E-Collar Technologies Easy Educator EZ-904 User manual

Easy Educator EZ-904
Quick Start Guide
E-Collar Technologies, Inc.

Welcome
Thank you for trusting us with your purchase of the 904 Easy Educator
Remote Education Collar. We have made every attempt to provide you
with the most technologically advanced product using the most
stringent quality and manufacturing standards.
We are confident you will be pleased with the results you will attain with
the 904 Easy Educator. Please remember you will get better results with
the use of low level stimulation combined with consistent training tech-
niques. The use of high levels of stimulation should only be used as a last
resort and in life-threatening situations.
Good luck with your training and please feel free to contact us should you
have any questions.
* This guide will familiarize you with the basic functions, programming
features and the contents of the 904 Easy Educator.
Additional information and help is available on www.ecollar.com and
e-mail by e-mailing [email protected]. To talk to a live
team member please contact our customer service department,
8 AM to 8 PM E.S.T., 1-855-326-5527 or [phone]. Your total
satisfaction is our only concern.

TABLE OF CONTENTS
3
4
5
6
7
8
9
12
13
15
17
18
19
21
22
Characteristics
Package Contents
Turning ON/OFF the EZ-904 System
Charging Instructions
EZ-904 Functions
LCD Display 4Dog Mode
Buttons Descriptions and Stimulation Button Assignments
I Mode
Lock and Unlock Stimulation Level
Booster Level Setup
Lost Transmitter Activation
EZ-904 Four Dog Default Settings
Pairing/Syncing
Warning Mode
Warranty and Registration

CHARACTERISTICS
03
1/2 mile Range
Employs Quick Charge Li-Polymer Batteries
Convenient Intensity Dial for Quick Adjustment
Stimulation Levels Adjustable from 0 to 100
Collar Receiver Light for Night Tracking
“Lock and Set” Stimulation Safety Feature
User Adjustable Boosting Levels
Patented “I” Mode Provides Instant Stimulation
Waterproof and Shock Resistant

PACKAGE CONTENTS
04
Ergonomic Transmitter
- Remote-Sender
Quick Start Owner’s
Guide
Four Waterproof
Collar Receivers High
Quality Biothane Strap
Test Light 5/8” and 3/4” Contact
Points
Contact Point Tool
Lanyard Battery Charger Splitter Cable
Easy Educator EZ-904
Quick Start Guide
E-Collar Technologies, Inc.

05
Turn ON/OFF the transmitter by pressing the lower
right button for 1 second.
Turn ON/OFF the collar receiver by placing the red dot on the transmitter on
the red dot on the collar receiver for 1 second.
Turning ON/OFF the EZ-904 System

06
Please charge the units on or before the low battery indication. It is best not
to wait until the batteries are fully drained to avoid damage. To charge insert
the micro USB into the transmitter and the charge plug into the collar receiv-
er as pictured. Store with 50% charge in cool dry place.
Charging Instructions
splitter cable
Low Battery Indication
Transmitter : One bar remaining on the LCD display indicates charging is
needed.
Collar Receiver : Yellow light indicates low and red indicates very low
battery life.

07
Icon
M
M+
C+
C
Stimulation
Others
I
V
T
Function
Momentary Stimulation Send momentary stimulation (volume level)
Momentary Boost Stimulation Send momentary boosting stimulation
(volume + boost Level)
Continuous Stimulation Send continuous stimulation
(max 10 sec, volume level)
Instant Mode Without pressing any button, it will send continuous
stimulation by rotating volume dial. (max 45 sec)
Vibration Send vibration (max 30 sec)
Tone Send tone (max 30 sec)
Continuous Boost Stimulation Send continuous boosting stimulation
(max 10 sec, volume + boost level)
Description
Icon Function Description
Easy Educator 904 provides 5 types of stimulation sensations, tone, and
vibration.
EZ-904 Functions

08
LCD DISPLAY
4 DOG Mode
Icon
M
M+
C+
C
I
V
T
Number
Description
Momentary Stimulation Short Pulse of Stimulation
Momentary Boost Stimulation Short Pulse of Boosted Stimulation
Continuous Stimulation Up to 10 Seconds of Stimulationㅤ
Instant Stimulation Mode
Stimulation Level Displayed on the LCD,
Must Start From “0”
Vibration Non Stimulation Sensation Similar to a
Vibrating Cell Phoneㅤ
Tone Audible Tone
Stimulation Level 0 to 100(HI) level
Continuous Boost Stimulation Up to 10 Seconds of Boosted Stimulation
Remarks

Buttons Descriptions and
Stimulation Button Assignments
The 904 Easy Educator has 4 control buttons which are assigned to
stimulation, vibration and tone. S1 is programmed for Dog 1, S2 is for
Dog 2, S3 is for Dog 3, and S4 is for Dog 4. It also has 2 program buttons
for changing mode and turning the unit ON and OFF. The convenient dial
provides for easy and sight free control of the stimulation level.
09
Volume Dial
P-Button
S1-Button(1D)
S3-Button(3D)
S2-Button(2D)
S4-Button(4D) ON/OFF-Button
Stimulation Level

10
Function Description
Power ON/OFF
Light
Press more than 1 sec to turn ON
Press more than 2 sec to turn OFF
Program
Buttons
ON/OFF
Volume lock
Mode buttons
Warning Mode
1D Volume lock : P+S1 (more than 1 sec)
2D Volume lock : P+S2 (more than 1 sec)
3D Volume lock : P+S3 (more than 1 sec)
4D Volume lock : P+S4 (more than 1 sec)
Set Stimulation Level "0"
S1(Dog1) mode change: P+S1 (M C V T)
S2(Dog2) mode change: P+S2 (M C V T)
S3(Dog3) mode change: P+S3 (M C V T)
S4(Dog4) mode change: P+S4 (M C V T)
If pressed one time, all Momentary and
Continuous stimulation will be changed to
Vibration.
To exit from Warning Mode,
press P button again.
P
(toggling : blink solid off)
When Stimulation level is not 0
1D light : ON/OFF + S1
2D light : ON/OFF + S2
3D light : ON/OFF + S3
4D light : ON/OFF + S4
Stimulation Level Lock

11
Control
Buttons
Function Possibilities
M / C(I) / V / T N / A
M / C(I) / V / T
N / A
M / C / V / T / 1D / 2D / 3D / 4D
1D Booster :
S1+S2 2D Booster : S2+S1 3D Booster : S3+S4 4D Booster : S4+S3
N / A N / A
N / AN / A N / AM / C(I) / V / T
N / A N / AN / A
N / AN / A M / C(I) / V / T
1. To start Instant mode, rotate volume to level 0 and press a button set to
continuous "C" mode activates the "I" mode when pushed on level "0"
2. To exit from Instant mode, press any button or wait for the 45 second
time out.
S1-Button
S2-Button
S3-Button
S4-Button
LCD Display
Booster
Function
It is only activated when first button is M or C
1Dog 2Dog 3Dog 4Dog

“I” Instant Stimulation Mode
“I” Instant Stimulation Mode
The "I" mode is a patented feature which allows the stimulation to
increase gradually as determined by the user. The gradual introduction of
stimulation provides a more gentle sensation and removes the startling
effect sometimes associated with applying a constant level of stimulation.
The dog produces less cortisol and learns to avoid the higher levels by
responding quickly to the command. The user has the flexibility of
increasing the stimulation fast if the situation warrants a quick response
from the dog.
How Instant Stimulation “I” Mode Works
How Instant Stimulation “I” Mode Works
1. Change the mode of any S button to Continuous if not already
programmed to “C” mode : The stimulation dial must be turned to
“0” to enter the “I” mode.
2. To start the “I”, push the assigned Continuous button. The display will
flash On to indicate it is on and ready to begin stimulation.
3. Turning the stimulation will now activate the stimulation at the setting
of the dial and continue for 45 seconds.
Returning to “0” will reset the 45 second safety timer.
4. If you do not rotate the dial for 45 seconds the “I” mode will turn off
and the control button will need to be pushed again.
5. Pushing any of the other control buttons will turn off the “I” mode and
therefore require the “I” mode control be pushed again to reactivate it.
6. Again, to exit the Instant Mode, press any control button or wait for
45 seconds.
I Mode
12

Lock and Unlock Stimulation Level for Dog 1
Lock and Unlock Stimulation Level for Dog 1
1. Check LCD display to confirm 1D icon is blinking.
2. Set the desired stimulation to be locked by rotating volume dial.
3. Press P button and S1 simultaneously and hold one second to lock.
4. Check LCD display to confirm 1D icon changes blinking to solid
5. To unlock press P button and S1 simultaneously and hold one
second.
6. Check LCD display to confirm 1D icon changes solid to blinking.
Lock and Unlock Stimulation Level for Dog 2
Lock and Unlock Stimulation Level for Dog 2
1. Check LCD display to confirm 2D icon is blinking.
2. Set the desired stimulation to be locked by rotating volume dial.
3. Press P button and S2 simultaneously and hold one second to lock.
4. Check LCD display to confirm 2D icon changes blinking to solid
5. To unlock press P button and S2 simultaneously and hold one
second.
6. Check LCD display to confirm 2D icon changes solid to blinking.
13
Lock and Unlock
Stimulation Level
* Important Note: Blinking “1D”, “2D”, “3D”, or “4D” Indicates Unlocked
* Important Note: Blinking “1D”, “2D”, “3D”, or “4D” Indicates Unlocked
Stimulation / Solid “1D”, “2D”, “3D” or “4D” Indicates
Stimulation / Solid “1D”, “2D”, “3D” or “4D” Indicates
Locked Stimulation
Locked Stimulation

Lock and Unlock Stimulation Level for Dog 3
Lock and Unlock Stimulation Level for Dog 3
1. Check LCD display to confirm only 3D icon is blinking.
2. Set the desired stimulation to be locked by rotating volume dial.
3. Press P button and S3 simultaneously and hold one second to lock.
4. Check LCD display to confirm 3D icon changes blinking to solid
5. To unlock press P button and S3 simultaneously and hold one
second.
6. Check LCD display to confirm 3D icon changes solid to blinking.
Lock and Unlock Stimulation Level for Dog 4
Lock and Unlock Stimulation Level for Dog 4
1. Check LCD display to confirm only 4D icon is blinking.
2. Set the desired stimulation to be locked by rotating volume dial.
3. Press P button and S4 simultaneously and hold one second to lock.
4. Check LCD display to confirm 4D icon changes blinking to solid
5. To unlock press P button and S4 simultaneously and hold one
second.
6. Check LCD display to confirm 4D icon changes solid to blinking.
14

Booster Level Setup
Boost Level Setup for Dog 1
Boost Level Setup for Dog 1
1. Change the mode of S1 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
3. Press Momentary button for more than 5 sec and enter into Booster
Level Change Mode.
4. Check LCD displays M+ / C+ icon
5. Rotate the dial to change the booster level. (The range of booster
level is from 1 to 60, default is 5)
6. Press Momentary Button again to exit from Booster Level Change
Mode.
Boost Level Setup for Dog 2
Boost Level Setup for Dog 2
1. Change the mode of S2 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
3. Press Momentary button for more than 5 sec and enter into Booster
Level Change Mode.
4. Check LCD displays M+ / C+ icon
5. Rotate the dial to change the booster level. (The range of booster
level is from 1 to 60, default is 5)
6. Press Momentary Button again to exit from Booster Level Change
Mode.
15

Boost Level Setup for Dog 3
Boost Level Setup for Dog 3
1. Change the mode of S3 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
3. Press Momentary button for more than 5 sec and enter into Booster
Level Change Mode.
4. Check LCD displays M+ / C+ icon
5. Rotate the dial to change the booster level. (The range of booster
level is from 1 to 60, default is 5)
6. Press Momentary Button again to exit from Booster Level Change
Mode.
Boost Level Setup for Dog 4
Boost Level Setup for Dog 4
1. Change the mode of S4 button to Momentary if not already
programmed to “M” mode.
2. Change the Stimulation level to “0”
(Stimulation level should be unlocked)
3. Press Momentary button for more than 5 sec and enter into Booster
Level Change Mode.
4. Check LCD displays M+ / C+ icon
5. Rotate the dial to change the booster level. (The range of booster
level is from 1 to 60, default is 5)
6. Press Momentary Button again to exit from Booster Level Change
Mode.
16

17
Lost Transmitter Activation (6 hour timer) : ON/OFF (Bottom Right)
Lost Transmitter Activation (6 hour timer) : ON/OFF (Bottom Right)
plus P (Top Right)
plus P (Top Right)
1. Change the Stimulation level to “0”
2. Press ON/OFF button and then press P button simultaneously.
3. One short beep will sound confirming the activation of the locator
timer.
4. To deactivate, press ON/OFF button and P button one more time.
5. Two short beeps will sound confirming the deactivation of the locator
timer.
6. The transmitter will start beeping exactly 6 hours from activation
so plan your excursion accordingly.
Lost Transmitter Activation

18
Factory default setting of EZ-904 is as below. You can change Tone
Mode, Vibration Mode, and Instant Mode by using computer interface tool
which can be downloaded at http://www.ecollar.com
http://www.ecollar.com
EZ-904 Four Dog Default Settings
Factory Default Setting
S1-Button
S2-Button
S3-Button
S4-Button
Boost Level
1D Momentary
2D Momentary
3D Momentary
4D Momentary
5
Tone Mode
Vibration Mode
Mode – 2
Instant Mode Normal Mode
Mode – 4

19
Pairing/Syncing
When you change transmitter or collar receivers they will need to paired/
synced to each other for them to communicate with each other.
Pairing/Syncing for Dog 1 (ON/OFF + S1)
Pairing/Syncing for Dog 1 (ON/OFF + S1)
1. Turn on the Transmitter.
2. Rotate the intensity dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter against
the red dot on the collar receiver for more than 5 seconds till the
solid green light starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S1 button (Side Top)
simultaneously.
5. Listen for confirmation sound from the Collar Receiver.
6. Test the collar receiver to make sure it accepted the new transmitter
pairing/syncing code.
Pairing
Pairing
/Syncing
/Syncing
for Dog 2 (ON/OFF + S2)
for Dog 2 (ON/OFF + S2)
1. Turn on the Transmitter.
2. Rotate the intensity dial to “0”.
3. Turn off the collar receiver. Put the red dot on the transmitter against
the red dot on the collar receiver for more than 5 seconds till the
solid green light starts blinking on and off rapidly.
4. Press the ON/OFF button and then press the S2 button
(Side Bottom) simultaneously.
5. Listen for confirmation sound from the Collar Receiver.
6. Test the collar receiver to make sure it accepted the new transmitter
pairing/syncing code.