eldoLED DUALdrive 1060/S User manual

© 2013 eldoLED. All rights reserved. V2.4
More documentation and eldoLED’s terms and conditions are available at www.eldoled.com.
Pay attention when connecting the LED groups:
• polarity reversal results in no light output and often damages the LEDs
• combining + and - of different groups damages the driver
LEDcode / NTC
2 LED groups,
1 control channel
2 LED groups,
1 control channel
{
{
2
9 mm
0.35 inch
1
+
-
0.5-1.5 mm
2
AWG 20-16
+
-
+
-
DALI
{
N
LVAC
120-277
{
Wiring diagram DUALdrive 1060/S (DL1060S1)
WARNING: Risk of electrical shock. May result in serious injury or death. Disconnect power before servicing or installing.
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and build-
ing codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
120-277VAC
The driver accepts a universal mains voltage input of 120-277VAC,
50/60Hz.
DALI
Use these connectors to connect the driver to a DALI network. Always
combine a DA+ and DA- connector for either data input or data output.
LED wire length
Maximum wire length from LED driver to LED engine at full load:
LED groups
Indicates the location of the connectors to which you can connect your
LED groups. The four LED groups are controlled over two control
channels: DALI ballast 1 consists of LED group 1 and 2, and DALI bal-
last 2 consists of LED group 3 and 4.
Output voltage vs output current for 4 outputs with symmetrical load
Vf typ is 57V, LED current ranges from 200mA - 1050mA
LEDcode/NTC
Use these connectors to connect a 47kΩNTC thermistor for closed
loop LED engine temperature control.
AWG value 20 19 18 17 16
Distance(m)1418222836
Distance (ft) 45.9 59 72.2 91.9 118.1
Please observe voltage drop over long wire lengths.
Longer wire lengths increase EMI susceptibility.
0
1050
420
200
830
0
60V
30V
mA
Vf


eldoLED Europe bv Luchthavenweg 18a 5657 EB Eindhoven The Netherlands T [phone] F [phone] [email protected]
eldoLED America, Inc. 1762 Technology Drive # 226 San Jose, CA95110 USA T [phone] F [phone] [e-mail]
Wiring diagram DUALdrive 1060/S (DL1060S1)
Connecting 3 LED groups
Output voltage vs output current for 3 outputs with symmetrical load
Vf typ is 57V, LED current ranges from 200mA - 1050mA
Connecting 2 LED groups
Output voltage vs output current for 2 outputs with symmetrical load
Vf typ is 57V, LED current ranges from 200mA - 1050mA
Connecting 1 LED group
Output voltage vs output current for 1 output
Vf typ is 57V, LED current ranges from 200mA - 1050mA
0
1050
550
200
0
60V
30V
mA
Vf
3 outputs, 100W,

0
1050
200
830
0
60V
30V
Vf
mA
2 outputs, 100W, 
0
1050
200
0
60V
30V
mA
Vf
1 output, 60W

©2013 eldoLED. All rights reserved. More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com. V1.3
eldoLED Europe bv Luchthavenweg 18a 5657 EB Eindhoven The Netherlands T [phone] F [phone] [email protected]
eldoLED America, Inc. 1762 Technology Drive # 226 San Jose, CA95110 USA T [phone] F [phone] [e-mail]
Pay attention when connecting the LED groups:
• polarity reversal results in no light output and often damages the LEDs
• combining + and - of different groups damages the driver
Quick Start Guide DUALdrive 1060/S (DL1060S1)
Installing DUALdrive 1060/S
A Mounting the DUALdrive
B Making the wire connections
WARNING: Risk of electrical shock. May result in serious injury or death. Disconnect power before servicing or installing.
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building
codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
219 mm / 8.64”
50 mm
1.97”
LEDcode / NTC
2 LED groups,
1 control channel
2 LED groups,
1 control channel
{
{
2
9 mm
0.35 inch
1
+
-
0.5-1.5 mm
2
AWG 20-16
+
-
+
-
DALI
{
N
LVAC
120-277
{

DUALdrive is perfect for dynamic white lighting applications or for
luminaires that combine task and ambient lighting. DUALdrive excels
in configurability and low dimming - giving you every shade of white!
Symbiosis ensures the LED driver works seamlessly together with LED
modules, controls and intelligent luminaire elements.
DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 57V
outputs, square metal
Features
Electrical specifications
Driver type constant current
LED outputs 4 (UL Class 2)
LED output power 100W max
LED output current range 200-1,050mA. Settable per output.
LED output current resolution programmable in 1mA steps
LED output voltage range 2-57V
Standy power <0.5W
Input voltage AC 120-250V (ENEC approved)
120-277V (UL approved)
Input voltage DC 120-275V
Input current 1.05A @ 120V/60Hz
0.5A @ 230V/50Hz
0.45A @ 277/60Hz
Inrush current 35A 240μs at 120V/60Hz
67A 240μs at 230V/50Hz
75A 240μs at 277V/60Hz
Surge protection 3kV (L to N), 4kV (L/N to GND)
Efficiency @ full load 90%
Efficiency @ 1/2 load ≥87%
Power factor @ full load >0.94C
THD @ full load <10%
Dimming protocol DALI
Control channels 2
Ta operating range -40 °C ... +50 °C / -40 °F ... +122 °F
Tc max 83 °C / 181 °F
IP rating IP66 if used in DRYverbox 100/S
Warranty 3 years
Certifications & standards
EN 61347-1/-2-13, EN 62384, EN 55015, EN 55022,
EN 61000-3-2, EN 61547, EN 62386-101/102/207
UL 1310, UL 8750 (Class 2 output)
Dimensions, weight, packaging
LxWxH 230x80x30mm / 9.06x3.15x1.18in
Weight 912.5 g, 32.2 oz
Drivers per carton 20 pcs
Wiring
Order number configuration
D L 1 0 6 0 S 1 mA • min
LED output current: in 1mA steps, e.g. "0258", "1011" etc.
Dimming curve: enter "LOG" for a logarithmic, "LIN" for a linear
dimming curve.
Minimum dimming level: write to one decimal place, e.g. "05.0" for 5%,
"07.5" for 7.5%, "10.1" for 10.1%, etc. Leave blank if default minimum
dimming level (0.1%) is required.
Perfect for dynamic white applications•
Natural dimming, continuous to dark (Hybrid HydraDrive)•
Symbiosis: add value with sensing, connecting, protecting, tooling,
communicating, sharing and lighting dynamics features
•
Programmable to fit application•
Low inrush and THD•
High power factor and efficiency•
P/N LED output current Dimming
curve
Minimum
dimming level
Specification Submittal
DUALdrive 1060/S
Project name: Contact details:
Project number:
LED driver order number:
Europe, Rest of World
eldoLED B.V.
Science Park Eindhoven 5125
5692 ED Son
The Netherlands
[e-mail]
North America
eldoLED America
One Lithonia Way
Conyers, GA 30012
USA
[e-mail]
© 2015 eldoLED. All rights reserved. V1.0b
More product documentation and eldoLED's warranty and terms and conditions are available at www.eldoLED.com.