Ecomax ELG09 User manual

ALTON INDUSTRY LTD. GROUP
643 Innovation Drive West Chicago, IL 60185
info @ altonindustries.com
https://www.altonindustries.com
MADE IN CHINA
30M RETRACTABLE GARDEN HOSE
REEL LNSTRUCTION MANUAL
WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious personal injury. Save this instructions in a safe
place and on hand so that they can be read when required.
Model:ELG09

CONTENTS
FEATURES 01
01
02
02
03
05
07
SCOPE OF DELIVERY
INTENDED USE
DESCRIPTION OF SYMBOLS
GENERAL SAFETY INSTRUCTIONS
ASSEMBLY & INSTALLATION
OPERATION
TROUBLE SHOOTING
CLEANING AND MAINTENANCE
08
09
WARRANTY 10

01
https://www.altonindustries.com
02
[e-mail]
The 30m Retractable Garden Hose is
designed for home water applications using
cold water only. Please note that this 30m
Retractable Garden Hose has not been
designed for use in commercial, trade or
industrial applications.
This appliance is to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The
user/operator, and not the manufacturer,
shall be liable for any damage or injury
resulting from such cases of misuse or by
using the hose for any task other than its
intended purpose.
The manufacturer shall not be liable for any
unauthorised changes made to this product,
nor for any damage resulting from such
changes.
Please read and familiarise yourself with this
user manual before using this 30m
Retractable Garden Hose.
INTENDED USE
This 30m Retractable Garden Hose is
manufactured with a high quality hose. The
slow automatic rewind function allows
greater control when retracting the hose.
The retractable garden hose has a wall
mountable bracket that allows for a full 180 °
range of motion, and the ability to lock the
hose at any length to ensure the hose
remains in place as you water. When
installed and used correctly, this product
should provide you years of good service.
DESCRIPTION OF SYMBOLS
The rating plate on the product and in this
user manual may show the following
symbols. These represent important
information about the product or
instructions on its use.
Read and understand user
manual before using this product.
Denotes risk of personal injury,
loss of life or damage to the tool
in case of non-observance of the
instructions in this manual.
Non-potable water.
FEATURES
Wall Mounting Bracket
1
Pivot Bar
2
Carry Handle
3
Hose Reel Housing
4
Hose Stop
5
Outlet Hose
6
Spray Gun
7
SCOPE OF DELIVERY
1x Retractable Garden Hose 30m
1x Wall Mounting Bracket and Pivot Bar
4x Screws & Wall Plugs
1x Spray Gun
1x Instruction Manual
Inlet Hose
8
13 2
4
756
8

GENERAL SAFETY
INSTRUCTIONS
WARNING! Read the entire user
manual carefully. Understand and
Save all warnings and instructions for
future reference.
Please save this instruction manual. Please
ensure you give this instruction manual to
the next person that uses this product.
Do not allow the hose (6) to retract
unassisted. This may damage the hose
reel (4)and spray nozzle fitting (8).Always
walk the hose (6) back to the hose reel
(4) at a steady pace.
Do not open the hose reel housing
(4).The internal spring mechanism is
held under tension and is dangerous if
released. lf leaking or retraction
problems occur, please contact the after
sales support for advice and assistance.
Do not leave water turned on with the
hose under pressure when not in use.
Always turn the water off and release air
pressure from the hose after use.
Only cold water must be used with the
hose reel.
03
https://www.altonindustries.com
04
[e-mail]
Do not place force on the hose reel
housing (4). Doing so may damage the
housing() or the wall mounting bracket
(1).
Children should not be allowed to
operate or play with the retractable
garden hose
Ensure children are clear of the hose (6)
and hose reel housing (4) when
unwinding and rewinding.
GENERAL SAFETY
INSTRUCTIONS (CONT.)
Always turn the water off at the tap when
the retractable garden hose is not in use,
and when unwinding or winding the
hose (6) on the reel.
After use, turn off the tap and release the
water pressure from the hose before
retracting the hose (6) back to the reel.
Do not allow the hose (6) to be exposed
to very high or very low temperatures for
prolonged periods of time. High
temperatures can damage the hose
causing it to split, and low temperatures
can cause the hose to lose flexibility
making it difficult to retract.
Do not use any chemicals or substances
with this hose (6) such as acetone, white
spirits, lactic acid, etc. Use of these
chemicals will damage the hose and void
the warranty.
Do not submerge the hose reel housing
(4) into water to clean it. Keep the hose
reel housing (4) and hose (6) clean by
wiping it with a damp cloth when fully
extended.
Mount the hose reel housing (4) in a
sheltered and shaded location in order to
prolong the life expectancy and to ensure
a maximum period of trouble-free service.
When not in use for extended periods, it is
best to store the hose reel in a garage or
shed.
When you have finished watering, turn
off the water at the tap and release the
pressure prior to retracting the hose.
IMPORTANT! Please check with your local
government body or local water provider
for any active water restrictions in your
area.
When the hose (6) is extended to such a
length that the warning indicator can be
seen (approx. 1 metre from the end of the
hose), do not pull the hose (6) with any
excessive force as this can damage the
internal connection to the reel.
Do not try to force the direction of which
the hose (6) is retracting. Instead, allow
the self layering mechanism to feed the
hose (6) slowly onto the reel automatically.
lf the hose (6) accidentally drops and
retracts itself, it is strongly recommended
that you extend the hose (6) to its full
length and then permit it to retract
smoothly as you walk it back to the hose
reel housing(4). This will allow the self-
layeringmechanism to layer the hose
correctly on to the reel.
Carry the hose reel housing (4) using the
built-in carry handle (3).
follow all safety instructions before
operating the hose. Failure to follow the
warnings and instructions many result in
serious injury.

ASSEMBLY & INSTALLATION
1x Cordless Drill with 10mm Drill Bit
1x Hammer
1x Carpenter's Pencil
1x Socket Set (10mm)
TOOLS REQUIRED FOR ASSEMBLY
(NOT SUPPLIED):
1. Choose a suitable position on a sturdy
wall. Where possible, we recommend
mounting the base of the wall mounting
bracket (1) about 85cm above ground level
and up to 1.5m away from the tap.An extra
hose with appropriate fittings (not supplied)
can be used to connect the tap to the hose
reel.
FIXING THE WALL MOUNTING
BRACKET TO A WALL
TIP: Mount the hose reel housing (4) in a
sheltered and shaded location in order to
prolong the life expectancy and to ensure a
maximum period of trouble-freeservice.
2. Use the wall mounting bracket (1) to mark
the four hole positions on the wall using a
carpenter's pencil (Fig.1). Ensure that the
arrow on top of the the wall mounting
bracket (1) is facing upwards (Fig.2).
IMPORTANT! The wall mounting bracket(1)
must be mounted to a strong surface, due
to the weight of the hose reel when full of
water and the pulling action during use.
Brick or timber post surfaces are suitable.
TIP: We recommend using a spirit level (not
supplied) to ensure the holes are vertically
aligned.
NOTE: The supplied φ6x63mm screws and
φ10x43mm plugs are suitable for masonry
anchoring. lf you wish to mount the hose
reel housing (4) to a wooden pole, use only
the supplied φ6x63mm screws.
3. Use a cordless drill (not supplied) with an
10mmdrill bit (not supplied) to drill holes
into the 4 marked holes in the wall (Fig.2).
4. Insert the four plastic anchors into the wall.
Use a hammer (not supplied) to gently push
the wall plugs into the drilled holes in the
wall.
5. Position the wall mounting bracket(1)on
the wall, ensuring that the arrow on top of
the wall mounting bracket (1) isf acing
upwards. Use the 10mm socket(not
supplied) to tighten the four screws into the
four holes in the wall to secure the wall
mounting bracket (1) in place (Fig.3).
INSTALLING THE RETRACTABLE
HOSE REEL TO THE WALL
MOUNTING BRACKET
Align the rear end of the hose reel
housing(4) with the two vertical holes in the
wall mounting bracket (1) and insert the
pivot bar (2) through the wall mounting
bracket (1) and rear end of the hose reel
housing(4) (Fig.4).
ASSEMBLING THE HOSE TO
THE TAP
1. Connect the spray gun on the main
hose(6).
2. Attach the short connecting hose to your
tap.
3. The retractable hose reel is now ready to
be used.
05
https://www.altonindustries.com
06
[e-mail]

07
https://www.altonindustries.com
08
[e-mail]
TROUBLE SHOOTINGOPERATION
release the pressure prior to retracting
the hose. IMPORTANT! Please check with
your local government body or local
water provider for any active water
restrictions in your area.
1. The hose reel has been equipped with a
click-lock mechanism. To operate, pull the
hose (6) out to the desired length, and
when you stop pulling, the hose (6) will
automatically stop.
WARNING: When the hose is extended
to such a length that the warning
indicator can be seen (approx. 1 metre
from the end of the hose), do not pull the
hose with any excessive force as this can
damage the internal connection to the
reel.
2.To start watering, turn on the water at the
tap.
3. When you have finished watering, turn
off the water at the tap and release the
pressure in the hose (6) prior to retracting
the hose (6).
4. To engage the automatic hose recoil, give
the hose (6) a short sharp pull and you will
feel the hose (6) automatically retract. You
can interrupt this process by pulling the
hose (6) again.
When you have finished watering,
turn off the water at thetap and
NOTE: In order to retract the hose (6) safely,
ensure you keep hold of the end of the
hose (6) while walking towards the hose reel
housing (4). Do not let go of the hose
(6).Letting go of the hose (6) may result in
personal injury.
WARNING: Do not try to force the direction
of which the hose (6) is retracting. Instead,
allow the self layering mechanism to feed
the hose (6) slowly into the hose reel
housing (4).
WARNING: lf the hose (6) accidentally
drops and retracts itself, it is strongly
recommended that you extend the hose (6)
to its full length and then permit it to retract
smoothly as you walk it back to the hose
reel housing (4).This will allow the self-
layering mechanism to layer the hose (6)
correctly into the reel.
WARNING: Do not open the hose
reel housing(6) at will. lt is very
Don't Open!
dangerous and can cause personal injury.
See below picture.
Hose (6) will not retract the
entire length.
Hose (6) is stuck and cannot
be retracted or extended.
Hose (6) is difficult to
pull out.
Wall mounting bracket(1)
is coming off the wall.
Hose (6) is kinking.
Water pressure greatly
reduced.
1.Turn off tap and pull the hose (6) out completely.
2. Remove the spray nozzle fitting (8) to release excess
pressure.
3. Slowly retract the hose (6) back into the reel.
4. Check for physical damage (e.g.reel making a
clunking noise, visible cracks in side cover, hose reel
box smashed, etc)
1. Pull the hose (6) until fully extended. This may
require a lot of pulling force.
2. Check to see if the hose (6) has come off the drum.
lf so, please contract After Sales Support.
ls the hose reel mounted high enough? The hose reel
should be mounted at a height that is parallel to the
user. If the hose reel is mounted too low, the hose (6)
may rub on the aperture making it harder to pull out.
1. Check that the wall mounting bracket (1) has been
installed the right way up. The arrow on the wall mounting
bracket (1) must be facing in the upwards direction.
2. Check that all 4 screws are secured to the wall.
3. Send a photo to After Sales Support email.
1. Ensure the hose reel is mounted high enough, if too
low the hose (6) can rub on the aperture and cause kinks.
2. Always walk the hose (6) out as needed, do not stand
at the hose reel and pull the hose (6) out and allow it to
pool at your feet because a kink can occur when you
then walk it out.
1.This product is not suitable for use with very low
water pressure.
2. Check pressure when spray gun(7) is detached.
3. Fully extend hose (6), inspect for kinks, remove any
possible pinch points.
PROBLEM SOLUTION

CLEANING AND
MAINTENANCE
Do not allow the hose to be exposed to
very high or very low temperatures for
prolonged periods of time. High
temperatures can damage the hose
causing it to split, and low temperatures
can cause the hose to lose flexibility
making it difficult to retract.
Do not use any chemicals or substances
with this hose such as acetone, white
spirits, lactic acid, etc. Use of these
chemicals will damage the hose and void
the warranty.
Do not submerge the reel into water to
clean it. Keep the hose clean by wiping it
with a damp cloth when fully extended.
Mount the reel in a sheltered and shaded
location in order to prolong the life
expectancy and to ensure a maximum
period of trouble-free service.
When not in use for extended periods, it is
best to store the retractable garden hose in
a garage or shed. Simply remove the pivot
bar (2) to remove the hose reel housing (4),
and place the hose reel housing (4) together
with the pivot bar (2) in a dry storage area,
out of the reach of children.
WARRANTY
ALTON INDUSTRY LTD. GROUP
2 YEAR LIMITED WARRANTY
This warranty covers any defects in materials or workmanship of the enclosed
product. Alton Industry Ltd. Group will repair or replace any defective
materials due to craftsmanship of the product. This warranty does not cover
any problem caused by misuse, abuse, accidents or acts of God, such as
floods or hurricanes. Consequential and incidental damages are not covered
under this warranty. Coverage terminates if you sell or otherwise transfer the
ownership. If you feel you have a defective product, please submit a copy of
your receipt to the address below and call 1-888-899-0146 for instructions
prior returning this item to the store or sending back to:
Alton Industry Ltd. Group
643 Innovation Drive
West Chicago, IL 60185
We will inspect the product and contact you within 72 hours to give you the
results of our inspection. We reserve the right to repair or replace the product
at our discretion. However, we may replace the product with one of similar
but not exact features. Parts and Service Information available call Alton
Industry at 1-888-899-0146. This warranty gives you specific legal rights. You
may have other rights which vary from state to state.
09
https://www.altonindustries.com
10
[e-mail]