Electrolux WAC060K7A User manual

RRoooommAAiirrCCoonnddiittiioonneerr
IInnssttaallllaattiioonnaannddOOppeerraattiioonnMMaannuuaall
Record the Model No. and Serial No. of this appliance in the space provided below. The serial plate is located behind the
front louvers, or (on some models) on the outside of the cabinet.
Model No. ___________________________________________
Serial No. ____________________________________________
Keep these numbers for future reference.
IIMMPPOORRTTAANNTT::Keep a copy of your bill of sale. The date on the bill establishes the warranty period should service be required.
If service is performed, it is in your best interest to obtain and keep all receipts.
CCoonntteennttss
2 How and Why
2 Important Safety Instructions
2 Energy Saving Ideas
3 Installation
4 Using the Air Conditioner
5-6 Air Conditioner Features
7 Care and Cleaning
8 Before You Call for Service
Please contact your dealer/distributor for any questions or problems you may have pertaining to your new air conditioner.
309000841 (0104)
UNIT MODEL/ POWER SUPPLY VOLTAGE VARIATION AMBIENT AIR ON CONDENSER
(VOLTS)
MIN. MAX. MIN. °F (°C) MAX. °F (°C)
WAC060K7A 127-1-60 114.3 139.7 70(20.1) 115(46.1)
WAC061L7A 127-1-60 114.3 139.7 70(20.1) 115(46.1)
WAL100K1A 127-1-60 114.3 139.7 70(20.1) 115(46.1)
WAL126K2A 220-1-60 198 242 70(20.1) 115(46.1)
WAS180K2A 220-1-60 198 242 70(20.1) 115(46.1)
WAS250K2A 220-1-60 198 242 70(20.1) 115(46.1)

2
Your room air conditioner provides the following functions to make hot weather
living more comfortable:
• Cools and circulates room air.
• Lowers humidity by removing excess moisture.
• Filters out summertime dust, dirt, and some airborne impurities.
The air conditioner performs these functions by drawing room air through a filter
which traps dust and dirt particles. The air then passes over a cooling coil which
refrigerates the air and removes excess moisture. The same air is then returned to
the room — cooler, drier and cleaner. Moisture removed from the room air is carried
to the outside and evaporated.
Your air conditioner is designed to be easy to operate and to provide plenty of
cooling power.
HHoowwaannddWWhhyy
RReeaaddaalllliinnssttrruuccttiioonnssbbeeffoorreeuussiinnggtthhiissaaiirrccoonnddiittiioonneerr..
FFoorrYYoouurrSSaaffeettyy
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. Read product labels for flammability and other warnings.
PPrreevveennttAAcccciiddeennttss
To reduce risk of fire, electrical shock, or injury to persons when using your air
conditioner, follow basic precautions, including the following:
• Be sure electrical service is adequate for model you have chosen. This information
can be found on the serial plate, which is located either behind louvers or on left
side of cabinet.
• If air conditioner is to be installed in window, you will probably want to clean
both sides of glass first. If window is a triple-track type with screen panel
included, remove screen completely before installation.
• Be sure air conditioner has been securely and correctly installed according to the
separate installation instructions provided with this manual. Save this manual and
installation instructions for possible future use in removing or reinstalling this unit.
• When handling the air conditioner, be careful to avoid cuts from sharp metal fins
on front and rear coils.
EElleeccttrriiccaallIInnffoorrmmaattiioonn
The complete electrical rating of your new room air conditioner is stated on the
serial plate. Refer to the rating when checking the electrical requirements.
• Be sure air conditioner is properly grounded. To minimize shock and fire hazards,
proper grounding is important. The power cord is equipped with a three-prong
grounding plug for protection against shock hazards.
• Your air conditioner mmuussttbe used in a properly grounded wall receptacle. If wall
receptacle you intend to use is not adequately grounded or protected by a time
delay fuse or circuit breaker, have a qualified electrician install proper receptacle.
• Do not run air conditioner with outside protective cover in plate. This could result
in mechanical damage within the air conditioner.
•DDoonnoottuusseeaanneexxtteennssiioonnccoorrddoorraannaaddaapptteerrpplluugg..
•IInnccaasseeooffddaammaaggeettooppoowweerrccoorrdd,,iittsshhoouullddbbeerreeppllaacceeddbbyyaannaauutthhoorriizzeedd
tteecchhnniicciiaann..
IImmppoorrttaannttSSaaffeettyy
IInnssttrruuccttiioonnss
•DDoonnoottbblloocckkaaiirrfflloowwiinnssiiddeewwiitthhbblliinnddss,,ccuurrttaaiinnssoorrffuurrnniittuurree;;oorroouuttssiiddee
wwiitthhsshhrruubbss,,eenncclloossuurreess,,oorrootthheerrbbuuiillddiinnggss..
• Room air conditioner capacity must fit room size for efficient operation.
• Install room air conditioner on shady side of home. A window that faces north is
best because it is shaded most of the day.
• Close fireplace damper, floor and wall registers so cool air does not escape.
• Keep blinds and drapes in other windows closed during sunniest part of day.
• Clean air filter as recommended in section “Care and Cleaning.”
• Proper home insulation and weather stripping keeps warm air out and cool air in.
• Operate heat producing appliances such as ranges, washers, dryers and
dishwashers during coolest part of the day.
EEnneerrggyySSaavviinnggIIddeeaass
TTeecchhnniiccaallSSppeecciiffiiccaattiioonnss
•IInnddoooorrFFaannSSppeeeeddss3
•EElleeccttrriiccaallSSuuppppllyyV/Ph/Hz
127/1/60
220-240/1/60
•FFuusseeRRaattiinngg(MAX.) 15 Amp
(Over 18,000 Max is 20Amp)
AAccttuuaallccoooolliinnggccaappaacciittyymmiigghhtt
vvaarryyaaccccoorrddiinnggttoollooccaall
eennvviirroonnmmeennttaallccoonnddiittiioonnss..
OOppttiioonnaallooppeerraattiinnggtteemmppeerraattuurreess::
•IInnddoooorr65° to 104°
•OOuuttddoooorr70° to 104°
This Use and Care Manual provides
specific operating instructions for your
model. Use the air conditioner only as
instructed in this manual. These instruc-
tions are not meant to cover every
possible condition and situation that may
occur. Common sense and caution must
be practiced when installing, operating,
and maintaining any appliance.

3
Warranty will be voided if installation instructions are not followed.
Read entire “Installation” section before beginning installation.
IInnssttaallllaattiioonn
BBeessuurreeuunniittiisslleevveellffrroommssiiddee--ttoo--ssiiddeeffoorrpprrooppeerrwwaatteerrddrraaiinnaaggee..TThhiissmmaayybbeeaacchhiieevveeddbbyyuussiinnggsshhiimmss..
UUnniittmmuussttssllooppeeddoowwnnwwaarrddffrroommffrroonnttttoorreeaarr..MMooddeellssuuppttoo2244””ddeeeepp::xx==11//44iinncchh((66..44mmmm))
MMooddeellssoovveerr2244””ddeeeepp::xx==33//88iinncchh((11..00ccmm))
SSiiddeelloouuvveerrssmmuussttnnoottbbeeoobbssttrruucctteedd..AAiirrmmuussttbbeeaabblleettooeenntteerrssiiddeelloouuvveerrss..
FFoorrSSiiddeebbyySSiiddeeIInnssttaallllaattiioonnsspprroovviiddeeaaddeeqquuaatteecclleeaarraannccee((22ffeeeett,,6611..00ccmm))bbeettwweeeennuunniittss..

4
FFrroonnttIInnssttaallllaattiioonnSome models are shipped in a removable sleeve, please read the Instructions below
before installing the Decorative front and accessories.
IInnssttaalllliinnggtthheeVVeennttCCoonnttrrooll((oonnssoommeemmooddeellss))
The vent control handle is included in the decorative front kit (Fig. 3). The handle
must be installed before the decorative front is attached. See illustration below.
1. Insert the handle with the “etchings (Vent/Air)” facing to the left.
2. Slip the black door extension into the split at the end of the handle.
3. For ease of assembly, push the handle in while pressing the door extension
against the foam until the two pieces lock together.
4. Move handle in and out to be sure vent is operating properly.
IInnssttaalllliinnggDDiiaallPPllaatteeaannddFFrroonnttFFrraammee
Some models require installation of the dial plate and the front panel of the air
conditioner included in a decorative kit. To assemble, follow these steps.
• Remove control knobs from front kit (some models).
• Carefully remove protective film
from the front of the dial plate
(some models).
• Line up holes on dial plate with the correct control stems and push dial plate to
control panel surface.
• While holding dial plate in place
install control knobs on protruding stems (Fig. 1).
SSTTEEPP11::IINNSSTTAALLLLIINNGGDDIIAALLPPLLAATTEEAANNDDCCOONNTTRROOLLKKNNOOBBSS::
SSTTEEPP22::IINNSSTTAALLLLDDEECCOORRAATTIIVVEE
FFRROONNTTTTOOCCAABBIINNEETT::
DDeeccoorraattiivveeFFrroonntt
• On some models, before installing
the front frame, remove the tilt panel.
Grasp the panel on both sides and
gently pull to release.
• Position the top of the decorative front
over the top flange of the case, and align the tabs with the slots in the case (Fig. 2).
• As you install the front frame to the unit be sure the vent handle is positioned through the front in the proper location.
• Carefully pull down on the front to engage the top tabs, while pushing the front over the case to ensure proper alignment.
• The side tabs will “click” when front is seated.
• Install front retaining screw(s) behind the filter handle or filter & panel (Figs. 3 & 4).
• On some models, then add filter & panel.
FIG. 1 FIG. 2
FIG. 3 FIG. 4
Screws
Screws

5
To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
TToobbeeggiinnooppeerraattiinnggtthheeaaiirrccoonnddiittiioonneerr,,ffoolllloowwtthheesseesstteeppss::
1. Plug in air conditioning unit. (To prevent electrical hazards, do not use extension
cord or adapter plug.)
2. Set exhaust vent to CLOSED position.
3. Set thermostat at highest number (coldest, or cooler setting).
4. Set Selector Control at highest cooling level (see below).
5. Adjust louvers for comfortable air flow.
6. Once room has cooled, adjust thermostat to setting you find most comfortable.
Review the “Air Conditioner Features” section for other settings.
UUssiinnggtthheeAAiirr
CCoonnddiittiioonneerr
The controls featured in this manual are representational of the many models
available. Your model may offer slightly different features.
SSeelleeccttoorrCCoonnttrrooll//CCoooolliinnggUUnniittss
The Selector Control turns unit on or off and allows a choice of either cooling room
air (COOL) or circulating room air at the existing temperature (FAN). The HI, LOW,
and on some models, MED settings determine the speed of air circulation.
FFAANN— selection provides various levels of air circulation without cooling.
HHIIGGHHCCOOOOLL— provides maximum cooling and is recommended for cooling the
room quickly.
MMEEDDCCOOOOLL— (some models) — fan runs slower, for moderate cooling needs.
LLOOWWCCOOOOLL— fan runs slowly to maintain a comfortable cooling level.
FFaannOOnnllyyOOppeerraattiioonn((VVeennttiillaattiinngg))
Turn the selector-switch knob to one of the following positions:
HHIIGGHHFFAANN— Maximum air circulation without cooling.
MMEEDDFFAANN— Moderate air circulation without cooling.
LLOOWWFFAANN— Slow air circulation without cooling.
SSeelleeccttiinnggtthheeTTeemmppeerraattuurree
The desired temperature is selected by turning the temperature control
knob.
If temperature in room is higher than desired, turn knob clockwise to a new
position. If the temperature is lower than desired, turn knob counterclockwise to a
new position.
AAiirrCCoonnddiittiioonneerr
FFeeaattuurreess
NNOOTTEE::If air conditioner is turned off,
wait 3 minutes before restarting. This
allows pressure inside compressor to
equalize. Failure to follow these
instructions may cause inefficient
operation.
SELECTOR SWITCH

6
AAiirrCCoonnddiittiioonneerrFFeeaattuurreess
((ccoonnttiinnuueedd))
AAuuttoommaattiiccTThheerrmmoossttaatt((ssoommeemmooddeellss))
When a COOL or HEAT (some models) setting is selected, the thermostat controls
the amount of cooling or heating by automatically turning the cooling compressor
or heater on and off in response to the room temperature.
Set the thermostat at the highest number for the coldest setting for cooling, and
the lowest number for warmer settings in the HEAT mode. Once the room has
reached the desired temperature, adjust the thermostat to a number providing the
most comfortable amount of cooling or heating. Higher numbers provide lower
room temperatures. Lower numbers provide warmer room temperatures.
NNiigghhttTTiimmeeCCoooolliinngg
When outside temperatures drop below 70°F (21°C) and the unit is cooling, frost
may form on the coils and block airflow into the room. If this occurs, operate the
air conditioner on the FAN setting (or CONSTANT FAN/HIGH on Energy Saver
models) to defrost the coil.
If cooling while the outside temperature is low, set the thermostat to the middle
position. Make sure the louvers are open. This will help prevent frost build-up.
FFrreesshhAAiirrVVeennttCCoonnttrrooll
The Fresh Air Vent allows the air conditioner to recirculate inside air (OFF), draw
air into the room (FRESH AIR) or exhaust stale air to the outside (VENT). See Figures
1, 2 & 3 for this operation.
• The “OFF” position is used when MMAAXXIIMMUUMMcooling is desired. It may also be
for room air re-circulation without cooling when the selector switch is set to the
FAN position, this will also filter the room air.
• The FRESH AIR position allows outside air to be drawn into the room to refresh
the inside room air.
• The VENT position removes stale air from the room and exhausts it to the
outside.
• Any vent position can be used with any fan selection.
Figure 1 (OFF)
Figure 2 (FRESH AIR)
Figure 3 (VENT)
AUTOMATIC THERMOSTAT

7
CCaarreeaannddCClleeaanniinnggClean your air conditioner occasionally to keep it looking new. BBeessuurreettoouunnpplluugg
tthheeuunniittbbeeffoorreecclleeaanniinnggttoopprreevveennttsshhoocckkoorrffiirreehhaazzaarrddss..
AAiirrFFiilltteerrCClleeaanniinngg
The air filter should be checked at least once a month to see if cleaning is necessary.
Trapped particles in the filter can build up and cause an accumulation of frost on
the cooling coils.
• Push the vent handle to the OFF position.
• Tilt the Horizontal Louvers in the UP position, before pulling the filter out.
• Grasp the filter by the center and pull up and out.
• On some models, first tilt the panel out by grasping the panel from both sides
just below the air directional louvers and gently pull to release. Gently pivot the
panel on its hinge, and remove the filter.
• Wash the filter using liquid dishwashing detergent and warm water. Rinse filter
thoroughly. Gently shake excess water from the filter. Be sure filter is thoroughly
dry before replacing.
• Or, instead of washing you may vacuum the filter clean.
CCaabbiinneettCClleeaanniinngg
• Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet and
front may be dusted with an oil-free cloth or washed with a cloth dampened in a
solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and
wipe dry.
• Never use harsh cleaners, wax or polish on the cabinet front.
• Be sure to wring excess water from the cloth before wiping around the controls.
Excess water in or around the controls may cause damage to the air conditioner.
• The cabinet front can be removed for more thorough cleaning. Refer to “Front
Installation” in this manual.
• Clean the front in a sink using liquid dishwashing detergent and warm water. Rinse
thoroughly and dry.
• Replace cabinet front. Replace the screws.
• Replace front panel (if applicable) and filter. Plug in air conditioner.
WWiinntteerrSSttoorraaggee
If you plan to store the air conditioner during the winter, remove it carefully from the
window according to the installation instructions. Cover it with plastic or return it to the
original carton.
NNOOTTEE::TToopprreevveennttrruussttoorreelleeccttrriiccaallccoonnnneeccttiioonnssffrroommbbeeiinnggddaammaaggeedd,,ssttoorreeaaiirr
ccoonnddiittiioonneerriinnaannuupprriigghhttppoossiittiioonnaannddaaddrryyppllaaccee..
AAiirrCCoonnddiittiioonneerrFFeeaattuurreess
((ccoonnttiinnuueedd))
AAiirrDDiirreeccttiioonnaallLLoouuvveerrss
Air directional louvers control air flow direction. Your air conditioner has one of the
louver types described below.
44--WWaayyLLoouuvveerrss
The 4-Way air directional louvers allow you to direct air flow up or down, left or
right throughout the room as needed. To adjust the air directional louvers side-to-
side, use the center handle as you move it side-to-side.
(4-WAY)

8
AAvvooiiddSSeerrvviicceeCChheecckklliisstt
OOCCCCUURRRREENNCCEESSOOLLUUTTIIOONN
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workman-
ship or materials in this appliance.
AAiirrccoonnddiittiioonneerrwwiillllnnoottooppeerraattee..Wall plug disconnected. Push plug firmly into wall outlet.
House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit
breaker.
Selector Control in OFF position. Turn selector to ON (some models) or the desired FAN or COOL
setting.
Unit turned off by moving thermostat to a higher number and then immediately turning back to
a colder number. Wait approximately 3 minutes. Listen for compressor to start.
Unit turned off and then on too quickly. Turn unit off and wait 3 minutes before restarting.
Thermostat set too low. Adjust thermostat to higher number for cooling.
AAiirrffrroommuunniittddooeessnnoottffeeeellccoolldd
eennoouugghh..Turn selector to a higher FAN or COOL position
Thermostat set too warm. Set thermostat to colder temperature.
Room temperature below 70°F (21°C). Cooling may not occur until room temperature rises above
70°F (21°C).
Temperature sensing tube touching cold coil, located behind air filter. Straighten tube away from coil.
AAiirrccoonnddiittiioonneerrccoooolliinngg,,bbuuttrroooommiiss
ttoooowwaarrmm——iicceeffoorrmmiinnggoonnccoooolliinngg
ccooiillbbeehhiinnddddeeccoorraattiivveeffrroonntt..
Outdoor temperature below 70°F (21°C). To defrost the coil, set selector to FAN position. Then,
set thermostat to warmer position.
Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set selector to
FAN.
Thermostat set too cold for night-time cooling. To defrost the coil, set selector to a FAN position.
Then, set thermostat to a warmer position.
AAiirrccoonnddiittiioonneerrccoooolliinngg,,bbuuttrroooommiiss
ttoooowwaarrmm——NNOOiicceeffoorrmmiinnggoonn
ccoooolliinnggccooiillbbeehhiinnddddeeccoorraattiivveeffrroonntt..
Dirty air filter — air restricted. Clean air filter. Refer to Care and Cleaning section.
Thermostat set too warm. Turn thermostat clockwise to a colder setting.
Thermostat set on low number. Turn thermostat to higher number.
Vent set at OPEN position. Set vent at CLOSED position for maximum cooling.
Air directional louvres positioned improperly. Position louvres for better air distribution.
Front of unit is blocked by drapes, blinds, furniture, etc. — restricts air distribution. Clear blockage
in front of unit.
Doors, windows, registers, etc. open — cold air escapes. Close doors, windows, registers, etc.
Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls,
ceiling, floor and furniture.
AAiirrccoonnddiittiioonneerrttuurrnnssoonnaannddooffff
rraappiiddllyy..Dirty air filter — air restricted. Clean air filter.
Outside temperature extremely hot. Set FAN on high speed to bring air past cooling coils more
frequently.
WWaatteerrddrriippppiinnggIINNSSIIDDEEwwhheennuunniittiiss
ccoooolliinngg..Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to
installation instructions — check with installer.
WWaatteerrddrriippppiinnggOOUUTTSSIIDDEEwwhheennuunniittiiss
ccoooolliinngg..Unit removing large quantity of moisture from humid room. This is normal during excessively
humid days.
NNooiisseewwhheennuunniittiissccoooolliinngg..Air movement sound. This is normal. If too loud, turn selector to lower FAN setting.
Sound of fan hitting water-moisture removal system. This is normal when humidity is high. Close
doors, windows and registers.
Window vibration — poor installation. Refer to installation instructions or check with installer.