g
37
Operation
You can use the appliance to mix,
knead and whisk food. The mixer and
mixing bowl are each driven separately
by their own motors, and the speeds of
the mixer and mixing bowl can be indi-
vidually adjusted. However the appli-
ance is switched on and off with one
single switch.
3The dough hooks (Figure 1/H) are used
for heavy doughs, such as yeast dough,
short crust pastry, potato batters and
cake mixes.
The whisk (Figure 1/G) is suitable for
light cake mixes, egg white, cream,
mayonnaise, purées and for stirring
sauces and dessert powders.
Preparing for use
Raising the mixer
(Figure 2)
1Ensure that the appliance is switched
off before raising/lowering!
0Press the raise/lower button (Figure
1/D) and swing the mixer up, until it
clicks in place.
3With the mixer raised, the accessories
can be easily changed and the mixing
bowl located on the processor stand or
removed.
Inserting accessories
(Figure 3–4)
1Each ot the two dough hooks resp.
whisks has different plug shapes and
must be pushed into the correct slot. If
only one of the accessories will lock in
place, the accessories are in the wrong
socket.
0Place the oval shaped whisk into the
smaller socket (Figure 3/a). Place the
whisk with the plastic nodules on the
base into the larger socket (Figure 3/b).
0Place the dough hook with the shorter
hook into the smaller socket (Figure
4/a). Place the dough hook with the
longer hook into the larger socket
(Figure 4/b).
1Push the accessories into the accessory
slots until they click into place!
3You may need to twist the accessories
slightly to engage them in position
prior to pushing them into place.
Lowering the mixer
(Figure 6)
0Press the raise/lower button (Figure
1/D) and swing the mixer down, until it
clicks in place.
Locating/removing the mixing
bowl (Figure 5)
0Locate the mixing bowl on the guide
on the base and latch in place by
gently turning clockwise.
0To remove the mixing bowl, turn anti-
clockwise to unlatch.
3It may be necessary to hold the base to
prevent it rotating.
The off-centre position of the mixer
makes it easy to add ingredients while
the processor is in operation.
Removing accessories (Figure 7)
1Before releasing the accessories, switch
off the mixer and remove the plug
from the mains socket!
0To remove the accessories, hold firmly
with one hand, while pressing the
accessory release button (Figure 1/A).
Working with the mixer/
processor
1The appliance can be used for up to
10 minutes without stopping. It should
be allowed to cool each time following
prolonged, continuous operation (for
at least 20 minutes after using for
10 minutes without stopping).
1Maximum processing quantities:
Processing in the mixing bowl must not
exceed 2 kg solid or 3lliquid food-
stuffs.