EAW Commercial | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 1 Part No. SW0139 Rev. A 07/04
FEATURES
.. Discrete component 60 W power amplifier
.. Signal processing loop
.. Multiple priority override circuits
.. 2 rack unit mounting kit included
DESCRIPTION
The CAM60 is designed for continuous duty in speech, music,
paging, and sound reinforcement applications demanding high
performance, flexible features, and rugged dependability. Each
of the four, actively balanced, mic/line inputs have combination
XLR-1/4 in input jacks and a sensitivity switch for line level, mic
level, or mic-level with 24 V DC phantom power. Aux stereo and
telephone paging inputs are also provided as well as a signal pro-
cessing loop.
Input 1 has voice-activated priority over Inputs 2 to 4 and the Aux
Input. Inputs 1 to 4 have switch-activated priority over the Aux
input. The Telephone Paging input has voice-activated priority
over all inputs. The front panel includes Mic/Line input, Aux, and
Master level controls, as well as bass and treble. An LED meter
indicates signal strength and output overload. An internal 1 watt
amplifier with level control allows monitoring the Aux input.
The CAM60 provides outputs for 4 ohm loads and for 25 V, 70 V,
and 100 V distributed systems. The output stage has smart cir-
APPLICATIONS
.. Paging Systems .. Houses of Worship
.. Hotel and Ballrooms .. Meeting Rooms
.. Schools .. Offices
.. Foreground/Background Music Systems
PERFORMANCE
Input 1-4 (balanced / unbalanced)
Sensitivity Impedance
Mic 0.5 mV / 1 mV 600 ohm
Line 50 mV / 200 mV 47k ohm
Aux In (unbalanced)
Aux 100 mV 20k ohm
Tuner 180 mV 30k ohm
Tape 320 mV 50k ohm
CD 570 mV 80k ohm
Tel/Paging (balanced / unbalanced)
Variable 600 ohm
Main In (unbalanced)
1 V 10k ohm
Output
Maximum Load Impedance
Preamp 1 V (nominal) 600 ohm
Monitor 1 W 8 ohm
Low Z 60 W 4 ohm
High Z 25 V / 70 V / 100 V 10 ohm / 83 ohm / 170 ohm
Operating Range (+/-3 dB)
Mic In to Amp Out 50 Hz to 15 kHz
Noise
>60 dB (below maximum output)
Distortion (THD, 60 W @1 kHz)
<0.5%
PHYSICAL
Front Controls
Type Range
Input 1-4 Level 0 to 10
Aux Level 0 to 10
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Volume Level 0 to 10
Power AC mains On / Off
Rear Controls
Input 1-4 Select Line/Mic/Phantom 24V
Power Switch 24 V DC On / Off
Aux Select CD/Tuner/Tape/Aux
Tel & Mon Vol Level
Mains Power
Rating Fuse
AC (50/60 Hz)
115 V / 230 V (+/-5%)
2.5 A fuse
DC 24 V 15 A fuse
Power Input 132 W
Environmental
Maximum Ambient 131° F / 55° C
Humidity Non-precipitating
Dimensions (inches / mm)
H x W x D 3.9 x 17.1 x 13.2 100 x 435 x 335
Weight (approximate net lb / kg)
22.3 10.1
CAM60
5 Input x 1 Output 60 W Mixer-Amplier
cuitry to protect against permanent damage caused by overload-
ing, shorts, and extreme temperatures. The CAM60 operates on
115 V or 230 V AC mains determined by a voltage select switch.
A 24 V DC power input allows connecting backup battery power
with automatic AC to DC switchover. Five year warranty.
CAM60-MIXER AMPLIFIER
© 2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAM60-MIXER AMPLIFIER
