Elan Z Series Z-300 User manual

SUPERIOR AUDIO...
At any listening level, you will experience a
wide range of audio dynamics. From the
subtleties of movie dialog to the finest detail
in a musical performance, the Z•300
Two-Channel Power Amplifier delivers clean,
clear power.
Boasting 150 Watts per channel at 2 ohms,
the Z•300 is designed and engineered to be
the definitive cornerstone component for any
high fidelity audio system. The Z•300’s
discrete output circuitry easily powers up to
four pair of 8 ohm speakers simultaneously,
eliminating the need for speaker selector
boxes or load protection devices. Buffered
loop outputs provide easy connection of
additional amplifiers––a necessity when you
are creating that “monster” home theater or
multi-room audio system where more than
two channels are required.
With its 1.75” low profile and elegant front
panel design, the Z•300 Power Amplifier
looks great and fits perfectly in any entertain-
ment center or rack of source equipment. Its
small stature makes room for bulkier
components that normally require two and
sometimes three rack spaces.
...QUALITY DESIGN
At the heart of this amplifier’s benchmark
design you’ll find quality components and
workmanship. Discrete amplifier output
topology guarantees audiophile sound––
power connections to each channel from the
whisper-quiet torroidal transformer maintain
channel separation, eliminating crosstalk and
intermodulation distortion. Three parallel gain
blocks per channel provide high-current drive
for high-impact bass
performance. An
extremely low THD
Enjoy the lively, detailed
reproduction of your
favorite concerto.
Enjoy natural, harmonic
midrange tones.
Experience deep thundering
bass, well-rendered vocals
and definitive highs...
...encounter the Z•300
Two-Channel Power
Amplifier by ELAN.
MONSTER
POWER
Z•300 TWO CHANNEL POWER AMPLIFIER
300

SPECIFICATIONS
POWER RATING • RMS
Output Power 2x150W @ 2.0 ohms per channel
2x100W @ 4.0 ohms per channel
FREQUENCY RESPONSE 20 Hz to 20 kHz -.5 dB
Power Bandwidth 5 Hz to 30 kHz -3.0 dB
Signal-to-Noise >110dB (A-weighted, 60W @ 8 ohms)
Channel Separation>-70dB (channel to channel @ 1kHz)
HARMONIC DISTORTION
Total Harmonic Distortion < .03% 20 Hz to 20 kHz
Intermodulation Distortion > -90dB, 5Hz to 22 kHz
Voltage Gain (Av) 28
Slew Rate >20V/microsecond
Input Impedance 33k ohms
Input Sensitivity .707 VRMS (60W @ 8 ohms)
CONNECTORS
Input Gold RCA phono
Output 5-way binding posts
POWER REQUIREMENTS 120 VAC • 440W (average)
Power Supply Ultra-high efficiency toroidal
linear supply. 40,000 uF storage
capacitance effortlessly sustains
instantaneous high current demand
DIMENSIONS/WEIGHT
Freestanding Model 1.75 x 17.0 x 10.0 inches
4.5 x 41.3 x 25.4 cm
Rackmount Model 1.75 x 19.0 x 10.0 inches
4.5 x 46.3 x 25.4 cm
Weight 13.6 lbs
2.3 kg
rating, exceptional signal-to-noise ratio
and dynamic frequency response translate
into true audio prowess.
Robust circuit protection is a standard in
all Z•Series products. Independent
thermal and short circuit protection has
been implemented to protect the unit in
the harshest operating conditions. Outputs
are safeguarded against over/under
voltages, overloads (including shorts),
thermal runaway and instantaneous
temperature peaks. The design has been
extensively tested to assure optimal
performance.
CRAFTED IN THE USA
Designed and engineered by ELAN’s
audio engineers and manufactured in our
Lexington, Kentucky facility, the highest
quality control standards have been
implemented to ensure a superior
product that will provide years of
listening enjoyment. Our commitment to
you is quality.
© ELAN HOME SYSTEMS, 1998/2002, LEXINGTON, KY 40509 • Dolby is a registered trademark of Dolby Laboratories Licensing Corporation
Extend the life of your audio electronics––ask your ELAN
dealer about the new Z•FAN2 Modular Cooling
Component.
300 2428 Palumbo Drive • Lexington, KY 40509
859.269-7760 • FAX [phone]