Eizo FlexScan S2100-M User manual

Important
Please read this User’s Manual and Setup
Manual (separate volume) carefully to
familiarize yourself with safe and effective
usage.
PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Setting
2-7 Locking Buttons
2-8 Setting Adjustment menu Display
2-9 Viewing Information/Setting Language
2-10 Setting BrightRegulator
2-11 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
3-2 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm (Option)
5-2 Cleaning
5-3 Specifications
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)

SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING
may result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION
may result in moderate injury and/or property or
product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2005-2006 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information
Although every effort has been made to ensure that this maosre󷾤󹴑M󷿶󴏡u󷢡󲩵%󷀱󽾱-%%󲾡󲀑󷡤Mm󳒧6󳃡󰣢]6󳃡󳾡󹾲󰂱6󳃡󳾡󹾲󴎤󰾱󴒤󹳡󳾩”M󶀩 󷀡

1
PRECAUTIONS
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]

2PRECAUTIONS
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.

3
PRECAUTIONS
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.

4PRECAUTIONS
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.

5
PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing
pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels: 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate
or damage your LCD panel. Leave the screen white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes.Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

6CONTENTS
CONTENTS
PRECAUTIONS ......................................................1
LCD Panel................................................................... 5
To use the monitor comfortably............................... 5
Chapter 1 Features and Overview .....................7
1-1 Features............................................................ 7
1-2 Buttons and Indicators.................................... 7
1-3 Functions and Basic Operation...................... 8
Chapter 2 Settings and Adjustments ..............10
2-1 Utility Disk...................................................... 10
●Disk contents and software overview............... 10
●To use ScreenManager Pro for Medical........... 10
2-2 Screen Adjustment.........................................11
Digital Input...........................................................11
Analog Input .........................................................11
2-3 Color Adjustment........................................... 14
Simple adjustment [CAL Switch mode]............. 14
●CAL Switch Mode............................................. 14
●To select CAL Switch mode name.................... 14
Advanced Adjustments [Adjustment menu]..... 15
●To select an appropriate mode for images....... 15
●To set/adjust color ............................................ 16
2-4 Off Timer Settings.......................................... 16
●To set monitor power-off time [Off Timer] ......... 16
2-5 Screen Size Selection.................................... 17
●To change screen size [Screen Size]............... 17
●To adjust brightness of non-display area
[Border Intensity].............................................. 17
2-6 Power Indicator/EIZO Logo Display Setting
......................................................................... 18
●To turn off the Power indicator while a screen is
displayed [Power Indicator Setting].................. 18
●To display EIZO logo
[EIZO Logo Appearing Function]...................... 18
2-7 Locking Buttons ............................................ 18
●To lock operation [Adjustment Lock]................. 18
2-8 Setting Adjustment menu Display................ 19
●To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Translucent/Orientation]................................... 19
2-9 Viewing Information/Setting Language....... 20
●To check settings, usage time, etc. .................. 20
●To set a language to be displayed
[Language] ....................................................... 20
2-10 Setting BrightRegulator................................ 20
●[BrightRegulator] to set “Enable” or “Disable” for
BrightRegulator................................................. 20
2-11 Resumption of Default Setting..................... 20
●To reset color adjustment [Reset]..................... 20
●To reset all settings [Reset].............................. 20
Chapter 3 Connecting Cables.......................... 21
3-1 Connecting Two PCs to the Monitor............ 21
●To set auto-switching of input signals
[Input Signal] .................................................... 22
3-2 Connecting Peripheral USB Devices........... 22
Chapter 4 Troubleshooting...............................23
Chapter 5 Reference .........................................25
5-1 Attaching an Arm (Option)............................ 25
5-2 Cleaning.......................................................... 26
5-3 Specifications ................................................ 27
5-4 Glossary ......................................................... 29
5-5 Preset Timing................................................. 31

7
Chapter 1 Features and Overview
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• Dual-input compliant (DVI-I and D-sub mini 15-pin connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency: Analog: 24 - 80 kHz, Digital: 31 - 76 kHz
• Vertical scan frequency: Analog: 49 - 76 Hz (1600 × 1200: 49 - 61 Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
Resolution: 1600 dots × 1200 lines
• Compatible with frame synchronization mode (59 - 61 Hz)
• Smoothing (soft - sharp) function for adjustment of enlarged images
• BrightRegulator function incorporated
• DICOM mode (CAL Switch function)
• The utility software “ScreenManager Pro for Medical” (for Windows) to
control the monitor from a PC with mouse/keyboard is included (refer to the
EIZO LCD Utility Disk).
• Height adjustable stand
• Ultra slim bezel
• Portrait/Landscape display available
1-2 Buttons and Indicators
Buttons
1. Adjustment menu (*ScreenManager ® )
2. Senser (BrightRegulator)
3. Input signal selection button
4. Mode button
5. Auto adjustment button
6. Enter button
7. Control buttons (Left, Down, Up, Right)
8. Power button
9. Power indicator
Indicator status Operation status
Blue The screen is displayed
Yellow Power saving
Off Power off
* ScreenManager
®is an EIZO’s nickname of the Adjustment menu.
NOTE
• While a screen is displayed, the blue
power indicator can be turned off (see
“To turn off the Power Indicator while
a screen is displayed,” on page 18).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time” on page 16.
NOTE
• This monitor supports the Portrait/
Landscape display. (The panel can be
turned 90 degrees clockwise.)
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “5-1 Attaching an Arm” on page
25.)
• Select “Portrait” for <Orientation>
on <Others> menu of the Adjustment
menu to turn the menu 90 degrees.

8Chapter 1 Features and Overview
1-3 Functions and Basic Operation
To adjust the screen and color
1Screen Adjustment
(Automatic Adjustment)
Press .
Press again while the message window
is displayed.
Adjustment menu (Refer to page 9 for operation)
• The Adjustment menu and the CAL Switch mode name
cannot be displayed at the same time.
Color Adjustment
Simple Adjustment [CAL Switch mode]
This function allows easy selection of a desired mode
from five modes according to monitor application.
CAL Switch mode
Page 14
Brightness Adjustment
Press or to adjust brightness.
Page 11
2Screen Adjustment
(Advaced Adjustment)
[Adjustment menu]
●[Clock] to remove vertical bars ……see page 12
●[Phase] to remove horizontal flickering
and blur/distortion …………………see page 12
●[Position] to correct screen position
………………………………………see page 12
●[Range Adjustment] to adjust color
gradation automatically ……………see page 13
●[Smoothing*] to adjust blurred texts/lines
………………………………………see page 13
*Function marked with * are also available for
digital input.
Page 11
Color Adjustment
Advanced Adjustment [Adjustment menu]
●“Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” and “Gain” can be set for
each mode (Custom/sRGB/Text).
Settable functions vary with the display mode.
Resuming the default settings
●Reset color adjustment [Reset] ……see page 20
Page 15
Analog input only
Page 15

9
Chapter 1 Features and Overview
Information/Language
●[Information] to check settings, usage time, etc.
●[Language] to select Adjustment manu language.
To make useful settings/adjustments
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press . The main menu appears.
(2) Select a function with / / / , and press . The sub menu appears.
(3) Select a function with / / / , and press . The adjustment/setting menu appears.
(4) Adjust the selected item with / / / , and press . The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the sub menu and press .
(2) Choose <Exit> from the main menu and press .
NOTE
• The Adjustment menu can also be exited by pressing twice quickly.
• <Exit> or <Return> can also be selected by pressing the button twice in the Main menu or Sub menu.
Adjustment menu (Refer to below for operation)
Set the off timer
●[Off Timer] to set the monitor power off time
………………………………………see page 16
Change the screen size
●[Screen Size] to change screen size
………………………………………see page 17
●[Border Intensity] to change the brightness of non-
displayed area of image ……………see page 17
Power Indicator Setting
●[Power Indicator Setting] to turn off the indicator
while the screen is displayed………see page 18
Adjustment menu settings
●[Menu Size/Menu Position/Menu Off Timer/
Translucent/Orientation] to change Adjustment
menu settings ………………………see page 19
Resume the factory default settings
●[Reset] to reset all settings…………see page 20
Connect two PCs
●[Input Signal] to set auto-switching of input signals
………………………………………see page 21
Page 20
Locking Adjustment
●[Adjustment Lock] to lock operation of the monitor
EIZO Logo Display Setting
●[EIZO Logo Appearing Function] to display or not
to display the EIZO logo
Connecting Cables
●3-1 Connecting Two PCs to the Monitor
●3-2 Connecting Peripheral USB Devices
Page 18
Page 18
Page 21

10 Chapter 2 Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
●Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to
“readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Item Overview For Windows For Macintosh
A “readme.txt” or “Readme” file ○○
Monitor information file (INF file) Available for setting the best resolution
and refresh rate for the monitor. ○−
Color Profiles (ICC Profiles) Color profiles ○○
Screen Adjustment Program Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
○○
ScreenManager Pro for Medical (for
Windows) application software A utility software program to control monitor adjustments from a PC using
its mouse and keyboard.
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later.
○−
User’s Manual of this monitor (PDF file)
●To use ScreenManager Pro for Medical
For the installation and use of ScreenManager Pro for Medical, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for Medical, connect a PC to the monitor with the supplied USB cable.
[Connection]
(1) Connect the USB port (downstream) of a USB compatible PC (or other USB hub) and the monitor’s USB port
(upstream) with the supplied USB cable.
Upstream
(2) The USB function is set up automatically upon connection of the USB cable.
Chapter 2 Settings and Adjustments

11
Chapter 2 Settings and Adjustments
2-2 Screen Adjustment
Digital Input
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
[Adjustment Procedure]
• Automatic Adjustment
1Press .
A message “Your setting will be lost if you press again now” appears for
five seconds.
2Press again while the message is displayed.
The Auto Adjustment function begins (showing a running status message)
to adjust clock, phase, display position, and resolution automatically.
If satisfactory adjustment cannot be obtained with the button,
perform the adjustment following the procedure below. When the
screen is displayed correctly, go to step 5 “Range Adjustment”.
• Advaced Adjustment
3Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 4 following the
instructions of the program.
Attention
• Wait 20 minutes or more from
monitor power on before starting
adjustments.
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
NOTE
• Auto adjustment is available using
. If satisfactory adjustment
cannot be obtained with this button,
perform advanced adjustments using
the Adjustment menu.
• Use “Screen Adjustment Program” on
the supplied EIZO LCD Utility Disk.
NOTE
• For how to start the Screen
Adjustment Program, refer to
“readme.txt” or the “Readme” file.
When you are using a Windows PC,
you can run the program directly from
the start menu of the disk.
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.

12 Chapter 2 Settings and Adjustments
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
4Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
●To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and press .
The <Clock> menu appears.
(2) Adjust the clock with or , and press .
The adjustment is completed.
●To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press .
The <Phase> menu appears.
(2) Adjust the phase with or , and press .
The adjustment is completed.
●To correct screen position [Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and press .
The <Position> menu appears.
(2) Adjust the position with / / / to display the image
properly in the display area of the monitor.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock →Phase →Position)

13
Chapter 2 Settings and Adjustments
5Adjust the signal output range
●To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range Adjustment> from the <Screen> menu, and press
.
A message “Your setting will be lost it you press AUTO button” appears.
(2) Press while the message is displayed.
The output range is adjusted automatically to display images with the
maximum color gradation.
All the adjustments using the “Screen Adjustment Program” are completed.
6Change the smoothing setting.
●To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed, the characters or lines of
the displayed image may be blurred.
(1) Choose <Screen> from the Adjustment menu, and press .
(2) Choose <Smoothing> from the <Screen> menu, and press .
The <smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
with or , and press .
The <smoothing> menu appears.
Attention
• [Smoothing] is disabled when the
screen is displayed with a resolution
of 1600 × 1200 or 800 × 600.
• Blurring is not eliminated completely
because the screen is enlarged display.

14 Chapter 2 Settings and Adjustments
2-3 Color Adjustment
Simple adjustment [CAL Switch mode]
This function allows you to select the best display mode for monitor brightness,
etc.
●CAL Switch Mode
An appropriate display mode is selectable out of five modes.
Mode Purpose
Custom Available for making desired setting.
sRGB Suitable for color matching with sRGB compatible
peripherals.
Text Suitable for displaying texts for word processing or
spreadsheets.
DICOM-CL Available for setting tailored to X-ray film color (clear base).
DICOM-BL Available for setting tailored to X-ray film color (blue base).
CAL Switch mode name
Example: Custom
Displays current mode.
●To select CAL Switch mode name
(1) Press .
The CAL Switch mode name appears at the lower left of the screen.
(2) One of five modes is displayed in turn each time is pressed.
(3) Press to quit the operation.
NOTE
• The Adjustment menu and the
CAL Switch mode name cannot be
displayed at the same time.
• This menu ends automatically when 2
seconds pass after the button is
pressed.

15
Chapter 2 Settings and Adjustments
Advanced Adjustments [Adjustment menu]
Independent setting and saving of color adjustment are available for each CAL
Switch mode.
●To select an appropriate mode for images
✓: Adjustment/setting available −: Factory setting
Icon Function CAL Switch mode
Custom sRGB Text DICOM-
CL DICOM- BL
Brightness ✓✓ ✓ −−
Temperature ✓−✓−−
Gamma ✓−✓−−
Saturation ✓−✓−−
Hue ✓−✓−−
Gain ✓−−−−
Reset ✓−✓−−
Menu Description Adjustment range
Brightness To adjust the full screen
brightness as desired 0 to 100%
NOTE
• You can also adjust the brightness by pressing or .
Press after adjustment.
Temperature To select a color
temperature 4000K to 10000K in units of 500K (including 9300K).
NOTE
• The values shown in the Kelvin (K) are available only as
reference.
• The setting automatically turns “OFF” if a value under 4,000K
or over 10,000K is set.
Gamma To set a gamma value 1.8/2.0/2.2
NOTE
• Digital signal input is recommended for gamma value setting.
Saturation To adjust color saturation –128 to 127
Setting the minimum (–128) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Hue To change the flesh color,
etc. –32 to 32
Attention
• This function does not enable to display every color gradation.
NOTE
• The Adjustment menu and the
CAL Switch mode name cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of CAL Switch mode.
Attention
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to “To adjust color gradation
automatically” on page 12.
• The CAL Switch mode cannot be
changed during color adjustment. Set
the CAL Switch mode in advance
with .
• Wait 20 minutes or more from
monitor power on before starting the
color adjustment.
• Choose [Reset] from the Color menu
to revert to the default setting (factory
setting) of the color tone of the CAL
Switch mode selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.

16 Chapter 2 Settings and Adjustments
Menu Description Adjustment range
Gain To adjust red, green, and
blue to a desired color tone
respectively
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• Values shown in percentage are available only as reference.
• The <Temperature> setting invalidates this setting. The
<Gain> setting returns to the default setting.
Reset To reset the color settings
of the selected CAL
Switch mode to the default
settings.
Select [Reset].
●To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press .
(2) Select a desired function from the <Color> menu, and press .
The selected function menu appears.
(3) Adjust the selected item with / / / , and press .
The adjustment is completed.
2-4 Off Timer Settings
●To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
[Off Timer System]
Timer Monitor Power Indicator
ON time (1H - 23H) Operating Blue
Last 15 min. in “ON time” Advance Notice*1Flashing blue
“ON time” expired Power Off Off
*1When is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Off Timer> from the <Others> menu, and press .
The <Off Timer> menu appears.
(3) Select “Enable” with or .
(4) Set a monitor ON time (1 to 23 hours) with or , and press .
The Off Timer setting is completed.
[Resumption Procedure]
Press .
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.

17
Chapter 2 Settings and Adjustments
2-5 Screen Size Selection
●To change screen size [Screen Size]
This function allows you to change the screen size when a low-resolution image
is displayed.
Menu Function
Full (default setting) Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Normal Displays images with the specified resolution.
Example: Image size 1280 × 1024
(1600×1200)
Full
(Default setting) Enlarged Normal
(1280×1024)(1500×1200)
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Screen Size> from the <Others> menu, and press .
The screen size setting window appears.
(3) Select “Full,” “Enlarged,” or “Normal” with or , and press .
The screen size setting is completed.
●To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Border Intensity> from the <Others> menu, and press .
The <Border Intensity> menu appears.
(3) Adjust border intensity with or , and press .
The border intensity adjustment is completed.

18 Chapter 2 Settings and Adjustments
2-6 Power Indicator/EIZO Logo Display
Setting
●To turn off the Power indicator while a screen is displayed
[Power Indicator Setting]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Power Indicator> from the <Others> menu, and press .
The <Power Indicator> menu appears.
(3) Select “Disable” with or , and press .
The Power Indicator setting is completed.
●To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Press to power off the unit.
(2) Press again while pressing .
The EIZO logo does not appear on the screen.
[Resetting]
(1) Press to power off the unit.
(2) Press again while pressing .
The logo appears again.
2-7 Locking Buttons
●To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked • (Enter button) Adjustments/settings using
Adjustment menu
• (Auto adjustment button)
•