Electrolux 5995421657 User manual

5995421657
Dishwasher
Use & Care GuideUse & Care Guide
Use & Care GuideUse & Care Guide
Use & Care Guide
Wine Cooler
Guide d'utilisation et d'entretienGuide d'utilisation et d'entretien
Guide d'utilisation et d'entretienGuide d'utilisation et d'entretien
Guide d'utilisation et d'entretien
Refroidisseur à vin

2Finding Information
PLEASE READ AND SAVE THIS GUIDE
Thank you for choosing Electrolux, the new premium brand in home appliances.
This
Use & Care Guide is part of our commitment to customer satisfaction and
product quality throughout the service life of your new wine cooler.
We view your purchase as the beginning of a relationship. To ensure our ability to
continue serving you, please use this page to record key product information.
Once you have your unit installed, we suggest you keep this manual in a safe
place for future reference. Should any problems occur, refer to the
Troubleshooting section of this manual. This information will help you quickly
identify a problem and get it remedied. In the event you require assistance, please
contact the dealer where you purchased your unit.
MAKE A RECORD FOR QUICK REFERENCE
Whenever you call to request information or service, you will need to know your
model number and serial number. You can find this information on the serial plate
located on the inside wall of your unit and on the product registration card.
©2004 Electrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA
All rights reserved. Printed in the USA
Attach your sales
receipt to this
page for future
reference.
IMPORIMPOR
IMPORIMPOR
IMPORTT
TT
TANTANT
ANTANT
ANT
PLEASE READ all instructions completely before attempting to install or operate the
unit.
All wine coolers require a connection to an electrical power source. Improper hook-up
can result in a safety hazard and potential damage to the product or contents! Proper
installation, in accordance with the manufacturer's specifications and all local codes, is
the sole responsibility of the consumer. The manufacturer is not responsible for any
installation expenses or damages incurred due to improper installation. If you are
unsure of your ability to safely connect electric power to the unit, consult a licensed
and insured professional to perform all electrical work.

3
Finding Information
NONO
NONO
NOTETE
TETE
TE
Registering your product with Electrolux enhances our ability to serve you. You can
register online (at the Internet address below) or by dropping your Product Registration
Card in the mail. Complete and mail the Product Registration Card as soon as possible
to validate the registration date.
PRODUCT REGISTRATION CARD
The package containing this manual also includes your product registration
information. Warranty coverage begins at the time your Electrolux wine cooler was
purchased.
Please record the purchase date of your Electrolux unit and your dealer’s name,
address and telephone number.
________________________________________________
Purchase Date
________________________________________________
Electrolux Model Number
________________________________________________
Electrolux Serial Number
________________________________________________
Dealer Name
________________________________________________
Dealer Address
________________________________________________
Dealer Telephone
Keep this manual and the sales receipt together in a safe place for further
reference.
QUESTIONS?
For toll-free telephone support in the U.S. and Canada:
1-877- 4ELECTROLUX (1-877-435-3287)
For online support and Internet product information:
www.electroluxusa.com

4
TABLE OF CONTENTS
Finding Information ........................................... 2
Please Read And Save This Guide ................... 2
Make ARecord For Quick Reference ................ 2
Questions? ........................................................ 3
Table Of Contents .............................................. 4
Safety ................................................................... 5
Important Safety Instructions .............................. 5
Installation .......................................................... 7
Site Preparation .................................................. 7
Wood Trim ........................................................... 9
Leveling .............................................................. 11
Door Reversal.................................................... 12
Door Adjustment ............................................... 14
Built-in Installation .......................................... 16
Operation ........................................................... 17
The Right Temperature for Wine ...................... 17
Proper Storage ............................................... 17
Control Settings ............................................... 17
Light Switch and Bulb ...................................... 17
Finding Information
Start-up ............................................................. 18
Temperature Control ......................................... 18
Storage .............................................................. 20
Display Rack ................................................... 20
Stocking Recommendations ............................. 20
Maintenance ...................................................... 21
Maintaining Your Wine Cooler ......................... 21
Exterior Cleaning ............................................ 21
Stainless Steel ................................................. 21
Interior Cleaning .............................................. 22
Condenser Cleaning ....................................... 22
Wine Rack Removal/Installation ....................... 23
Bulb Replacement ........................................... 23
Troubleshooting ............................................... 24
If Service Is Required ...................................... 24
Warranty Information ....................................... 26

5
Safety
IMPORTANT SAFETY INSTRUCTIONS
Safety Precautions
Do not attempt to install or operate your unit until you have read the safety
precautions in this manual. Safety items throughout this manual are labeled with a
Danger, Warning or Caution based on the risk type.
Definitions
!
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
IMPORIMPOR
IMPORIMPOR
IMPORTT
TT
TANTANT
ANTANT
ANT
Indicates installation, operation or maintenance information which is important but
not hazard related.
!
DD
DD
DANGERANGER
ANGERANGER
ANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
!
WARNINGWARNING
WARNINGWARNING
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
!
CACA
CACA
CAUTIONUTION
UTIONUTION
UTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.

6Safety
General Precautions
!
DD
DD
DANGERANGER
ANGERANGER
ANGER
RISK OF CHILD ENTRAPMENT. Before you throw away your old appliance, take off the
doors and leave shelves in place so that children may not easily climb inside.
!
WARNINGWARNING
WARNINGWARNING
WARNING
• Never attempt to repair or perform maintenance on the unit until the electricity has
been disconnected.
• Altering, cutting of power cord, removal of power cord, removal of power plug, or
direct wiring can cause serious injury, fire and/or loss of property and/or life and
will void the warranty.
• Do not lift unit by door handle.
!
CACA
CACA
CAUTIONUTION
UTIONUTION
UTION
• Failure to clean the condenser every three months can cause the unit to
malfunction. This could void the warranty.
• Use care when moving the unit. Some edges are sharp and may cause personal
injury. Wear gloves when moving or repositioning the unit.
• Never install the unit behind closed doors. Be sure front grille is free of
obstruction. Obstructing free air flow can cause the unit to malfunction, and may
void the warranty.
• Allow unit temperature to stabilize for 24 hours before use.
!
CACA
CACA
CAUTIONUTION
UTIONUTION
UTION
• Use only genuine Electrolux replacement parts. Imitation parts can damage the unit
and may void the warranty.

7
Installation
INSTALLING THE WINE COOLER
Your Electrolux wine cooler has been designed for either free-standing or built-in
installation(refer to the Built-in Installation section of this manual for instructions).
In either case, the front grille must NOT be obstructed.
SITE PREPERATION
1Position the unit on a flat, level surface, capable of supporting the entire
weight of the unit. Remember the unit will be significantly heavier once it is
fully loaded.
2This unit requires a grounded and polarized 115 VAC, 60Hz, 15A circuit
(normal household current).
3Avoid connecting the unit to a Ground Fault Interruptor (GFI). GFIs are prone
to nuisance tripping which will cause the unit to shut down. GFIs are generally
not used on circuits which power equipment that must run unattended for
long periods of time.
4The unit must be installed according to your local codes and ordinances.
!
DD
DD
DANGERANGER
ANGERANGER
ANGER
ELECTROCUTION HAZARD!
Electrical Grounding Required. This appliance is equipped with a three prong
(grounding) polarized plug for your protection against possible shock hazards.
• NEVER remove the round grounding prong from the plug.
• NEVER use a two-prong grounding adapter.
• NEVER use an extension cord to connect power to the unit.
Where a two-prong wall receptacle is encountered or a longer power cord is required,
contact a qualified electrician to have it replaced in accordance with applicable
electrical codes.

8Site Preparation
5Position the unit to allow free air flow
through the front grille (see Figure 3).
6Wipe out inside of unit with a damp cloth.
7Final finish of the wooden wine rack trim
must be applied at least 24 hours before re-
installing the wooden rack trim into the
cabinet.
8Be sure to install the Anti-Tip brackets.
Follow the instructions provided with the
Anti-Tip bracket kit.
UL124A
DOOR
SWING
CABINET
OR WALL
0"
CLEARANCE
NEEDED
Figure 1
Figure 3
NONO
NONO
NOTETE
TETE
TE
All units require zero clearance when installed flush with a
cabinet or wall (see Figure 1). Electrolux stainless steel
models require a minimum 2-3/4 inch handle clearance
when installed against a wall or cabinet that extends
beyond the front edge of the unit (see Figure 2).
2 - 3/4”
Figure 2
INTAKE EXHAUST

9
Wood Trim
WINE RACKS WITH WOOD TRIM
Your Electrolux wine cooler is equipped with a natural wood trim on the wine racks
for appearance and durability. The wood trim has been coated at the factory with a
clear vinyl sealer, which will adequately protect the wood in normal usage.
You have 3 options regarding the wood trim on the wine racks.
(1) You can leave as is, (2) add a final finish coat or (3) you may stain the wood
trim. The final finish coat was not applied at the factory so that the wood trim could
be stained. YOU CANNOT STAIN THE WOOD TRIM ONCE YOU APPLY THE
FINAL FINISH. Review the following guidelines when staining and or sealing the
wood to ensure proper adhesion and durability of the finish.
To add a final finish coat:
1Remove five racks with wood trim from unit, see RACK REMOVAL/
INSTALLATION.
2Remove screws securing wood trim to racks.
3Lightly scruff sand the molding with 280 grit 3M Tri-M-Ite® sand-paper.
4Remove sanding dust with a clean, dry cloth.
5Apply a thin coat of a clear protective finish; the factory-applied seal is
compatible with virtually all finishes. A low odor, water clean up, quick drying
finish such as Minwax Polycrylic® is recommended. Follow container label
for directions.
6Lightly sand and reapply if desired.
!
CACA
CACA
CAUTIONUTION
UTIONUTION
UTION
To prevent permanent damage to the inner liner of your wine cooler , the wine rack
wood trim MUST be removed from the unit for staining and/or finishing. Allow stain/
finish to dry thoroughly (at least 24 hours per coat) in accordance with the stain/finish
manufacturer’s instructions prior to re-installing the wood trim inside the cabinet of the
wine cooler . Failure to do so may cause the inner liner of the unit to have a permanent
odor, which is not covered by the warranty.

10 Wood Trim
To stain for a different wood color:
1Remove five racks with wood trim from unit, see Rack Removal/
Installation.
2Remove screws securing wood trim to racks.
3Apply Minwax Water-Based Wood Stain® to wood with a synthetic foam
brush. Stain must penetrate approximately 3 minutes. After this period, while
stain is still wet, take a stain dampened rag and remove all excess stain.
Wipe in the direction of the grain with medium pressure to achieve the
desired stain color.
4After 2 hours, repeat step three. This will even out the color of the wood.
5Allow stain to dry for a minimum of 3 hours before finishing.
6If desired sand the wood with very fine sandpaper to smooth the surface from
the staining process.
7Remove all dust from the wood. Apply one coat of Minwax Ultra Fast-Drying
Polycrylic Protective Finish® with a synthetic foam brush to the wood. This
finish should be applied in a thin coat following the direction of the grain. First
apply the finish to the back and sides of the wood. Allow this to dry for two
hours. Next apply the finish to the front side of the wood and allow to dry for
two hours. Sand with very fine sandpaper (220 grit). Reapply in the same
manner 3 times total. After the third coat do not sand the surface.
8Allow the final coat to dry for 24 hours before installing the wood to the wine
cooler racks.