East West Furniture HLT User manual

HARTLAND TABLE 42'' ROUND WITH SINGLE PEDESTAL
- 1 -
ASSEMBLY INSTRUCTIONS
SKU: HLT
Description HARTLAND TABLE 42'' ROUND WITH SINGLE PEDESTAL
Dimension Ф 42”x29”1/2.H
Cube Size 44.4”x44.4”x7.3” NW 44 LBS
GW 52.8 LBS
250 Canal Street,
Lawrence, MA 01840
Email: [e-mail]

HARTLAND TABLE 42'' ROUND WITH SINGLE PEDESTAL
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for
durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being
scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts
NO Description Qty S etch NO Description Qty S etch
A Top 1 B Leg 4
C Pedestal 1 D Cross piece 1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware
NO Description Qty S etch NO Description Qty S etch
1
Large flat
washer
(Φ8.5xΦ19mm)
4 2
Large lock
washer
(Φ8.5xΦ11mm)
4
3
Hexagon nut
(M8x13mm)
4 4
Wrench
(M13mm)
1
5
Small flat
washer
(Φ6.5xΦ13mm)
4 6
Small lock
washer
(Φ6.5xΦ9mm)
12
7
Bolt
(M6x35mm)
12 8
Medium flat
washer
(Φ6.5xΦ16mm)
8
9
Allen key
(M4)
1

HARTLAND TABLE 42'' ROUND WITH SINGLE PEDESTAL
- 3 -
STEP 1
Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4).
x4
C
B
1
2
3
4
STEP 2
Put the cross piece (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with
Allen key (9).
D
x4
9
7
5
6

HARTLAND TABLE 42'' ROUND WITH SINGLE PEDESTAL
- 4 -
STEP 3
Carefully place the cross frame (from Step 2) on bottom side of the table top (A), attach with bolts
(7), washers (8), (6). Tighten with Allen key (9).
A
6
8
7
9
x8