ebi Noir Deluxe User manual

PRODUCT SPECIFICATIONImPORTANT SAFETy INFORmATION
!
ENGLISH
PRODUCT SPECIFICATION
CHARGING mETHOD
PRODUCT SPECIFICATION
CHARGING INSTRUCTIONS
Adapter: input AC 100V~240V 50/60Hz
output DC 5V 1000mA
Rechargeable battery type: Li-ion (3.7V 2200mAh)
Charge time: approx. 3 hours
Using time: approx. 240 mins
1. Put the connecting plug into the slot of charge stand.
2. Put the adapter plug into the socket.
3. Place the clipper into charge stand
after conrming power off ;
4. The charge prompt Icon lights up
while charging.
• The clipper can be directly
connected to the adapter to charge.
• During use the clipper can
connected directly to the adpter.
NAmE OF PARTS
ACCESSORIES
blade
fuselage
lock key
blade adjustment button
on/off switch
LCD display
connecting plug
adapter
RPM control
1.The best charging temperature: 5°C - 40°C.
2.Battery needs charging for approx. 3 hours,and it will reach the
best condition after charging 3 - 4 times.
3.It’s normal phenomenon to give out heat while charging &
using.
4.Please use original adapter to charge.
2 3
1
For your own protection from injuries and electric shocks, the
following information must be observed when using
electrical equipment:
• Read all the instructions before using the appliance!
• Only use animal clippers to cut animal hair and animal fur.
• Only connect the appliance to an AC mains power supply. Note the rated voltage.
• Never touch electrical equipment that has fallen into water. Disconnect first.
• Never use electrical equipment in the bath or shower.
• Always position or store electrical equipment where it can not fall into water
(e.g. washbasin).
• Do not allow electrical equipment to be exposed to water or other liquids!
• Only use the appliance in dry rooms.
• Always disconnect from the mains immediately after use.
• Disconnect from the mains before cleaning the appliance.
• This appliance is not suitable for use by people (including children) with physical, sensory
or mental disabilities or who do not have the relevant experience or knowledge of using
such appliance, unless under the supervision of or after having received instruction in
the use of the appliance by an individual who is responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Only use the appliance for the proper use as described in the operating instructions.
Only use accessories recommended by the manufacturer.
• Never use the appliance if the mains cable is damaged. Furthermore, do not use the
appliance if it is not working correctly, if it has been dropped, if it is damaged or if it has
fallen into water. In these cases, deliver this item back to your vendor who will take care
of a properly reparation.
• Do not hold the appliance by the mains cable to carry it and do not use the cable as a
handle.
• Keep the mains cable away from hot surfaces.
• Make sure that the mains cable is not twisted or kinked when stored.
• Never insert or allow any objects to fall into the openings of the appliance.
• Never use the appliance where aerosol (spray) products are being used or where oxygen
is released.
• To prevent injury, never use the appliance if the blade set is damaged.
• Initial Operation. Before starting the appliance, always check the lubricating condition
of the blade set. Oil the blade set, if and when necessary. Only connect the appliance
to the socket while it is switched off. Should the cutting process be interrupted, always
switch off the appliance.
Clipper head
3/6 mm
Clipper head
9/12 mm
Cleaning
brush
Oil clipper
head care
Charge
standard
MANUAL - deluxe PHT-102
g0236161116_651-435267_clipper_NOIR_102_MANUAL_english.indd 1 06-02-17 11:10

PRODUCT SPECIFICATIONNOTESCLEANING
LOADING BLADE
1. Confirm the position of
the blade and change the
settings to 1.9mm.
2. Add the blade on the product.
EUROPET BERNINA INTERNATIONAL B.V.
P.O. Box 6 - 5420 AA Gemert-Bakel
The Netherlands
B.T.W. nr. NL 8143.40.015.B01
WEEE-Reg-Nr: DE 18134493
[email protected] - www.ebi.eu
PRODUCT SPECIFICATION
When the battery power is less than 5%, the charging icon starts
to flash to remind you to charge the clipper.
• After starting, if you do not use any key operation within two
minutes, the screen will close to save electricity.
• Please charge for 3 hours before using the new product.
• After full-charged, the product will smart off power, starting
over- charge protection to prevent over-charge.
• When the product is completely without electricity, the product
will start the discharge protection to protect battery life.
PRODUCT SPECIFICATIONBLADE ADJUSTmENT FUNCTION
1. To adjust upward, push the adjustment button
directly to the required position.
2. To adjust downward press the lock key down
and then push the adjustment button to
the required position.
PRODUCT SPECIFICATIONLOADING & UNLOADING COmB
• LOADING COMB
Hold the both side,match the slot
and push on (avoid losing or
dropping).
• UNLOADING COMB
Push the locked part of the comb
on both sides away (do not press
the front or back part, it may hurt
the comb).
LCD FUNCTION DESCRIPTION
RPM CONTROL FUNCTION
Real-time display shows the running speed of the
product. RPM setting method press “-” or “+” to
set RPM. RPM setting range: 5000-7000
INTELLIGENT CONSTANT RPM CONTROL
FUNCTION
The product maintains a constant speed. When
using the product it can automatically compensate
by decline in the speed of cutting resistance.
RUNNING LIGHT
In the starting state, the running light starts to run
clockwise, the higher speed, the faster cicle goes.
BATTERY POWER REAL TIME DISPLAY
Real-time display shows the power of the Li-ion
rechargeable battery.
CLEANING PROMPT FUNCTION
When the blade is full and filthy, the cleanning icon
will start to flash to remind you should unload the
blade to clean and oiling.
OILING PROMPT FUNCTION
When the blade is full and filthy or the prdouct has
accumulated 60 minutes of running, the oiling icon
will to flash to reminding you to oiling the blade.
• When alarm continues after cleaning and oiling, the blade has
been worn, please replace a new blade.
6 7
4 5
1. 2.
upper blade
lower blade
AUTOmATIC CHARGE FUNCTION
1. Do not tear down the clipper randomly. Do not drop the
clipper.
2. Do not clean product by water flush and keep the unit away
from damp situation.
3. Do not use any corrosives such as alcohol, gasoline etc. to
clean the surface.
4. Avoid charging above 40°C or below 0°C.
How to deal with the battery?
Inside is Li-ion battery. Before abandoning please take the
battery out and deal with the battery in an
environmental-friendly way.
34
1 2
34
1 2
1. Before unloading the blade, make sure you have turn it off
and separate the power cable from the clipper.
2. Wash the hair between the upper blade and the lower blade off
(please do not take apart the spring of the blade, in case it
breaks).
3. Clean the hair from the clipper by using the brush.
4. After cleaning the blade, add some lubricant oil between the
upper blade and the lower blade. Otherwise the cutting edge will
go dull,make weird noises, give out heat and reduces the effect.
5. Replace the blade (when you hear a click you match it right).
g0236161116_651-435267_clipper_NOIR_102_MANUAL_english.indd 2 06-02-17 11:10