Eagle Peak IM GHPC36-GRN-AZ User manual

Thank you for choosing Eagle Peak !
EAGLE PEAK 6ftx 6 ft PC GREENHOUSE
INSTRUCTION MANUAL
Do not return your greenhouse to the place of purchase. For
warranty service, repair parts, or product questions please contact
Eagle Peak through the website and we'll reply immediately.

Proper placement of your greenhouse is essential.
Do not place the product underneath electrical lines.
Keep children away during assembly.
This product contains small parts which can be swallowed by children.
Keep fingers away from the places where they can be pinched or trapped.
Do not attempt to assemble the greenhouse if any parts are missing.
Caution!
· The product should be placed on flat, horizontal ground.
· Ensure enough clearance around the product. Before assembling the product, find level ground no
less than 6'(1.8 m) away from any structures or obstructions, such as fences, garages, houses,
overhanging branches, laundry lines, or electrical wires.
· This greenhouse is not to be regarded as part of a building/house structure. The greenhouse is to
be anchored onto the ground for added safety. Do not assemble the greenhouse on soil/earth
ground. It is best to build the greenhouse on a hard, stable foundation. It is advisable to use
appropriate floor plugs(not provided) to anchor the greenhouse onto the wooden/concrete
ground.
· Some structures may require two or more people to install safely. Check for underground utilities
before digging or driving stakes into the ground.
· During installation, follow all safety warnings provided with yourtools and use safety glasses.
· If you set up more than one greenhouse, keep a minimum distance of 10'(3 m) between the
greenhouses.
· Any assembly or maintenance of the product must be carried out by adults only.
· Arrange necessary manpower when assembling or moving the product.
· Some parts may contain sharp edges. Wear protective gloves if necessary.
· Keep children and pets away while setting up the greenhouse.
· Check all nuts and bolts periodically to ensure bolts/nuts are tightened.
· Repairing and replacing parts should be done by a qualified technician.
· This greenhouse is intended for decorative and sunshade purposes only, and it is not designed to
withstand harsh weather, including high winds, rain, and snow.
· Do not light any fires inside or near the product not!
· Stay calm if fire breaks out. Search for the nearest exit. Do not return to the greenhouse before
firemen allow you to do so.
· Do not hang heavy weights on the roof frame.
Warning! To reduce the risk of serious injury, read the following safety instructions before
assembling and using the greenhouse.
Please check with your local governing authority/local municipal codes regarding
installation of structures before assembly.

IMPORTANT:
· Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list.
· If any part is missing, or if you have any questions, contact the service center at 1-(844)-805-0378
(toll free).
· Place all parts from the box in a cleared area and position them on the floor in front of you.
· Remove all packing materials and place them back into the box. Do not dispose of the packing
materials until assembly is complete.
· Read each step carefully before beginning any assembly and make sure you understand each step.
If you are missing a part, please call our toll-free number for assistance 1-(844)-805-0378.
· Needed for assembly: (The following tools are not included)
2 - 3 people
Pistol Drill Tape Measure Ladder
Screwdriver Hexagon wrench

Part List 3
G-P1
G-P1
G-P1
F-19
F-19
F-B05
F-B06
F-24
F-09
F-18i
F-06
F-07
F-B07
F-17i
F-01
F-05
F-08
F-02
F-15
F-11
F-10
F-21
F-13
F-02
F-04
F-25
F-28
F-04
F-26
F-27
F-23
F-B06
F-20
F-18
F-18
F-23
G-P1
G-P2
F-12
G-P3L
G-P2
F-B05
G-P3R
F-16b
F-03b
F-14b
F-29
F-30
F-48
F-48

Notes:
1. Remove approximately 2 inches of film from all sheet edges before installing. Remove all film
immediately after the constructions completed.
2. The UV-protected side of the sheet is covered with opal white film and must face towards the
sun.
Two sides of PC sheet are covered with thin film, one side's film is transparent, another's
film is opal white. The UV-protected side of the sheet is covered with opal white film and
must face towards the sun.
Front
Rear
F-31a F-31a F-31a
F-33a F-31b F-32a
F-32a F-33a
F-31a F-31a
F-38
F-40
F-38
F-39
transparent film
PC sheet
Opal white film
POLYCARBONATE PANEL
SUN
F-34 F-35
F-34 F-35
F-34
F-34
F-34
F-34F-35
F-35
F-37 F-36
F-35
PC Board 4

F-10
F-48
F-24
F-23
F-09
F-08
F-07
F-06
F-05
F-B13
F-04
F-03b
F-02
F-01
BASE
WALL AND ROOF
Length
1644
568
1100
1240
1650
1650
1105
1105
1240
1833
1833
1882
280
1
F-11 1644 1
5
4
4
1
1
2
2
4
16
3
1
4
4
SketchLabel QTY
Part List 5

Part List 6
F-40
F-36
F-35
F-34
F-33a
F-32a
F-31b
F-31a
F-B07
F-29
F-18
F-18i
F-17i
F-B06
Length
540x585
1110x585
1238x585
412x585
412x585
618x585
1217x585
1833
1815
1360
F-30 1328
1815
618
1833
1
F-19 8
1
5
6
2
2
1
5
1
4
4
2
1
2
2
F-B05 1836 2
SketchLabel QTY

Part List 7
F-38
F-22b
F-21
F-16b
F-15
F-14b
F-13
F-12
F-28
F-27
F-26
F-25
F-20
Length
590x598
376
1615
600
600
1240
572.5
580
620
F-37 577x583
550
580
360
2
F-39 251x598 1
4
1
2
2
2
1
1
1
1
1
2
1
1
Sketch
WINDOW
DOOR
Label QTY

Part List 8
0 1 2 3 4 5 6 7 8 mm
F-B15a
F-B16
G-P3R
G-P3L
G-P2
G-P1
Length
ST4x10
ST4x8
F-B14
12
6
142
1
1
2
4
Sketch
PLASTIC
SCREW
Label QTY

Step 1 9
F-02
1.1
x4 x4
1.1
F-02
F-01
F-01
F-01
F-B14
F-01
F-02
F-02
F-02
F-02
F-02
4
4
16
1.1

Step 2 10
2.1
x2 x2
2.2
F-04
F-04
F-03b F-04
F-04
F-03b
F-03b
F-04 3
1
F-B14 8
F-04
F-04
2.1
2.2

Step 3 11
F-05
F-B13
3.1
x4
3.1
x4
F-05
F-B13
F-B14
F-05
F-05
F-05
F-05
4
8
8
3.1

Step 4 12
F-19
F-18i
F-19
F-B14 4
F-19 2
F-18i 1
4.1
4.2
4.1
x2
F-19
F-05
4.1
F-18i
F-19
4.2

Step 5 13
5.1
5.2
20mm
5.1
x4
F-18
F-29
5.2
x4
F-29
F-B13
F-18
F-18i
F-18
F-29
F-29
F-05
F-B14 8
F-18 2
F-29 4
F-B13 4

Step 6 14
6.1
x2
F-30
F-30
F-B13
6.2
x4
F-19
F-30
6.3
x2
6.2
6.3
F-30
F-30
F-19
F-19
F-B14 8
F-19 2
F-30 4
6.1
F-B13 4

Step 7 15
7.3
7.1
7.2
7.27.1
x4
F-08
F-18i
x2
F-19
F-30
7.3
F-17i
x2
F-30
F-17i
F-08
F-09
F-10
F-11
F-B14 4
F-17i 2
F-08
F-09
1
1
F-10
F-11
1
1
F-17i
F-08

Step 8 16
F-23
F-04
F-B14 4
F-23 4
F-23
F-23
F-23
F-23
8.1
x4
F-23
F-B13
20mm
x4
8.2
F-18
F-23
8.1
8.2

Step 9 17
F-34
F-34
F-34 F-31a
F-34
F-34
F-34
F-31a
F-34
5
6
F-31a
F-31a
F-31a
F-31a

Step 10 18
11.1
x4
11.2
x4
F-23
F-23
F-B06
F-05
F-B06
11.1
11.2
F-B06
F-B06
F-B14
2
8

Step 11 19
10.1
F-31a
F-18i
F-48
F-33a
10.2
F-31a
F-17i
F-48
F-48
F-31a
F-18i /F-17i
F-48
F-48
F-33a
F-32a
10.2
F-48
F-48
F-48
F-18i
F-33a
F-32a
F-31b
10.1
F-48
F-B14
5
10
2
2
1
F-32a
F-33a
F-31b