EcoxGear EcoSoundstation User manual

1 2
EcoSoundstation
Models: GDI-EXSNDST800...820
User Guide

3 4
IMPORTANT SAFETY INFORMATION
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)
AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions – All the safety and operating instructions should be read before this
product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for
future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. This apparatus can be used in outdoor conditions after disconnected the AC Mains supply and
closing the waterproof cap for the AC inlet. It must not be used in outdoor conditions when
charging. Do not use this apparatus near water – The appliance should not be used near water or
moisture – for example, in a wet basement or near a swimming pool, and the like'
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart
or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
11. Do not install this equipment in a confined or building-in space such as a book case or similar
unit, and remain a well ventilation conditions. The ventilation should not be impeded by
covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
12. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
15. The battery (battery or batteries of battery pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
AVIS
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the appliance.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
17. Keep a minimum distance of 5cm around all edges of the display for sufficient ventilation.
18. The ventilation should not be impeded by covering the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
19. No naked flame sources, such as lighted candles, should be placed on the apparatus.
20. Operating Environment: temperature: 5 degree-35 degree, Humidity: 10% to 90%
non-condensing, altitude: 0-2000m. Safety way to remove the battery or the battery from
the equipment: Remove the old battery or battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the environment and bring on possible threat to
human and animal health, the old battery or the battery put it in the appropriate container
at designated collection points. Do not dispose of batteries or battery together with other
waste. It is recommended that you use local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the
like. Do not remove battery incorporated with product for your safety. If you need to replace the
battery, take it to the nearest authorized EcoSoundstation service point or dealer for assistance.
Safety way to remove the battery or the battery from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of
the environment and bring on possible threat to human and animal health, the old battery or the
battery put it in the appropriate container at designated collection points. Do not dispose
of batteries or battery together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive
heat such as sunshine, fire or the like. Do not remove battery incorporated with product for your
safety. If you need to replace the battery, take it to the nearest authorized EcoSoundstation service
point or dealer for assistance.
Correct Disposal of this product. This marking indicates that this product should not
be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental safe
recycling. WEEE directive
Rating Label
The product rating label is located
on the battery cover.

5 6
EcoSoundstation Layout Important: Maintaining Waterproofness
Your EcoSoundstation is only waterproof when the BACK CAPS are
properly closed. In order to properly close the caps, be sure the caps fit
flat and flush along the edges with the back panel. If not properly closed
the unit is NOT watertight and may not float.
OPEN HERE
Control Panel
Metric Ruler
Rugged Carrying
Handle
Connect +
Power Ports
FRONT
BACK
RIGHT SIDE
LEFT SIDE
Built-In
Speakerphone
Mic Location
Imperial (U.S.) Ruler
Subwoofer
Battery
Compartment
Bottle Opener

7 8
Connect +Power
AUX Jack
USB Jack
Microphone Jack
Main Power Switch
x2 AC Outlets
Power Cable Jack
In/Out Connections
Do NOT use these connections if they are wet.
Microphone Input: You can input a microphone, guitar, or other musical
instrument. Port is ¼" (6.35 mm). (Dynamic Mic Only).
Auxiliary Input: This 3.5mm auxiliary jack can be used to connect a CD
player, MP3 player, etc.
USB Charging Port: Connect your device’s charge cable here. USB
charging only functions when the EcoSoundstation’s power is turned on.
USB port rating is 5V, 1A.
AC Outlets: While the EcoSoundstation is plugged into a wall power
outlet, connect your tools to either of the 2 AC Outlets.
Power
Do NOT plug unit into a wall power outlet if power cable jack is wet.
Use Caution: 120V AC Power Input. Contact may cause electric shock and
injury if wet.
Insert the included power cable to charge the EcoSoundstation.
Note: The EcoSoundstation can be played while battery charges.
The icon will be on when plugged into AC power. When the power
cable is connected, blinking of the shows the battery is charging. When
fully charged, the will be lit without blinking. It can take 5 to 9 hours to
fully recharge the battery from empty.
Notes:
· Fully charge prior to first use (5 to 9 hours).
· Fully charge prior to extended storage (5 to 9 hours).
· Do NOT leave a unit plugged in and charging continuously for more
than 8 hours after the unit indicates a full charge.
· Contact Grace Digital at www.gracesupport.com prior to attempting
to replace battery.
· Avoid completely draining the battery.
· Avoid storing in high temperatures and moist places.
· For long-term storage, periodically recharge the battery.
· If you do not charge the battery for six months, it may not charge.

9 10
Display +Controls
TOP
1. Power Button: Turns EcoSoundstation on or off.
2. Bluetooth Button: When in Bluetooth mode, if the Bluetooth icon
is not flashing on the LED screen, press this button to enter pairing
mode. If your device is paired (solid icon on LED screen), press button
to disconnect. Press and hold this button for 5 seconds to clear all
pairing records.
3. Mode Button: Press this button to cycle through the following
modes: Bluetooth, FM, AM, and AUX.
4. EcoConnect Button: If you have purchased a second
EcoSoundstation (or one other ECOXGEAR speaker bearing the
EcoConnect symbol), press and release this button on both speakers
to link them together and play in stereo.
5. EcoTalk Button: This button activates your Voice Assistant (Siri and
OK Google).
6. Track Buttons: Press these buttons to go to the previous/next track
on a paired Bluetooth device.
7. Play/Pause Button: Press to play or pause a track from a paired
Bluetooth device.
8. Microphone Volume Controls: Press to adjust the microphone
volume. Press and hold to adjust the volume continually (volume
levels are 0 to 8).
9. Master Volume Controls: Press to adjust the speaker’s main mix
volume. Press and hold to adjust the volume continually (volume
levels are 0 to 15).
10. AM/FM Presets: Store up to 6 of your favorite AM/FM radio stations
and quickly tune to a preset radio station.
11. Tune Buttons: Press these buttons to tune in a radio station. To
“seek” (jump to the next available station), press and hold either
button down for a few seconds until it starts to seek a station.
12. Bass Boost Button: Press for an enhanced bass experience.
13. LED Screen Icons:
When the battery level is
less than 20%, the first
bar will blink.
Two speakers are paired
via EcoConnect.
Indicates that the battery
level is very low.
In pairing mode, the
icon will flash. If the
connection is successful,
the icon will be solid.
Indicates the battery level
of the EcoSoundstation.
Indicates the AC power is
plugged in.
The EcoSoundstation is in
the Bluetooth mode.
Indicates the speaker
volume level of
EcoSoundstation
(0 to 15).
Indicates the current
AM station of the
EcoSoundstation.
The EcoSoundstation is in
AUX mode.
Indicates the
microphone vol. level
of EcoSoundstation
(0 to 08).
The EcoSoundstation is in
FM mode.
Indicates the current
FM station of the
EcoSoundstation.
The EcoSoundstation is in
AM mode.
P5 P6P4
P2 P3P1
BASS
BOOST
MASTER
VOLUME
MIC VOLUME MODE
10
13
1
611
2
5
7
3
9
12
4
8
Cup Holder Screw Bin

11 12
Operations
Power On/Off
Main Power Switch: The EcoSoundstation has a separate Main Power
Switch and Standby Button . The switch MUST be set to the ON
position to power your EcoSoundstation. Once the switch is set to ON,
use the Standby Button located on the top panel to turn the unit On/Off.
When not in use for extended periods, turn the Main Power Switch off to
preserve battery life.
Power On: Press briefly to power on the EcoSoundstation. “Power
on” voice prompt will be heard.
Power Off: Press briefly to power off the EcoSoundstation.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Turn on your EcoSoundstation. It will announce, “Power on.” If already
powered on and not in Bluetooth mode, press MODE to cycle
through the modes until BT (Bluetooth) appears on the screen.
3. Navigate to your Bluetooth device’s setup screen, find ECOXGEAR
and connect. If the connection is successful, the LED Bluetooth
Indicator will be lit solid blue and your EcoSoundstation will announce
“Connection successful.”
Notes:
· If the pairing is not complete within 5 minutes, the speaker will exit the
pairing mode. In this case, you need to repeat the pairing steps again.
· After the connection is successful, if you turn the speaker off and on
again, the speaker will reconnect to the last connected device
automatically. Also, the voice prompt, “Power on” followed by,
“Connection successful” will be heard.
· Press and hold for 5 seconds to clear all pairing records.
Adjust the Master Volume
1. Press MASTER VOLUME briefly to adjust the speaker volume.
2. Press and hold MASTER VOLUME to adjust the speaker
volume continuously (volume levels are 0 to 15).
a. Press briefly to increase one volume level. Press and hold to
keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to
keep decreasing the volume until minimum volume level is reached.
Adjust the Microphone Volume
1. Press MIC VOLUME briefly to adjust the microphone volume.
2. Press and hold MIC VOLUME to adjust the microphone
volume continuously (volume levels are 0 to 8).
a. Press briefly to increase one volume level. Press and hold to
keep increasing the volume until maximum volume level is reached.
b. Press briefly to decrease one volume level. Press and hold to
keep decreasing the volume until minimum volume level is reached.
Notes:
· This function only adjusts the external microphone input jack.
· The internal microphone used for EcoTalk (the activation of voice
assistants, such as Siri and OK Google, on your device), and phone calls
is not independently adjustable from the Master Volume.
P5 P6P4
P2 P3P1
EQ MASTER
VOLUME
MIC VOLUME MODE
P5 P6P4
P2 P3P1
BASS
BOOST MASTER
VOLUME
MIC VOLUME MODE

13 14
Mode Button
Press MODE briefly to cycle through the following modes:
BT (Bluetooth), FM, AM, AUX.
Play Music (Bluetooth Mode)
After the EcoSoundstation is connected to your Bluetooth device,
press briefly on the EcoSoundstation to play, press
again to pause.
Press briefly to play previous song. Press briefly to advance
to the next song.
Press MASTER VOLUME to adjust the volume.
Notes:
· Pair and connect your Bluetooth device with EcoSoundstation before
using this feature.
· If a call is received when you are listening to music, the music will
pause automatically.
· You can also control Volume and Play / Pause music operations from
your Bluetooth enabled device.
Radio Listening (AM/FM Mode)
Press MODE briefly to switch to FM or AM. Press the Tune buttons
or to tune in a radio station. To “seek” (jump to the next available
station), press and hold either or down for a few seconds until it
starts to seek a station.
Press MASTER VOLUME to adjust the volume.
Note:
· For best reception while listening to the radio, do NOT charge the unit,
and unplug the power cable.
AM/FM Presets
Store a favorite radio station to quickly tune to a preset radio station.
There are 6 positions for AM stations and 6 positions for FM stations.
While listening to a station you want to store, press and hold a preset
button (P1~P6) to assign the current station to that preset number. The
LED screen will flash 2 times to indicate when a preset has been set.
If you want to listen to a stored preset, press a preset button (P1~P6) to
go to the stored radio station.
Bass Boost Button
Press BASS BOOST to toggle between the Default Audio Setting and
Bass Boost Setting.
EcoTalk
Press the EcoTalk button to activate the voice assistant on your device
(Siri, OK Google, etc.). Once activated, the speakerphone mic on your
EcoSoundstation will hear your voice commands and transfer them to the
voice assistant on your device.
Notes:
· Before using the EcoTalk function, your device must be connected to
the EcoSoundstation via Bluetooth.
· Not all devices have voice assistant functionality; refer to your device
for details.
P5 P6P4
P2 P3P1

15 16
EcoConnect - Wireless Stereo
Connection of Two Speakers
When you have two EcoSoundstation speakers and want to wirelessly
pair them for stereo sound, first follow the Pairing a Bluetooth Device
instructions to connect one EcoSoundstation speaker to your Bluetooth
device. Leave this EcoSoundstation speaker powered on and connected to
your device.
Next, place the two EcoSoundstation speakers next to each other
and turn on your second EcoSoundstation speaker. Once the second
speaker is powered on (the Bluetooth light will be flashing), press the
EcoConnect Button on both of your EcoSoundstation speakers.
Wait a few seconds for the speakers to wirelessly connect. Both speakers
will announce “Connection successful, speakers paired” and the LED
EcoConnect Indicator on both units will light up blue once the connection
is completed.
Once the two EcoSoundstation speakers are connected via EcoConnect,
start playing music from your device. Both connected EcoSoundstation
units will play the music from you device.
The EcoConnect default has your speakers playing in stereo mode. If you
would like to change which speaker is left or right or if you want to set
each speaker to play in mono mode you can press and hold . Each
press and hold of will change the speaker from RIGHT / LEFT to
LEFT / RIGHT to MONO.
The EcoConnect connection between the two EcoSoundstation speakers
will NOT automatically re-connect after the speakers are turned off. To
re-establish EcoConnect between the speakers, after power off, please
follow the above steps.
Notes:
· You can also pair the EcoSoundstation with any other ECOXGEAR
speaker bearing the EcoConnect symbol .
· The EcoConnect functionality is only available while using Bluetooth as
your audio source at a maximum range of 30 feet between both of the
paired speakers.
· While pairing the two EcoSoundstation speakers, make sure that the
speakers are within a few feet of each other.

17 18
Troubleshooting
The sound is distorted
Try lowering the volume control of your connected device or musical instrument.
Also, try to reduce the overall volume of the EcoSoundstation.
Cannot pair with Bluetooth device
Make sure that your device is compatible with Bluetooth. Turn off your
EcoSoundstation and Bluetooth device, then power on and reconnect. Make
sure that Bluetooth mode is selected on your EcoSoundstation.
There is a high-pitched whistling noise when using microphone
This is probably feedback. Point the microphone away from the speaker.
There is poor AM/FM reception
To adjust AM/FM reception, rotate the unit and/or move entire product to a
different location. For best reception while listening to the radio, do NOT charge
the unit, and unplug the power cable.
Cannot play music from a flash drive
The USB port is only for charging USB devices. The EcoSoundstation cannot
play music via the USB port.
Volume level is too low
Increase the volume on the EcoSoundstation and / or increase the volume on
your Bluetooth device.
Battery not properly charging
Make sure that the power cord is properly plugged into the EcoSoundstation and
wall outlet. Allow up to 9 hours to fully charge the EcoSoundstation. Please do
NOT attempt to fix your EcoSoundstation unit. Please contact our Customer
Support at [e-mail] or call us at 800.903.9524.
Specifications
Unit Weight
22 pounds
Bluetooth Compliance
Bluetooth V 4.1
Bluetooth Frequency Band
2.402~2.480GHz ISM Spectrum
Modulation
GFSK, π/4-DQPSK, 8DPSK
Bluetooth Range
Up to 100 ft / 30m
Tweeter
2'' (50.8mm) tweeter
Woofer
6.5'' (165mm) full range woofer
Passive Woofer
11.2’’ x 5.1” (285 mm x
130 mm) woofer
Audio Output Power
70 W (peak)
Power Source
12V, 5.8Ah SLA Battery
USB Output
5V, 1A
EcoConnect
TrueWireless Stereo (TWS)
EcoConnect Range
30 ft / 9.1 m between
left and right speaker
Compatibility
Mobile phone/device supporting
Bluetooth V1.1 (and above)
Radio Frequency Range
US: AM 520 - 1710 kHz,
FM 87.5 - 107.9 mHz
Storage Temperature
-40°F to 122°F / -40°C to 50°C
Operating Temperature
23°F to 95°F / -5°C to 35°C
Play Time
Up to 50 hours of play time,
approximately 10 hours of play time
at maximum volume
Charging Time
Approximately 9 hours
Waterproof / Dust Rating
IP67
Dimensions
OPEN HERE
15.2 in / 386 mm
16.5 in / 419 mm
9.2 in / 234 mm

19 20
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.) This device may not cause harmful interference, and
2.) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation
between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the
receiver is connected, consult the dealer or an experienced radio/TV technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure
condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1.) This device may not cause interference, and
2.) This device must accept any interference, including interference that may cause undesired operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker
has been tested to IP67 waterproofing standards, which means the speaker can be submerged in up to 3 feet of water for 30
minutes without any damage. However, the speaker is NOT intended for constant underwater use.
Always make sure the cap(s) / cover(s) are clean, free from sand or debris, and correctly fitted. The speaker will only meet IP67
ratings if all rubber seals, gasket(s) and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion, gently
shake the unit to clear excess water. If your speaker is exposed to salt water, clean it thoroughly after use with fresh water.
The power cable and the unit with an improperly fitted cap are NOT waterproof.
To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect water has entered the unit. In this
situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will
repair or replace the unit free of charge.
SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended.
CAUTION: Do NOT open to repair. A qualified technician must carry out repair work.
ATTENTION: Do NOT charge while the unit is wet. Towel dry the unit AND make sure all connections are dry
BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and
may void the warranty.
WARNING: Danger of explosion if battery is incorrectly replaced.
CAUTION: The unit can be used with the main power cord disconnected, the unit is readily operable with the main power
cord disconnected.
ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at www.gracesupport.com or a certified recycling agent to
dispose of the unit.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
SAFETY:
This product has a limited life span of use and should be replaced when it shows obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so could cause damage to the unit, allowing
water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker. Audio levels should be appropriate to your
environment, comply with all local regulations, and always ensure that you can hear and be aware of any potential hazards
around you.
You should always
1.) Use the ECOXGEAR speaker in accordance with any music or noise rules and regulations.
2.) Properly seal the ECOXGEAR prior and after each use when in humid or water environments to avoid water damage to the
internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in a salt
water environment and that the unit is properly rinsed off after use.
3.) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage.
4.) Store your unit with all caps properly sealed to avoid long term internal moisture damage inside your unit.
5.) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
6.) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe
impact that may have affected the integrity of the unit to take on water.
You should never
1.) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be
potentially hazardous and cause fire or a spark.
2.) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the
integrity of the speaker, housing, or gaskets. In the event of a severe impact to your unit, please return the unit to Grace
Digital to review for potential damage.
3.) Never open the auxiliary doors in a water environment. This could cause water to ingress into the unit which could
potentially be hazardous and cause a fire or a spark.
4.) Never connect a device to the auxiliary input jacks when in a water environment. The auxiliary jacks should only be used in
a dry environment.
5.)Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS:
1.) The unit is waterproof only when the caps and door are properly closed.
2.) Close the caps and door properly before use. If the unit is placed in water without the caps or door properly closed, water
may enter into the unit and void your warranty.
3.) Dry unit completely before opening the caps or door. Do NOT open the caps or door if wet or in a wet environment.
4.) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment.
5.) Do NOT use or store the unit in places with high temperature.
6.) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic fields.
7.) Periodically check the rubber seal on the caps and door for premature wear.
8.) Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, sand are on the rubber seal
ring. Do NOT use any oily solvent or chemicals for cleaning.
9.) Rinse off the unit with tap water after use in salt water or swimming pool.
10.)Power and / or charge the built-in rechargeable battery for portable use by connecting the provided 16V, 1.5A power supply
cable to an AC outlet.
11.) Noise and audio distortion may occur when the batteries are nearing end of charge.
12.) Do NOT remove the built-in battery. Do NOT remove the grill covers.
LIMITED MANUFACTURER’S WARRANTY:
EcoSoundstation is covered by a 3 year limited warranty that covers defects in workmanship and / or materials for a period
of 3 years from original purchase date. This warranty does not apply to any products which have been abused, neglected,
modified or used for a purpose other than the one for which they were manufactured. Please refer to the above care and
maintenance instructions for suggested care details. The warranty is valid only for the original owner who purchases the
unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace
any out-of-stock or discontinued product with a comparable product. Discontinued products may not be available for
warranty replacement. Any contents are NOT covered by the limited manufacturer’s warranty. Warranty terms may be
revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product &
warranty information.
EcoSoundstation by ECOXGEAR, a division of Grace Digital Inc., San Diego, California.
Designed in California. Made in China.
Patents Pending.