Electrolux ECCG3668AS User manual

A Quick Guide to Getting Started
A20415701
(Oct 2020)
Before you begin
1. Remove all packaging material and tape.
2. Make sure your burner caps are centered on
the burners and installed correctly.
3. Place the center cooktop grate first, then
position the left and right grates in place.
Refer to your Use & Care Manual for detailed
instructions.
OPERATING THE BURNERS
1. Place your cookware on the burner.
2. Push in and turn the cooktop knob to the
position to light the burner.
3. Check the burner to make sure it has a steady
flame.
4. Once the burner is lit, turn the knob to adjust
the flame size.
NOTE: A clicking sound will occur on all the burners
when a control knob is pushed in.
BURNER KNOB POSITIONS
Start Cooking
FLAME SIZE COOKING TYPE
High Flame Boiling, Broiling, Searing
Medium Flame Slow Boiling, Sauce and Gravy
Thickening, Steaming, Sautéing
Low Flame Simmering, Poaching, Stewing
These settings are based on medium-weight metal or aluminum
pans with lids. Settings may vary when using other types of pans.
SETTING YOUR FLAME SIZE
The color of the flame is the key to proper burner
adjustment.
A good flame is clear, blue and hardly visible. Adjust
or clean the burner if flame is yellow-orange.
If the flame extends beyond the outer edge of your
cookware, reduce the flame setting.
Start on the highest setting and lower the setting as
needed for general cooking needs.
position
LITE position
HI to LO
Burner cap
Burner
head
Orifice
holder
Orifice
holder
Ignitor
Ignitor
Burner Cap Installation
All burner caps must be properly installed before first use to ensure proper ignition and gas flame size.
1. Check to see if the size of
each burner cap matches
the size of the burner
head.
2. Make sure that the burner
caps are correctly in
place on the burner
heads.
The burner cap should fit
snugly into the center of
burner head and be level.
3. Once in place, check the fit by
gently sliding the burner cap
from side to side.
NOTE: We recommend contacting a professional installer or technician if you need to convert your cooktop to
liquefied petroleum (LP) from natural gas.

FAQs
• Why is my gas cooktop not working?
Make sure your cooktop knob is turned to LITE when turning on the surface burner. Check to make sure your
cooktop burner ports aren't clogged. Your Use & Care Manual has instructions on how to properly clean your
cooktop burners.
• Why is the burner flame uneven?
Clogged burner ports or slots can cause uneven flames. Check to make sure the cooktop burners are
installed and placed correctly. Burner caps should be level and seated correctly on the burner heads.
• Why is my burner flame too high?
The cooking setting may be too high. Use your cooktop knob to reduce to a lower setting.
Burner caps not placed properly can cause the flame to be too high. Check the fit of the burner caps by
sliding it side to slide when the cooktop is cool.
An incorrect LP conversion of your cooktop can also cause the flame to be too high. Refer to the conversion
kit instructions that came in your literature pack.
Sustainability,
together
ElectroluxAppliances.com
[phone]
10200 David Taylor Drive
Charlotte, NC 28262
ElectroluxAppliances.ca
[phone]
5855 Terry Fox Way
Mississauga, ON L5V 3E4
We're committed to more
sustainable eating from how
we store foods to how we
prepare them.
Always refer to your Use & Care Manual for more tips and instructions.
Peace of Mind & Protection
Discover more benefits by registering your appliance. Text the
photo icon on your appliance or registration card, or visit us
online to register.
2208-CR8JCQ7HPS
PHOTOREGISTERSM
Protect your cooktop by quickly cleaning up spills when they happen.
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop burners are cool.
For general cleaning, wipe with a clean, damp cloth and wipe dry to avoid scratches. For instructions on how to
clean your cooktop grates and burners, refer to your Use & Care Manual.
Care and Cleaning
Using the Griddle
Your cooktop has two standard sized burners on the left side
that can be used to heat larger cookware like the griddle.
1. Center the griddle over the left side gas burners.
2. Preheat the griddle for 5 minutes on medium to
medium-low setting.
The reversible griddle is ceramic-coated cast iron. Use
non-stick cooking spray or oil as needed. Slowly preheating the
griddle ensures even heat distribution for best cooking results.
We recommend hand washing the griddle with a stiff brush and very hot water. Use a little soap if needed, and
rinse well. Dry with a lint-free cloth and store in a dry place. The griddle is dishwasher-safe.