Eaton xStorage Home 3P User manual

xStorage Home 3P
Installation manual
This document is intended for Eaton certified installers
xStorage Home 3P

ii XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
The information, recommendations, descriptions and safety notations in this document are based on Eaton
Corporation’s (“Eaton”) experience and judgment and may not cover all contingencies. If further information is
required, an Eaton sales office should be consulted. Sale of the product shown in this literature is subject to the terms
and conditions outlined in appropriate Eaton selling policies or other contractual agreement between Eaton and the
purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE
SPECIFICALLY SET OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES
THE ENTIRE OBLIGATION OF EATON. THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR
MODIFY ANY CONTRACT BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or
other-wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to
damage or loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the
use of existing power facilities, or claims against the purchaser or user by its customers resulting from the use of the
information, recommendations and descriptions contained herein. The information contained in this manual is subject to
change without notice.

iiiXSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
1. INTRODUCTION ...................................................................01
1.1 Field of applications ................................................................... 02
1.2 Symbols used in this manual ............................................................ 02
1.2.1 Safety related symbols .......................................................... 02
1.2.2 Hazard symbols................................................................ 02
1.2.3 Mandatory action symbols ....................................................... 03
1.2.4 Other symbols................................................................. 03
1.3 Conventions used in this document ...................................................... 04
2. FIGURES .........................................................................05
3. CAUTION .........................................................................20
3.1 Operating environment and restrictions .................................................. 21
3.2 Suggested protections during the installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.3 Protection from electric shock ........................................................... 23
3.4 Electromagnetic fields and interferences .................................................. 24
3.5 IP Protection class rating ............................................................... 24
3.6 Warning decals and rating plate ......................................................... 24
3.7 Residual risks ......................................................................... 25
4. GENERAL DESCRIPTION ............................................................26
4.1 xStorage Home 3P High Voltage hybrid inverter............................................ 26
4.2 Operating modes ...................................................................... 26
4.2.1 “SELF-CONSUMPTION” Mode................................................... 26
4.2.2 “FEED-IN CONTROL” Mode ..................................................... 27
4.2.3 “BATTERY MANAGER” Mode.................................................... 28
4.2.4 “EMERGENCY POWER SUPPLY (EPS)” Mode....................................... 29
4.2.5 “BACKUP RESERVE” Mode...................................................... 30
4.3 High Voltage Lithium-ion battery ........................................................ 31
4.3.1 Calibration charge .............................................................. 31
4.3.2 Maintenance charge ............................................................ 32
4.4 Protective devices ..................................................................... 32
4.4.1 Anti-islanding.................................................................. 32
4.4.2 Earth leakages of the PV panels................................................... 32
4.4.3 Converter earth leakages ........................................................ 33
4.4.4 PV inputs DC switch ............................................................ 33
4.4.5 PV string fuses ................................................................ 33
4.4.6 Battery overcurrent protection and safety fuse ....................................... 33
4.4.7 Automatic battery switch ........................................................ 33
4.4.8 Additional protective devices ..................................................... 33
4.5 Touch-screen control panel ............................................................. 33
Content overview

iv XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
5. INSTALLATION ....................................................................34
5.1 Lifting, transport and unloading instructions .............................................. 34
5.2 Unpacking and checks ................................................................. 35
5.3 Checking the box contents .............................................................. 35
5.4 Positioning the xStorage Home 3P system ................................................ 35
5.5 Mounting the xStorage Home 3P system.................................................. 36
6. ELECTRICAL CONNECTIONS.........................................................37
6.1 Cautions ............................................................................. 37
6.2 PV panels connection .................................................................. 38
6.2.1 Connection of independent PV strings to PV1 and PV2 inputs ........................... 39
6.2.2 Connection of a single PV string to the PV1 or PV2 input ............................... 39
6.2.3 Connection of a single PV string to paralleled PV1 and PV2 inputs........................ 39
6.2.4 Reduction of electromagnetic disturbances – EMI suppression ferrite cores installation ....... 39
6.3 AC grid connection .................................................................... 40
6.3.1 Reduction of electromagnetic disturbances – EMI suppression ferrite cores installation ....... 41
6.4 EPS connection ....................................................................... 41
6.5 High Voltage Lithium-ion battery connection .............................................. 43
6.5.1 Reduction of electromagnetic disturbances – EMI suppression ferrite cores installation ....... 44
6.6 Earth connection (MANDATORY) ........................................................ 45
6.7 Energy meter connection ............................................................... 45
6.8 Wi-Fi connection ...................................................................... 45
6.9 LAN connection ....................................................................... 46
6.10 xStorage Home 3P connection for parallel operation........................................ 46
6.11 SMART LOAD connection............................................................... 47
6.12 System switching on................................................................... 48
6.13 System switching off .................................................................. 48
7. MAINTENANCE ....................................................................49
7.1 General information ................................................................... 49
7.2 System switching off .................................................................. 49
7.3 Uninstall ............................................................................. 50
7.4 Disposal ............................................................................. 50
8. TROUBLESHOOTING ...............................................................51
9. TECHNICAL DATA ..................................................................55
9.1 Rating plate .......................................................................... 55
9.2 Technical datasheet.................................................................... 55
10. CONTACT SUPPORT INFORMATION ..................................................56
11 GUARANTEE ......................................................................56
11 APPENDIX ........................................................................56
11.1 It aly .................................................................................. 56

1XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Thank you for installing the xStorage Home 3P system.
Before you start
This manual contains important instructions that must be followed during the installation, operation and
maintenance of the xStorage Home 3P system. All instructions must be read before installing and operating the
equipment. This manual should be retained for future reference. Please note that the xStorage Home 3P system
must only be installed by Eaton certified personnel, i.e. an Eaton technical support representative or an Eaton
certified installer. There are no user serviceable parts inside the xStorage Home 3P system. Failure to observe the
above will void the guarantee provided and Eaton cannot be held legally accountable.
This product is intended for residential application only. The contents of this manual are the copyright of the
publisher and may not be reproduced (even in extracts) without the prior written approval of Eaton Corporation.
While every care has been taken to ensure the accuracy of the information contained in this manual, Eaton
assumes no liability for any error or omission. Eaton reserves the right to modify the designs of its products. The
unauthorized copying and lending of this manual is prohibited.
Technical disclaimer
In line with our goal to continuously improve the products and the customer service we provide, all specifications
contained in this document are subject to change without notice. All drawings, descriptions or illustrations
contained in this document serve to provide a clear overview and/or technical explanation of the present product
and its various components and accessories.
Legal entity
Eaton Energy Storage
Eaton Industries manufacturing GmbH
Address:
Web:
Place de la Gare 2
1345 Le Lieu
SWITZERLAND
www.eaton.com/xstorage
1. Introduction

2XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
1.1 Field of Applications
This installation manual is intended for Eaton certified installers. It describes how to securely install and
commission the following Eaton xStorage Home three phase (3P) hybrid inverters (Table 1):
Table 1. xStorage Home 3P system overview
1.2 Symbols used in this manual
1.2.1 Safety related icons
1.2.2 Hazard icons
Imminent dangers causing serious injuries.
Danger of death.
An electric shock can be fatal.
Avoid touching internal or external normally live parts whilst the system is powered on.
Surfaces can be hot.
The equipment contains capacitors that store static electricity, which could produce dangerous
electric discharges. Make sure that the devices have discharged their energy before carrying
out any work on the equipment.
Electromagnetic fields may have harmful effects (unknown to date) on the health of people who
are subjected to long exposure. Avoid standing for long periods of time at less than 20 cm from
the inverter.
The Guards or covers can be removed only 10 minutes after disconnecting the
inverter from the power supply to allow its components to cool down and any static
electricity storage devices to discharge.
Hazardous behaviors that could cause serious injuries.
Hazardous behaviors that could cause death.
Behaviors that could cause minor injuries to people or
minor damages to things.
Eaton xStorage Home 3P
Power Part Number Product Description
5 kVA XSTH3P050P075V01 XSTH Inverter 3Ph 5 kW PV 7.5
6 kVA XSTH3P060P090V01 XSTH Inverter 3Ph 6 kW PV 9
8 kVA XSTH3P080P120V01 XSTH Inverter 3Ph 8 kW PV 12
10 kVA XSTH3P100P150V01 XSTH Inverter 3Ph 10 kW PV 15

3XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
1.2.3 Mandatory action symbols
1.2.4 Other symbols
Read the instructions. These instructions are intended for Eaton certified installers.
The notes preceded by this symbol relate to technical issues and ease of operations.
IP21 Protection class rating.
A threaded plug fuse cannot be used as a load circuit breaker.
Do not use measuring instruments with a maximum input voltage lower than 1000 V.
During the installation, make sure that the inverter is powered off.
The EU Directive on Waste Electrical and Electronic Equipment (WEEE).
Should the noise level exceed legal limits, the working area must be circumscribed and all the
people who have access to the area must wear ear defenders or ear plugs. The noise level
produced by the inverter in normal working conditions is: < 50 db.
A first aid kit must be provided. Do not underestimate burns or wounds.
The instructions provided in this manual do not replace the safety regulations and the installation
and operational technical data printed on the products, nor do they replace the current safety
standards enforced in the country where the equipment is installed, and the rules dictated by
common sense.
The Eaton certified installer must be an expert in the field and must therefore be responsible
for commissioning the system according to the manufacturer’s instructions and local legislation.
Any repair or replacement of parts of the system must be performed exclusively by Eaton
certified installers.
The ropes and vehicles used for lifting must be suitable for withstanding the weight of
the equipment.

4XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
1.3 Conventions used in this document
This manual adopts the following type conventions and acronyms to refer to Eaton xStorage Home system
or its parts:
• Screen type represents information that appears on the screen or LCD display (used to indicate screen
content inside the text).
• ALL CAPITALS highlights critical points that require careful attention.
All abbreviations used in this document are listed in the Table 2 Glossary.
Table 2. Glossary
Abbreviation Description
AC Alternating Current
BAT Battery
BMS Battery Management System
DC Direct Current
EMC Electromagnetic compatibility
EMI Electromagnetic interference
EPS Emergency Power Supply
FW Firmware
HV High Voltage
HW Hardware
IEC International Electrotechnical Commission
IP Internet Protocol
LAN Local Area Network
LCD Liquid Crystal Display
NNeutral
OV Over Voltage
PE Protective Earth
PPC Point of Common Coupling
PPE Personal Protective Equipment
PV Photovoltaic
RCD Residual Current Device
RCMU Residual Current Monitoring unit
SoC State of Charge
SW Software
UI User Interface
WEEE Waste Electrical and Electronic Equipment

5XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 1. Simplified xStorage Home 3P system installation
1
7 8 9
2 3
4
5 6
Number Description
1PV1 string
2PV2 string
3Battery
4Emergency power supply (EPS)
5Interlock system
6Privileged loads or critical loads
7Public grid
8Energy meter
9Home loads or non-critical loads
2. Figures

6XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 2. xStorage Home 3P installation steps
10 cm
50 cm +40°C 21 kg
-10°C
14 x 2 3 4 5 6
220
4 x Ø5,2
366
663
50 cm
50 cm
4 x 2 x
2 x
1
25 Kg
Number Description
1Installation steps

7XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 3. xStorage Home 3P connection panel
76
8 9 10
54321
Number Description
1ON/OFF switch
2DC switch
3PV1 string input
4PV2 string input
5Battery connector
6AC grid
7EPS output
8Energy meter and battery management system wiring input
9LAN and AUX wiring input
10 CAN wiring

8XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 4. DC coupled xStorage Home 3P system installation
xStorage Home 3P
PV1
BMS
BAT
PE
NL1
N
N
L1
L1 L2 L3
L2
L3
RCD RCD
L2 L3 PE NL1 L2 L3 PE
PE
PE N L1 L2 L3PE
PV2
1
2
54
3
6 7
3
Number Description
1AC grid
2Emergency power supply (EPS)
3Energy meter
4External interlock system
5Battery
6Home loads or non-critical loads
7Privileged loads or critical loads

9XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 5. xStorage Home 3P PV connections
PV1 PV2
+
_
+
_
Figure 5.A
Figure 5.B
Figure 5.C
PV
+
_
+
_
+
_
+
_
PV

10 XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 6. Ferrite core installation sequence on PV cables

11XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 7. AC grid cable and connector on the panel
Figure 8. Ferrite core installation sequence on AC grid cable and on PE cable
1
M10
EPS
GRID
C150
C146
C144
C156
M6 M7
C162 C163
TZ14
TZ13
C152
C145
C153
C151
Number Description
1AC grid cable

12 XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 9. xStorage Home 3P system installation
xStorage Home 3P
PV1
N
N
L1
L2
L3
L3L2
RCD RCD
L1N
L1 L2 L3 PE
PE
PE L3L2L1NPE
NL1 L2 L3 PE
PE
BMS
BAT
PV2
1
2
3
3
6 7
45
Number Description
1AC grid
2Emergency power supply (EPS)
3Energy meter
4External interlock system
5Battery
6Home loads or non-critical loads
7Privileged loads or critical loads
Ground connection to PE on the neutral conductor (N) where required by law

13XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Number Description
1RJ45
2CAN BATT
3BMS communication
4Battery
5BMS port
Figure 10. ESP cable and connector on the panel
M10
EPS
GRID
C150
C146
C144
C156
M6 M7
C162 C163
TZ14
TZ13
C152
C145
C153
C151
1
Number Description
1EPS cable
Figure 11. Battery connection and BMS communication cable on the panel
RS485
RL4
NC NO COM
CANBATT CANEXT LAN
_
+_
+
5
4
3
2
1

14 XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 12. Ferrite core installation sequence on battery cables

15XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 13. Extended earth terminal to the PE protective conductor
Figure 14. Meter wiring illustration
1
RS485
RL4
NC NO COM
CAN BATT CAN EXT LAN
2
4
3
5 6
1
The connection of the
external earth terminal to the
PE protective conductor is
mandatory.
Number Description
1Protective Earth (PE)
Number Description
1RJ45
2RS485
3Meter communication
4Public grid
5Energy meter
6Home loads or non-critical loads

16 XSTORAGE HOME 3P INSTALLATION MANUAL MN700009EN August 2020 www.eaton.com
00
Title
Figure 15. Network connection illustration
Figure 16. LAN wiring illustration
12
3
RS485
RL4
NC NO COM
CAN BATT CAN EXT LAN
2
3
3
4
5
1
Number Description
1Dongle Wi-Fi
2Router
3Cloud
Number Description
1RS45
2LAN
3LAN cable
4Router
5Cloud
Other manuals for xStorage Home 3P
3
This manual suits for next models
4
Table of contents
Other Eaton Storage manuals

Eaton
Eaton xStorage Home 3P User manual

Eaton
Eaton Cutler Hammer SRAM PC104 User manual

Eaton
Eaton xStorage 400 User manual

Eaton
Eaton xStorage Home 3P User manual

Eaton
Eaton xStorage Compact User manual

Eaton
Eaton C-632X User manual

Eaton
Eaton RE Series User manual

Eaton
Eaton Cutler-Hammer SRAM PC104 User manual

Eaton
Eaton xStorage Compact 20 kW User manual

Eaton
Eaton xStorage Home 3P User manual