Receiver with Strap
(PG 302 Package includes
2 Receivers and straps)
• Lanyard
• Battery Charger
(PG 302 package contains
splitter cable)
• Transmitter
• Owner’s Manual
PG 300/302
Owner's Manual
Welcome to the World of
E-Collar Technologies, Inc.
“Communication with your
Best Friend has Never Been Easier”

PG300/302 Owner’s Manual
06
DEVICE OPERATION
Tapping Sensation
or Tone
On/Off Magnetic Red Dot
Light and On/Off Button
BatteryCharging Receptacle
and Rubber Cover
Momentary/ Continuous
Mode Button
Antenna
VibrationnLevelDial
& Lock/Unlock Knob
Vibration Button (Black)
Vibration Button (Red)
Battery Indicator Light
(LED Window)
LCD Display
Collar Strap
BatteryIndicator Light
and Tracking Light
On/Off Magnetic Red Dot
BatteryCharging
Receptacle and
Rubber Cover

PG300/302 Owner’s Manual
CHARGING THE BATTERIES
07
Transmitter BatteryCharging
Receptacle and Rubber Cover
Collar Receiver BatteryCharging
Receptacle and Rubber Cover
Indicator Light is blinking “Green” under normal operation.
solid “Red” when vibration is applied.
blinking “Red” when recharging is required.
Do not allow the batteries to get hot or be fully discharged,
store at room temperature and 50% capacity charge.
1 2
3 4
• The indicator light will turn solid red during charge cycles and turn
greenif it is fully charged. (approximately 2 hours)
Please add this about the batteries:
Your pager is outfitted with Li Polymer batteries which requires specific
care to assure longevity. It is best not to let the battery be fully discharged
and if it does, recharge immediately or irreversible damage may occur.
Keep the units away from extreme heat and cold temperatures.

TURNING YOUR E-COLLAR ON/OFF
PG300/302 Owner’s Manual
08
•
To turn the Collar Receiver On or Off :
Place the small red dot on the Transmitter to the small red dot on
the Collar Receiver.
To turn the Transmitter On or Off :
Press the “L” button for more than 1
second.
If the Transmitter is turned on, a
short press of the "L" button will
activate the tracking light of the
collar receiver. Press and hold for 2
seconds to turn Transmitter off.
•
To obtain the maximum range hold the transmitter like the torch on the
Statue of Liberty. Keep the antenna away from your body or fingers at
all times, touching the antenna will greatly reduce the range.
•
Holding the Transmitter
[ Long Range ] [ Medium Range ] [ Short Range ]

You should be able to fit a couple of
fingers between the collar strap and your
dog's skin. Too tight poses discomfort.
Too loose will not be able to administer
the vibration consistently. If your dog
seems overly sensitive to the vibration
try loosening the collar strap.
PG300/302 Owner’s Manual
CORRECTLY FITTING COLLAR
09

THE LCD DISPLAY DESCRIPTION
PG300/302 Owner’s Manual
10
Blinking “1D” indicates the vibration level
ready for adjustment.
Solid “1D” indicates vibration level is
“Locked”
Displays the Vibration Level :
“0” means no vibration and “HI” means the
highest vibration level(100 )
Momentary / Continuous Button "M/C"- M/C Button on the backside of
the transmitter allows the user to easily switch between the three
vibration modes. Function of vibration button changes by mode.
Vibration
Button
Momentary
Mode
Continuous
Mode
Combo Mode
Tapping Sensation or Tone

BUTTON FUNCTIONS
PG300/302 Owner’s Manual
11
Stimulation Button S (Black)
- Sends momentary or continuous vibration to the collar receiver
based on the state of Momentary/Continuous Mode.
Stimulation Button S (Red)
- Sends momentary or continuous boosted vibration.
- If
vibration level is 10, boosted vibration sends [10 + boost level ]
- The default value of the boosted level is 5, it can be adjusted to any
value between 1 and 60. Smaller and more sensitive breeds should
use levels 1 through 20, larger and/or more stubborn breeds may
need a higher boost.
Momentary Vibration
Sends a single pulse of vibration at the set level when you press the
vibration button.
Continuous Vibration
Sends vibration for as long as the button is pressed,
timing out after 10 seconds (this is a safety feature designed to
prevent accidental over-vibration of your dog). The stimulation can
be increased or decreased while the button is being pressed.
Tapping Sensation
Vibration specifically designed to distract your dog.
Tone
Flat sound up to 30 second.

PG300/302 Owner’s Manual
BUTTON FUNCTIONS
12
Boosting Vibration in Combo Mode
Momentary Boosting is accomplished by first sending a momentary
vibration pulse “S (Black)” to the dog and then pressing “S (Red)”
button without releasing “S (Black)” button. (PLEASE PRACTICE)
Continuous Boosting is accomplished by first administering continu-
ous vibration “S (Red)” to the dog and then pressing the “S (Black)”
button without releasing the "S (Red)" button.
Tapping Vibration / Tone “T”
Sends Tapping Sensation or Tone to the collar receiver.
(Default setting is tone).
To toggle between tapping sensation and tone press “L” and
“T” buttons simultaneously when the intensity level is “0”.
-Single beep and “A” icon indicates tone.
- Double beeps and “T” icon indicates Tapping Sensation (Vibration).
Light Button "L" (ON/OFF Center Button on Back)
Pressing “L” button will change the night tracking light mode.
OFF -> Flashing -> Solid -> OFF
Great for locating your dog after dark. (PLEASE PRACTICE)
Tone Tapping Sensation

13
HOW TO FIND THE PROPER
VIBRATION LEVEL
Rotating clockwise increases the
vibration level, and rotating
counter-clockwise lowers the
vibration level.
It is highly recommended that the user practices changing levels and
modes before putting the collar receiver on a dog.
Setting the correct vibration level for your dog is very important. To
set your “conditioning” vibration level, correctly put the collar
receiver on your dog (see page 9 for instructions). Let the dog get
used to the collar receiver for a couple of hours.
While watching your dog, turn the level to “0” and press the continuous
vibration button. Slowly turn the stimulation up at a rate of
approximately 2-3 levels per second. When your dog first perceives the
vibration release the button. This is your “conditioning” vibration level.
You may need to increase the “conditioning” level a few levels to get
your dog to respond at first, some dogs are more distracted and need
more vibration. The boosted level is typically 5 to 20 levels higher than
the “conditioning” level.
PG300/302 Owner’s Manual

PG300/302 Owner’s Manual
14
LOCK/UNLOCK THE
VIBRATION LEVEL
How to Lock/Unlock the Vibration Level
Set the desired vibration level and then press on the top of the
stimulation dial until you see “1D” light up on the top portion of the LCD
display. Flashing "1D" indicates unlocked vibration and Solid "1D"
indicates locked vibration level.
If the vibration level does not change when you rotate the stimulation
knob, you have successfully locked the vibration level.
To unlock the vibration level simply press the stimulation knob again
and it will unlock the vibration level.

PG300/302 Owner’s Manual
15
HOW TO SET THE BOOST
Boosted vibration adds the set boost level to the vibration level,
great for those situations when your dog does not respond to the
“conditioning” level. Determining the Boosted vibration level is a little
more difficult than vibration level setting due to the wide differences in
temperaments and vibration tolerance among the many breeds of
dogs. On average, it is normally 5 to 20 levels higher than the
“conditioning” level. It is important to have it set high enough to get the
desired response from your dog.
1. Change the mode to Momentary Mode.
(Press M/C button until “M” is displayed)
2. Change the intensity level to “0”.
3. Press S(Black) button for more than 5 seconds.
4. The intensity level will change from "0" to a flashing "1".
5. Rotate the dial to the desired boost level (1 to 60).
6. Press S(Black) button again to save and exit the boost level
changing mode.

PG300/302 Owner’s Manual
16
LOST TRANSMITTER MODE
Your PG 300/302 transmitter allows the user to turn on a 6 hour timer.
After 6 hours the transmitter will begin beeping providing the ability to
locate the transmitter.
Lost transmitter mode is activated by simultaneously pressing the light
(L) button and then simultaneously pressing the stimulation button
(Black "S") when the intensity level is set to zero. Three short beeps will
sound confirming the activation of the locator timer.
Lost transmitter mode is turned off by turning your transmitter off and
back on again.
Light and
On/Off Button
Stimulation
Booster
Button(Red)
Stimulation
Button(Black)

PG300/302 Owner’s Manual
17
REPLACE/ADD COLLAR
Occassionally, it is necessary to pair/sync a transmitter to a collar
receiver, the following procedure will accomplish this:
1. Turn on the Transmitter
2. Turn intensity dial to “0”
3. Make sure the collar receiver is turned off.
4. Put the Transmitter’s Red Dot against the Collar Receiver’s Red Dot
for more than 5 seconds, green light on Receiver will flash rapidly
5. Immediately after, press and hold Black “S” Button followed by the Red
“S” Button until you hear confirmation sound from Collar Receiver.
HOW TO CHANGE THE TRANSMITTER TO A 2 DOGTRANSMITTER
The button functions will change. The changes are described on pages 18
through 22. You can change thetransmitter back to the 1 Dog system
(PG 300) at any time.
1. Turn on the Transmitter.
2. Press the Red "S" followed by the Black "S" followed by the "T" Button
simultaneously for more than 2 seconds until you hear the confirmation beeps.
3. Repeat step 2 to return back to a 1 dog system.
ADD/REPLACE COLLAR FOR SECOND DOG
1. Turn on the Transmitter
2. Turn intensity dial to “0”
3. Make sure Receiver is turned off.
4. Put the Transmitter’s Red Dot against the Collar Receiver’s Red Dot
for more than 5 seconds, green light on Receiver will flash rapidly.
5. Immediately after, press and hold Red "S" Button followed by the Black
"S" Button until you hear confirmation sound from Collar Receiver.

Blinking 1D or 2D icons indicates the
vibration level is ready for adjustment.
Solid icon indicates vibration level
locked.
Displays the Vibration Level : “0” means
no vibration and “HI” means the highest
vibration level(100)
Momentary / Continuous Button "M/C"- M/C Button on the backside of
the transmitter allows the user to easily switch between two vibration
modes either momentary or continuous.
PG300/302 Owner’s Manual
302 LCD DESCRIPTION
18
Button Vibration Mode (1D or 2D)
TS(Vibration)
or Tone
M/C Button Momentary Mode Continuous Mode N/A
Display
S (Black) Dog 1 Momentary Dog 1 Continuous Dog 1 TS (Vib)
or Tone
S(Black) + S(Red)
S (Black)+ S(Red)
Dog 1 Momentary
Booster
Dog 1 Continuous
Booster N/A
Dog 2 Momentary
Booster
Dog 2 Continuous
Booster N/A
N/A
S (Red) Dog 2 Momentary Dog 2 Continuous
L"L" in Dog 1 set mode will control Dog 1 light
"L" in Dog 2 set mode will control Dog 2 light
Dog 2 TS (Vib)
or Tone

Mode Button "T”
Mode button allows the user to change modes as shown in the diagram
Tapping Sensation or
Tone
Dog 2 Set Mode
Tapping Sensation or
Tone
Dog 1 Set Mode
To toggle between tapping sensation and Tone press “L” and “T”
buttons simultaneously for 2 seconds when the intensity level is “0”.
- Single beep and “A” icon indicates tone.
- Two beeps and “T” icon indicates tapping sensation.
302 BUTTON FUCTIONS
PG300/302 Owner’s Manual
19
1 Dog Set Mode - LCD display shows 1D
2 Dog Set Mode - LCD display shows 2D
Tapping Sensation or Tone - LCD display a T
Tapping Sensation / Tone “T”
Light Button(On Back) “L”
When the "L" button is pressed, “L” will be displayed.
If you press L while in Dog 1 Mode, Dog 1's Light will activate.
If you press L while in Dog 2 Mode, Dog 2's Light will activate.
Tracking Light will Cycle: Flashing -> Solid -> OFF when L is pressed.