Attaching the suction mount and dash cam
-When the power cable has been routed, place the suction cup
behind the rear view mirror.
-Before placing the suction mount onto the windscreen make sure
the bracket is at 90 degrees. When it locks out and becomes straight,
it will create a strong suction hold.
-The power cable must be plugged into the top of the mount. This will
power the GPS module which is integrated into the suction mount.
-Clip the dash cam body into the bottom of the suction mount.
-To unclip the dash cam body, push the small tab up. The body can be
pulled free from the mount.
-Check if the lens of the dash cam is centered. Rotate the body to adjust shooting angle to give a good view.
Simple fault resolution
Fail to boot
up
with blue light Click reset hole.
without Indicator light Check whether the cigarette lighter work well.
Pushed the GPS bracket in hard enough to make a good connection.
GPS not work
GPS signal not stable Remove potentially interfering equipment.
no GPS at all Check if the cigarette lighter is plug on the bracket USB port.
Memory Card
"no memory card" Change a memory card, ensure it's genuine class 10 or higher.
"Low speed memory
card!" Change a memory card with speed at least 10MB/S .
"Memory Card is Full" Delete locked files in EVENT folder.
GDR player Have bug Uninstall it completely, clean cache file then reinstall.
If the problem could not be solved , we are really sorry for that, Please contact us :