Eaton ZB4-209-DS2 Manual

1/2
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio
安装说明
Инструкция по монтажу
Montagehandleiding
Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Montaj talimatı
Інструкція змонтажу
تﺎـــــﻤﻴﻠﻌﺘﻟا رﻮـــــﺸﻨﻣ
08/21 IL05009003Z
ZB4-209-DS2
aScrew terminal for PROFIBUS-DP cable
Signal Colour codes
A1, A2 RxD/TxD-N green
B1, B2 RxD/TxD-P red
a
A1 B1 A2 B2
ZB4-900-KB1
6 mm9 mm7.5 mm
(0.24")(0.35")
(0.3")

08/21 IL05009003Z
2/2 © 1998 Eaton Industries GmbH
EU: Eaton Industries GmbH, Hein-Moeller-Straße 7-11,
53115 Bonn, Germany
Eaton.com/contacts
Eaton.com/aftersales
Eaton.com/documentation
USA: Eaton.com/eatoncare
08/21 IL05009003Z
UK: Eaton Electric Ltd., P.O. Box 554, Abbey Park,
Southampton Road, Titchfield, PO14 4QA, United Kingdom
Eaton.com/recycling
aSwitch for bus terminating resistor
Bus connection for the first and last node on the PRO-
FIBUS. The cable must always be connected on the left
(see connector marking A1, B1).
on
off
a
R
ON
OFF