Electrolux ESV123C1AA User manual

Operation Notices
Precautions...........................................................................................
Identification of Parts............................................................................
Screen Operation Guide
Display..................................................................................................
Button on remote controller Display.....................................................
Operating Modes..................................................................................
Replacement operation........................................................................
Emergency operation...........................................................................
Maintenance
Additional Filters Installation Guide......................................................
Clean and Maintenance........................................................................
Malfunction
Troubleshooting.....................................................................................
Installation Notice
Installation dimension diagram..............................................................
Safety precautions for installing and relocating the unit........................
Tools for installation...............................................................................
Selection of installation location............................................................
Requirements for electric connection...................................................
Installation
Installation of indoor unit.......................................................................
Installation of outdoor unit.....................................................................
Vacuum pumping..................................................................................
Leakage detection.................................................................................
Check after installation..........................................................................
Test and operation
Test operation.......................................................................................
DC Inverter testing procedure
DC Inverter testing procedure...............................................................
Attachment
Configuration of connection pipe...........................................................
Safety operation of flammable refrigerant.............................................
Pipe expanding method........................................................................
IDU Wiring Diagram..............................................................................
ODU Wiring Diagram............................................................................
1
6
7
8
9
10
11
12
13-14
15-17
18
19
20
20
21
22-26
27-29
30
30
31
31
32
33-34
35-36
37
38
39

Explanation of Symbols

The Refrigerant
Read the user manual instructions carefully before Usage,
Installation and serviceability of the appliances.
manufacturer.

Precautions
1

Precautions
2

Precautions
3
circuit breaker.

Precautions
4
class 1
Extending wire is
forbidden.
The grounding resistance should be less than 0.1 ohm.

Precautions
5

6
CLOCK PLASMA
TIMER ON/OFF
FAN/TURBO
E.SAVER
H.SWING
CONVERTIBLE
V.SWING
Identification of Parts
Indoor Electrical Box

Display
Plasma Indicator
7

Buttons on remote controller
CLOCK PLASMA
TIMER ON/OFF
FAN/TURBO
E.SAVER
H.SWING
CONVERTIBLE
V.SWING
1. MODE BUTTON
Press this button to select the operation mode.
2. ON/OFF BUTTON
The appliance will be started when it is energized
or will be stopped when it is in operation, if you
press this button.
3. CONVERTIBLE BUTTON
Pres this button to turn on convertible mode C1,
C2, C3 and C4.
4. V. SWING BUTTON
Used to stop or start vertical adjustment louver
swinging and set the desired up/down airflow
direction.
5/10. SET TEMPERATURE SETTING BUTTONS
Used to set temperature and timer.
6. H. SWING BUTTON*
Used to stop or start horizontal adjustment louver
swinging and set the desired left/right airflow
Direction.
7. E. SAVER
o
Used in cooling mode bye setting Temp to 24 C
keeping the fan speed medium.
8. SLEEP BUTTON
Used to set or cancel sleep mode operation.
9. TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
11. FAN/TURBO BUTTON
Used to select fan speed in sequence low,
medium, high & auto.
12. DISPLAY BUTTON
This key is used to activate/deactivate light
feature.
13. CLOCK BUTTON
Used to set the current time.
14. PLASMA BUTTON
Used to ON or OFF Plasma
1
4
7
9
12
13
5/10
2
3
6
8
11
14
8
* Horizontal swing feature is not available on some models.

Operating modes
9
1.
2.
3.
Press 'Mode' button to cyclically step through the AUTO Cool Dry Fan modes and stop when
Auto mode is selected.
Auto will appear on the remote display when you select the AUTO mode.
The air conditioner will automatically select cooling, or fan only operation depending on set
temperature and the room temperature.
By Pressing the Convertible key, AC comes to desirable tonnage requirement thus saving energy.
It only works in Cool Mode.
CONVERTIBLE OPERATION :-
1.
2.
CONVERTIBLE
C1
C2
C3
C4
TONNAGE
0.7T
0.8T
0.9T
1.2T
FOR 1T INV MODELS
CONVERTIBLE
C1
C2
C3
C4
TONNAGE
0.9T
1.1T
1.3T
1.6T
FOR 1.5T INV MODELS
CONVERTIBLE
C1
C2
C3
C4
TONNAGE
1.2T
1.4T
1.6T
1.9T
FOR 2T INV MODELS
The tonnage data in above table is approximate value.
3.

Operation guide
CLOCK PLASMA
TIMER ON/OFF
FAN/TURBO
E.SAVER
H.SWING
CONVERTIBLE
V.SWING
10

Emergency operation
11
Clean and maintenance

Additional Filters Installation Guide
12
Additional filters Installation
Fix additional filter on evaporator coil at
the place as shown in below picture.
Filter casing locks should be pressed on
evaporator coil in sequence as shown below
lock 1 lock 2 lock 3
• Additional filter qty may vary refer as received in machine.
(applicable for some models)
Caution- Do not press all locks at the same time.
Lock 1
Lock 2
Lock 3
Note: It is advisable to replace the filter at interval of 1 Year for PM2.5 filter and 2 years for Anti-bacterial filter.

Clean and Maintenance
13

Clean and Maintenance
14

Troubleshooting
15