East West Furniture Avondale BAETFNA User manual

Avondale Wooden Folding Table
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: BAETFNA
Description : Avondale Wooden Folding Table
Dimension : 60”L x 36”W x 30”H
Cube Size : 62.6” x 40.9” x 6.7”
NW: 37.5 LBS
GW: 48.5 LBS
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time
to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
Email: [e-mail]
175 Southbelt Industrial Drive,
Houston, TX 77047

Avondale Wooden Folding Table
- 2 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Top 1 B Leg frame 1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following
hardware:
NO Description Qty Sketch NO Description Qty Sketch
1 62
Washer
6
3
Bolt
(M8x30)
6
STEP 1
Attach Leg frame (B) to Leg frame (C) using Bolt (1), Nut (2), Washer (3) and Allen key (4). Do not fully tighten all Bolts.
Allen key
(M4mm)
4
Nut
2
CLeg frame 1
4
4 1
3 2
B
C
x2

Avondale Wooden Folding Table
- 3 -
STEP 2
STEP 3
Fold the table follow direction of arrows as shown below.
4
4
1
2
3
A
Attach Leg frame (B), (C) to Top (A) using Bolt (1), Nut (2), Washer (3) and Allen key (4). Fully tighten all Bolts.
x4