
①
②
A
C
A B C D
B
D
Quick and easy connections to 5/8-inch and
1/2-inch garden hoses, sprinklers, nozzles, and or
any other garden watering tools
1
Attach
the adapter
to the nozzle
2
Simply connect
the connector
at the end of
your hose
3
SNAP the
two together
4
UNLOCK,
push down to
remove the
nozzle
Maintenance & Care
m CAUTION m
To clean the nozzle head, simply remove the head by turning the red ring counter counter-
clockwise until the ring is o. (Fig. 1 & Fig. 2)
1.
Remove the aluminum head and clean it by hand with water. Check out the inner side of
the head for any dirt. If there is dirt, use water to clean. (Fig. 3)
2.
If there is no dirt, return the aluminum head onto the nozzle head and screw the red ring
back on by turn it clock-wise.
3.
Fig. 1 Fig. 2 Fig. 3
-For outdoor use with cold water only
-Do not spray near electrical connections
-When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
This product contains chemicals known to the state of California to cause cancer, birth defects, and
other reproductive harm. For more information go to www.P65Warnings.ca.gov
UNLOCK LOCK
Secure twist-and-lock
mechanism prevents
accidental disconnection
UNLOCK
LOCK
A simple quick adapter (2 pcs) and hose connector
(1 pc) with a water stop feature included will
simplify your watering experience. Simply connect
the connector at the end of your hose, and then
attach your accessories to the adapter. You can
interchange various accessories in a just a snap
without any need to turn o your water tap as the
adapter will stop the water ow once you remove
the accessories. No more kinking or hose twisting
as the adapter allow you to swivel your hose 360°
degrees.
UNLOCK LOCK
Secure twist-and-lock
mechanism prevents
accidental disconnection