Eflare AT280 Operating instructions

www.eflarecorp.com
1 AA Cell Beacons: Ensure 4 x AA Batteries are inserted into the cassette
in the correct position.
2 Be sure to only use quality alkaline batteries and regularly check on their
physical condition as heavy impacts can
damage batteries. Normal battery life is
between approx. 30 hours depending on the
type of beacon.
3-4Eflare beacons are turned on and off by twisting the top lens in the
direction shown on the label below the lens.
Where there is no instruction label beacons
are turned on and off by twisting the top
lens in the direction shown
5 Beacons can be securely mounted in a rubber base.
6 Rubber base mounted Eflares sit well
on roads.
7 The cone clip is pushed up into the beacon side arm.
8 When in position the cone clip is ready to be used.
1 2
3 4
5 6
7 8
ON  OFF
FLASH  FLASHLIGHT
How to use Eflare Beacons
AA cell batteries versions

www.eflarecorp.com
9 The magnetic clip is slid up into the beacon arm.
10 In position, the magnetic clip is ready to mount.
11-12 The compact magnetic base (for AA Cell beacons)
replaces the normal end cap.
13 The Eflare bag has been developed to securely contain up to 6 rubber
bases and 6 Eflare beacons.
14 Eflares are efficient in the work situations because the lens
concentrates the light which gives excellent
distance for the beam and allows people to
work above with minimal glare.
910
11 12
13
How to use Eflare Beacons
AA cell batteries versions
0
1
2
3
10
33
20
66
30
99
40
132
Metres
Feet
50
165
7
10
Metres (Height)
Feet (Height)
3o
5o
0
0
60
198
4
5
13
15
14