EasyLog EL-MOTE User manual

Device
OK
1 Flash / 5 Sec
Fault 1 Flash / 5 Sec
No Sounder
Single tone ring every 30 minutes
Continuous two tone ring
Alarm 1 Flash / 5 Sec
Quick Start Guide
EL-MOTE
EasyLog
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Welcome!
Let’s set up your EL-MOTE
Before you connect your EL-MOTE, you need to do a few things.
• You’ll need to set up an account on
www.easylogcloud.com so that you can
view your devices remotely.
• Download the EasyLog Cloud App
on your phone or tablet
• Have your WiFi network details to hand
Not an Apple or Android user? Visit the support section on
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Remove mounting
bracket
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Remove battery cover
(do not ret this until
set up is complete)
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Connect probe/s
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Install AA
batteries
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

& you’re
ready to go!
In the EasyLog Cloud App,
go to the menu, select Set
up Device and follow the
on-screen instructions
Once EL-MOTE is connected to
your WiFi network replace the
battery cover and install EL-MOTE
in its place of application
View and change device settings using the App or at
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Device
OK
1 Flash / 5 Sec
Fault 1 Flash / 5 Sec
No Sounder
Single tone ring every 30 minutes
Continuous two tone ring
Alarm 1 Flash / 5 Sec
State Front Button LED Sounder
Device Indication Overview
visual / sound state indication guide.
Quick Start Guide
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Front Button / LED Indicator
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

RESET
SETUP
Reset Button
Setup Button
Power Adapter
Probe 2 Probe 1
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30

Important Safety Information
WARNING: Failure to follow these safety instructions could result in re, electrical shock,
other injury or damage.
Repairing or modifying
Never attempt to repair or modify this product. Dismantling may cause damage that is not covered
under the warranty. Servicing should only be provided by an approved supplier. If the product has
been punctured or seriously damaged, do not use it and return it to an approved supplier.
Using connectors and ports
Never force a connector into a port. Check for obstruction in the port; make sure that the
connector matches the port and that you have positioned the connector correctly in relation to
the port. If the connector and port do not join with reasonable ease, they probably do not match
and should not be used.
Power supply
Only use 1.5V AA batteries or a genuine EL-MOTE power adapter to power your EL-MOTE data
logger.
Disposal and recycling
You must dispose of this product and batteries according to relevant laws and regulations. This
product contains electronic components and therefore must be disposed of separately from
household waste.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
www.lascarelectronics.com/data-loggers
Sales & Support
www.calcert.com [e-mail]1.800.544.2843 0
5
10
15
20
25
30