
10www.electrolux.com
17 HOW TO USE THEMEAT GRINDER*
• Insert the grinder screw (B) into the grinder housing (A).
GROUND MEAT: Place the grinderknife (C) over the squareshaft at the end of the grinder screw
(B). Place the desired grinder plate (D) over the knife (C).
Tighten the grinder ring (E) by hand until the meatgrinder issecured.
WARNING! Do not over tighten the ring.
• Push the attachmenthub release button (2) to the right andremove the attachmenthubcover (13).
Fit the assembledmeat grinder in the front attachment hub (3) using the attachmenthubrelease
button (2).
The attachmenthubrelease button (2) will clickinto position once the meatgrinder issecurely
attached.
WARNING! Before putting attachments turn off the appliance and unplug it.
•Place a mixingbowl (7) or othercontainer under the attachment to collect the result.
•Place the grinder tray (H) over the grinder housing (A).
• Dice raw meat into small pieces (around 2.5cm) and place it on the food tray.
Plug in the appliance and turn the speed selector to recommended speed.
• Feed the meat into the feed chute byusing the pusher (I).
WARNING! Donotput your fingers or otherutensilsin the feed chute.
Notes: Suggest to run the machine for another 1 min after the last meat was put, to have less remaining
ground meat in the machine.
18 HOW TO USE THE SALAD MAKER*
• Choose your slicer/shredder(K) andinsert itinto thesalad maker housing (J) by turning itclockwise.
Makesure the attachmentis fullyinserted.
WARNING! The blades and inserts are verysharp!
• Push the attachmenthub release button (2) to the right andremove the attachmenthubcover.
Fit the assembledsalad maker in the front attachmenthub (3) using the attachmenthubrelease
button (2).
The attachmenthubrelease button (2) will clickinto position once the saladmaker issecurely
attached.
•Place a mixingbowl (7) or othercontainer under the attachment to collect the result.
• Cut the food into a size that fits the feed chute. Plug in the appliance and turn the speed selector to
desired speed.
• Feed the food into the feedchute by using the pusher(L).
WARNING! Do notput your fingers or otherutensilsin the feed chute.
19 When finished using your attachment, turn off the appliance and unplug it. Place back the front
attachmenthub cover (13) using the attachmenthubrelease button (2).
CLEANING AND CARE
Always unplug the appliance before cleaning
1Motor Housing. Neverimmerse thehousing with motor in water! Clean the motor housing only with a
dampcloth. Donotuse abrasive cleaners, scouring pads or abrasive detergents while cleaning the
appliance.
2Mixing Bowl, Mixing Tools ( dough hook, whisk, beater), and splash guard are dishwashersafe. If
washing by hand, don’tuse wire brush, steel wool or bleach to avoidrust.
3Meat grinder* andsalad maker* attachmentsshould onlybe washedbyhandin warm soapy water.
*Available in certain models only. Also Available for sale on brand website.
CNT
TH
EN