Electrohome EAAC200 User manual

Power Connection
Plug the AC power cord into an AC outlet.
Clock display will ash 12:00 until set to correct
time.
Step 1
Step 2

Battery Backup
This alarm clock is equipped with an option-
al battery backup feature. This will restore
your alarm clock settings in teh event of a
power outage.
Installing the batteries (not included):
Open the battery compartment on the bottom
of the alarm clock by pushing on the latch and
puling the door open.
Install 2 * AA batteries ensuring that the bat-
tery polarity corresponds to the polarity in the
battery compartment.
Close the battery compartment cover.
Step 1
Step 2
Step 3
Note:
Batteries must be installed by an adult.
Use only the recommendced size and type of battery specied.
Plsease be sure to follow the correct polarity when installing the battery in the battery
compartment. Reversed battery may cause damage to the alarm clock.
DO NOT mix dierent types of batteries or mix new and used batteries.
When not using the unit for a prolonged period of time, please remove the batteries to
avoid possible damage caused by leaking batteries.

Clock Top-view
Set the Time
Press and hold the SET button, the time will
start to ash.
Press the HR button to increase the HOUR.
Press the MIN button to increase the MINUTES.
Once time is set correctly, press teh SET button.
Step 1
Step 2
Step 3
Step 4

Clock Top-view
Play the Radio
Press the button once to turn radio ON
Press and hold the AM/FM button to toggle
between AM and FM radio.
Press the button to decrease and the
button to increase teh volume.
Press the button to decrease and the
button to increase the AM/FM frequency.
Press the button once to turn radio OFF.
Step 1
Step 2
Step 3
Step 4
Step 5

Clock Top-view
To Set / Recall the Radio Presets
You can preset and store the frequency of 20 radio stations in
the memory; 10 AM stations and 10 FM stations.
Press the button once to turn radio ON
Press and hold the AM/FM button to toggle
between AM and FM radio.
Set radio to desired station.
Press and hold the SET button tand P01 will
ash on the screen. ( Use the and but-
tons to select another preset [P01-P10])
Press the SET button to conrm setting to P01
or wait 5 seconds for ashing to stop.
Repeat the steps above to preset more radio
stations.
To recall a preset station, press the SET button
to toggle through the current preset radio sta-
tions.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7

Clock Top-view
Clock Front-view
Clock Top-view
Setting the Alarm
You can set two dierent alarms on this clock
Choose which alarm you would
like to set
On the top of the clock,
Alarm 1 or Alarm 2
press and hold this
button to set alarm 1
press and hold this
button to set alarm 2
until screen begins
to blink
Step 1

Clock Top-view
press this button to
increase the hour
press this button to
increase the minute
Step 2 Set the alarm time
Step 3 Set alarm sound
Once the screen is blinking,
You can choose whether you would like to be woken
up by a buzzer or by the radio
radio
buzzer
radio
buzzer
alarm 1 alarm 2

press this button to
set sound for alarm 1
press this button to
set sound for alarm 2
Clock Top-view
To set the alarm sound,
A green light will appear on the screen next to the sound icon
meaning you have selected that option.
Continue pressing the button until you have selected the alarm
sound you want. If a green light does not appear on the screen,
the alarm is OFF.

radio
buzzer
radio
buzzer
radio
buzzer
buzzer alarm sound is
selected
radio alarm sound is
selected
alarm is o