Eizo FlexScan T 565 User manual

ENGLISH

2
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please
read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious
injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate
injury and/or property or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2001 by EIZO NANAO CORPORATION. All rights reserved. No part
of this manual may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, or otherwise, without the prior
written permission of Eizo Nanao Corporation.
Eizo Nanao Corporation is under no obligation to hold any submitted material or
information confidential unless prior arrangements are made pursuant to Eizo Nanao
Corporation's receipt of said information. Although every effort has been made to
ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics
Standards Association.
Windows is a registered trademark of Microsoft Corporation.
ScreenManager, PowerManager, QuickSet and i·Sound are trademarks of
Eizo Nanao Corporation.
FlexScan, SuperErgoCoat and EIZO are registered trademarks of Eizo Nanao
Corporation.
As an ENERGY STAR® Partner, Eizo Nanao Corporation has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.

CONTENTS 3
ENGLISH
CONTENTS
PRECAUTIONS ............................................................................. 4
1. INTRODUCTION ............................................................................ 8
1-1. Features ....................................................................................................... 8
1-2. Package Contents ........................................................................................ 8
1-3. Controls & Connectors ................................................................................ 9
2. INSTALLATION ............................................................................ 10
2-1. Connecting the monitor to the PC .............................................................. 10
2-2. Getting Ready for Operation ...................................................................... 12
3. SCREEN ADJUSTMENT .............................................................. 13
3-1. How to use the ScreenManager ................................................................ 13
3-2. Color .......................................................................................................... 15
3-3. Fine Contrast ............................................................................................. 16
3-4. Power Save ................................................................................................ 17
3-5. Adjustment Lock ........................................................................................ 18
3-6. Connecting Two PCs to The Monitor .......................................................... 18
4. TROUBLESHOOTING .................................................................. 19
5. CLEANING ................................................................................... 23
6. SPECIFICATIONS ........................................................................ 24
7. GLOSSARY .................................................................................. 26
8. INDEX ........................................................................................... 28

4PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally shipped,
the product may not perform as stated in the specifications.
• To ensure personal safety and proper maintenance. Please read this section and the
caution statements on the monitor (refer to the figure below).
[Location of the Caution Statements]
The equipment must be connected to a grounded main outlet.
Jordet stikkontakt skal benyttes når apparatet tilkobles datanett.
PRECAUTIONS
• If the unit begins to emit smoke, smells like something is burning, or
makes strange noises, disconnect all power connections immediately
and contact your dealer for advice.
Attempting to use a malfunctioning unit can be dangerous.
• Do not dismantle the cabinet or modify the unit.
Dismantling the cabinet or modifying the unit may result in electric shock or
burn.
• Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards.
• Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage. If an object or liquid falls/spills into the cabinet, unplug the unit
immediately. Have the unit checked by a qualified service engineer before
using it again.
WARNING

ENGLISH
PRECAUTIONS 5
OK
OK
• Place the unit on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury or
equipment damage. If the unit falls, disconnect the power immediately and
have the unit checked by a qualified service engineer before using it again.
Using a unit after it has been dropped may result in fire or electric shock.
• Set the unit in an appropriate location.
Not doing so may cause damage and could result in fire or electric shock.
* Do not place in outdoors.
* Do not place in the transportation system (ship, aircraft, trains,
automobiles, etc.)
* Do not install in a dusty or humid environment.
* Do not place in a location where the steam comes directly on the screen.
* Do not place near heat generating devices or a humidifier.
• To avoid danger of suffocation, keep the plastic packing bags away
from babies and children.
• Use the enclosed power cord and connect to the standard power outlet
of your country. Be sure to remain within the rated voltage of the power
cord.
Not doing so may cause fire or electric shock.
• To disconnect the power cord, grasp the plug firmly and pull.
Never tug on the cord, doing so may cause damage and
could result in fire or electric shock.
• The equipment must be connected to a grounded main outlet.
Not doing so may cause fire or electric shock.
WARNING

6PRECAUTIONS
• Use the correct voltage.
* The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User’s Manual may cause fire,
electric shock, or other damage.
* Do not overload your power circuit, as this may result in fire or electric
shock.
* For proper connections of the power cord, be certain to plug the power cord
to the provided unit connector and directly to a wall outlet. Not doing so may
result in fire or electric shock.
• Handle the power cord with care.
* Do not place the cord underneath the unit or other heavy objects.
* Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it.
Use of a damaged cord may result in fire or electric shock.
• Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
WARNING

ENGLISH
PRECAUTIONS 7
OK
• Handle with care when carrying the unit.
Disconnect the power cord and signal cables and remove the optional unit.
Moving the unit with the cord or the option attached is dangerous. It may result
in injury or equipment damage.
• Do not move it alone. Always work with another person.
Moving it alone may cause lower back pain. Also note that the unit is heavier
at the front than at the rear.
• Do not block the ventilation slots on the cabinet.
* Do not place books or any other papers on the ventilation slots.
* Do not install the unit in a closed space.
* Do not use the unit laying down or upside down.
* Do not remove the tilt-swivel stand.
Using the unit in this way block the ventilation slots and prevents proper
airflow, leading to fire or other damage.
• Do not sit on the cabinet or place any heavy objects on the cabinet.
A unit with heavy objects on it may fall or be damaged and result in injury.
• Do not touch the plug with wet hands.
Touching the plug with wet hands is dangerous and can cause electrical
shock.
• Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a
problem.
• Periodically clean the area around the plug.
Buildup of dust, water, or oil on the plug may result in fire.
• Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric
shock.
• If you plan to leave the unit unused for an extended period, disconnect
the power cord from the wall socket after turning off the power switch for
the safety and the power conservation.
CAUTION

81. INTRODUCTION
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Display Monitor.
1-1. Features
• Horizontal scanning frequency of 30-96 kHz
Vertical scanning frequency of 50-160 Hz
• Support to sRGB standard
• Max. Brightness 300 cd/m² bright screen (when the movie mode is selected)
• Fine contrast modes, to adjust the most suitable brightness and contrast of the
screen (See page 16)
• Power saving system and off timer system (See page 17)
• Adjustment lock function, to prevent any accidental changes (See page 18)
• Dual inputs with individual color configuration (See page 18)
• The utility software “ScreenManager Pro for USB” (for Windows) which can
control the monitor from a PC with a mouse or keyboard, is included (See
readme.txt in the CD-ROM).
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing
or damaged.
•Monitor
•Power Cord
•Signal Cable (MD-C87 or MD-C100)
•User’s Manual
•EIZO Utility Disk
•EIZO USB Cable (MD-C93)
•LIMITED WARRANTY
•Please retain the packing materials for future transference.
•The EIZO USB cable is used for connecting the monitor to the PC when using the
enclosed utility software, “ScreenManager Pro for USB”.For information on how to
install this utility software, refer to the readme.txt in the CD-ROM.

1. INTRODUCTION 9
ENGLISH
1-3. Controls & Connectors
Front
(1) ScreenManager™
(2) BNC/D-SUB Selection Button
(3) AUTO/FINE MODE Button
Push the button lightly: Fine Contrast Mode
Selection button
Push the button for more than 2 seconds:
AUTO-SIZING button
(4) QuickSet™ Control Pad
(Hereinafter “Control Pad”)
(5) Power Indicator
Indicated color Power-on status
Green Power is on (Normal mode)
Flashing Green Power save mode 1
Advance notice of
monitor’s off Timer*1
Yellow Power save mode 2
Flashing Yellow Power save mode with
monitor’s off Timer*1
(6) Power Switch
(7) Power Terminal*2 (with a cover)
Rear
(8) Power Connector
(9) D-Sub Mini 15 Pin Input Connector
(10) BNC Input Connector
(11) USB Port*3
Upstream port x 1
*1Regarding the “Off Timer”, see page 17.
*2Power Terminal can be used with an optional
i·Sound Sound Unit.
*3USB Port is used for connecting the monitor to
the PC with the cord when using the
“ScreenManager Pro for USB” (See page 11).
Bottom side
(2)
(7)
(6)(5)(4)(3)

10 2. INSTALLATION
2. INSTALLATION
2-1. Connecting the monitor to the PC
• Be sure that the power switches of both of the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
• Standard graphics board
• Macintosh
Signal Cable (Enclosed)
Macintosh Adapter (Optional)
Please consult EIZO dealer.
Signal Cable (Enclosed)
Standard graphics board
Video Output Connector
D-Sub mini 15 pin
Macintosh (Blue & White)
Video Output Connector
D-Sub mini 15 pin
Macintosh
Video Output Connector
D-Sub 15 pin