Edelbrock 9629 User manual

®
HARDENED PUSHRODS
CATALOG #9629, #9630, #9631, #9632, #9633, #9637, & 9638
(See Description Below)
INSTRUCTIONS
•PLEASE study these instructions carefully before installing your new pushrods. If you have any questions or problems, do
not hesitate to contact our Technical Hotline at: 1-800-416-8628, 7 am - 5 pm, Monday-Friday, Pacific Standard Time
or e-mail us at edelbrock.edelbrock.com.
•DESCRIPTIONS
#9629 - For Small-Block Chevrolet V8s, 5/16" diameter (+.100” Longer Than Stock)
#9630 - For Small-Block Chevrolet V8s, 5/16" diameter (standard length)
#9631 - For Big-Block Chevrolet V8s, 5/16" diameter (standard length)
#9632 - For Small-Block Ford V8s, 5/16" diameter (standard length)
#9633 - For 351 M/400 Ford V8s, 5/16" diameter (standard length)
#9637 - For 343-401 AMC V8s, 5/16” diameter (standard length)
#9638 - For Chrysler Magnum 5.2L & 5.9L V8s, 5/16” diameter (standard length)
•PUSHRODS: These pushrods are manufactured from case hardened tubing. They are designed to be used in engines with
or without hardened steel guideplates. Guideplate slots must be correct width for 5/16" pushrods. Lube all parts thoroughly
upon installation. Use moly lube (preferred) or motor oil.
Hardened Pushrods
Brochure #63-0098
©2004 Edelbrock Corporation
Rev. 8/04
®
Hardened Pushrods
Brochure #63-0098
©2004 Edelbrock Corporation
Rev. 8/04
•PLEASE study these instructions carefully before installing your new pushrods. If you have any questions or problems, do
not hesitate to contact our Technical Hotline at: 1-800-416-8628, 7 am - 5 pm, Monday-Friday, Pacific Standard Time
or e-mail us at edelbrock.edelbrock.com.
•DESCRIPTIONS
#9629 - For Small-Block Chevrolet V8s, 5/16" diameter (+.100” Longer Than Stock)
#9630 - For Small-Block Chevrolet V8s, 5/16" diameter (standard length)
#9631 - For Big-Block Chevrolet V8s, 5/16" diameter (standard length)
#9632 - For Small-Block Ford V8s, 5/16" diameter (standard length)
#9633 - For 351 M/400 Ford V8s, 5/16" diameter (standard length)
#9637 - For 343-401 AMC V8s, 5/16” diameter (standard length)
#9638 - For Chrysler Magnum 5.2L & 5.9L V8s, 5/16” diameter (standard length)
•PUSHRODS: These pushrods are manufactured from case hardened tubing. They are designed to be used in engines with
or without hardened steel guideplates. Guideplate slots must be correct width for 5/16" pushrods. Lube all parts thoroughly
upon installation. Use moly lube (preferred) or motor oil.
HARDENED PUSHRODS
CATALOG #9629, #9630, #9631, #9632, #9633, #9637, & 9638
(See Description Below)
INSTRUCTIONS