EasyLog EL-SMS User manual

www.lascarelectronics.com/data-loggers
EL-SMS QUICK START GUIDE
Quick Start Guide
@@@ [insert line diagram]
1
2
3
4
5
6
7
8
9
1Status buon
2Stop buon
3Status LEDs
4Netlight
5External temperature probe port
6Sounder
7Baery Bay
8Reset switch
9SIM card holder

www.lascarelectronics.com/data-loggers
EL-SMS QUICK START GUIDE
1. Check that there is adequate mobile signal strength from the appropriate
provider at the location where you intend to use the unit.
2. Download and install the “EasyLog SMS” App from Google Play store or the App
Store.
3. Carefully remove the battery plate and t your SIM card into the microSIM
holder.
4. Insert 4 x AA alkaline batteries into the unit and replace the battery plate.
5. Connect your probe into the external temperature probe port.
6. Open the App on your smartphone or tablet and add a new device. Use the
mobile number that was supplied with your SIM card.
7. Select the device just added and press the “Setup” button.
8. Congure the parameters to suit your intended application, then press the
“Start” button and follow the on-screen instructions. The on-screen instructions
will prepare the unit to receive the conguration SMS and send the message.
9. Once the conguration has been completed, you will receive a “Setup complete”
message and the unit will begin monitoring.
The full EL-SMS User Manual can be downloaded from the Support section of our
website at lascarelectronics.com/support.