EDIFIER W860NB User manual

EDIFIER
W860NB
Bluetooth® Active Noise Cancelling
Stereo Headphones
www. edifier. com
EDIFIER International Limited
www.edifier.com
© 2019 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from
time to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product.
Picture for reference only, actual product prevails.
V1.3 |B-200-W0860N-04

EN - Product Description and Accessories
Turn ON/OFF
microUSB noise cancelling
charging port
b Multifunctional
Charging ) button
indicator
Touch screen
3.5mm audio
Indicator light
connector
Storage bag Aircraft plug
an i fl o] |
USB charging cable 3.5mm audio cable
B Operational Guide
e Charging
During using, if only red light flashes, it indicates
the headphone is at low battery level, please
use it after fully charged.
Red light steady lit = charging (5.0V == 1A)
Red light off =fully charged
Charging time: about 4 hours for a full charging
Warning: The rechargeable batteries that provide power for this product must
be disposed properly for recycling. Do not dispose of batteries in fire to prevent
an explosion.
e Power ON/OFF
___ Power on: press and hold
for 3 seconds
| Power off: press and hold
for 3 seconds
e Bluetooth Pairing
1. When turned off, press and hold the multifunctional button for about
5 seconds to turn the headphone on, wait until red and blue light flashes
alternately, then the headphone enters pairing state;
2. Set the mobile phone to search for and pair with “EDIFIER W860NB’, after
pairing is successful, blue light will flash slowly.
e Connect Two Bluetooth Devices Simultaneously
1. Pair the headphone with the first device;
2. Restart the headphone; press and hold the multifunctional button to let it
enter pairing state and pair with the second device;
3. Operate the first device to pair with the headphone again, then it is successfully
connected with two devices simultaneously.
e NFC (Near Field Communication) Function
1. Ensure your Bluetooth phone support NFC connection.
2.When mobile phone is in sleep state or black screen, it cannot pair with the
headphone via NFC connection.
3. For initial pairing, let mobile phone touch W860NB for an extended period of
time and release until W860NB enters pairing mode.
For mobile phone paired previously, turn
the headphone on and place the mobile
phone near its NFC area, then it will
automatically pair with the mobile
phone (whether Bluetooth function of
the mobile phone is enabled or not).
4. When unconnected with a device, \
enabling NFC function can connect
with it; when connected with a device,
enabling NFC function can disconnect with it.

B Functional Operation Instructions
¢ Touch Control illustration
. Pause/play
Presemmice Answer/reject call
L
"y o
Slide upward Volume up
Slide downward Volume down
slmp
4mie @
Slide right Next track
Slide left Previous track
» When the volume is set at the maximum level, there will be a prompt tone.
« Calling
Answer call: double press
Reject call: press and hold
Hang up call: double press
Answer call: press
Reject call: press and hold for 2
seconds
Hang up call: press
Enable voice assistant: double
press
Disable voice assistant: double
press
Bl FAQs
Red light instead of blue light flashes.
* The headphone is at low battery level, please recharge the headphone.
Red light is off during charging.
* Please ensure the charging device is correctly connected with the headphone.
* When the headphone is not used for long periods of time, the battery will
enter sleep state, it needs to charge about 30 minutes and then the red light
will be lit.
No sound
*» Check if the headphone is operating.
*» Check if the headphone volume is at an appropriate level.
* Check if the headphone is correctly connected with mobile phone.
* Check if the headphone is operating within a normal working range.
Call effect of the headphone is bad.
* Check if mobile phone is in an area with strong signal.
* Please ensure the headphone is within effective distance (10m) and no
obstacle between the headphone and mobile phone.
When playing music, cannot control pause/play/previous track/next track
via headphone.
* Please ensure the paired device support AVRCP (Audio/Video Remote Control
Profile) profile.
B Maintenance
During using, please read the following suggestions carefully.
* Keep the product away from humid places to avoid affecting internal circuit.
Do not use the product during intense exercise or with much sweat to prevent
sweat from dropping into the product to make damage.
* Do not put the product in places exposed to sun or with high temperature.
High temperature will shorten service life of electronic components, damage
battery and deform plastic components.
* Do not put the product in cold places to avoid damaging internal circuit board.
* Do not dismantle the product. Non-professional personnel may damage the
product.
* Do not drop, strongly vibrate, strike the product with hard object to avoid
damaging internal circuit.
* Do not use drastic chemicals or cleaner to clean the product.
» Do not use sharp objects to scratch product surface to avoid damaging shell
and affecting looking.
If the product cannot operate properly, please send it to your qualified
maintenance agency.