East West Furniture LAP User manual

LANCY PARSON
D
I
NING
CHAIR
-1 -
ASSEMBLY INSTRUCTIONS
SKU:LAP
Description:LANCYPARSON DININGCHAIR
ProductDimension:20"Wx24"Dx39"H
Cube Size :40.9”x18.2”x14.9”
NW:30.8 LBS
GW:37.4LBS
BEFOREASSEMBLY
Thankyou forpurchasingourproduct.Thisproduct hasbeendesigned foreasy assemblyandlonglastinguse.Pleasetake
the timetoreadandfollowtheassemblyinstructions carefully.
Be suretocheckall packingmaterialcarefully forsmallpartswhichmayhave comelooseinsidethecartonduringshipment. Pleaseseparate,identify,and
countall partsandmetalhardware.Compare with partlisttobe sure all partsare present.
Ifhardware ismissingoryouhave difficultyassemblingthisproduct,please call forus.
175 SouthbeltIndustrialDr,
Houston,TX77047
Email:[e-mail]

LANCY PARSON
D
I
NING
CHAIR
-2 -
IMPORTANT NOTE:
-Place all woodenpartsona cleanandsmoothsurfacesuchasa rugorcarpetto avoidthepartsfrom beingscratched.
-Remove all wrappingmaterial,includingstaples&packingstrapsbefore youstartto assemble.
-DONOTtightenall screwsand boltsuntil completely assembled.
-Keepall hardware partsout ofreachof children.
PARTLIST
Whenunpacking, please be carefulnotto discardanypartswiththe packaging.Before continuing, please make sure youhave the followingparts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A Chairback 1 B SeatFrame 1
C Front Leg2
ASSEMBLYTOOLSREQUIRED
NOTINCLUDED
Hardwarebag
location

LANCY PARSON
D
I
NING
CHAIR
-3 -
HARDWARELIST
Whenunpacking, please be carefulnotto discardanypartswiththe packaging.Before continuing, please make sure youhave allof thefollowinghardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Longbolt
(M6x80mm) 4
2 Mediumbolt
(M6x60mm) 4
3 Shortbolt
(M6x40mm) 2 4 LockWasher
( 6.5X9) 10
5 FlatWasher
( 6.5x19) 10
6 AllenKey
(4mm) 1
STEP1
Attach frame(B)tothe back (A)byusingbolts (3)and(1) andwashers (4)and(5). TightenslightlywithAllen Key(6).
Note:DO NOTfullytighten anybolt until theallchaircomponents areputtogether.
X4
X2

LANCY PARSON
D
I
NING
CHAIR
-4 -
STEP2
Attach frontlegs (C)tothe seatframeusing bolts (2), washers (4)and (5) .Tighten slightlywith Allen Key(6).
.
Place the chaironaflatlevelsurfacetomakesurethe chairis levelled and thentighten fullytheallbolts.
STEP3