ELEKTRA INDIE User manual

06/10/2017
INDIE
SPECIAL PROGRAMMING FOR THE TECHNICIAN
How to use the spe ial programming
1. Machine ready.
2. Select the screen "V10 Technician control access screen" (please see page 23 of
the instruction manual) y horizontal scrolling.
3. Scroll the touchscreen in quick sequence: UP - DOWN - LEFT - LEFT.
1st s reen: inizialitation of the new spart parts
1. Choose the delivery group - to e done for each group and confirm y the
"enter" key.
2. Choose if the Indie is two or three groups and confirm y the "enter" key.

2nd s reen: s roll left the tou hs reen for the servi e fun tions
1. BOILER HEATING ON OFF: press OFF and confirm y the "enter" key to service
the oiler.
2. WATER SUPPLY CONTROL ON OFF: close the water supply, press OFF and
confirm y the "enter" key to empty the hydraulic circuits of
•group 1
•group 2
•group 3
•hot water dispenser
To empty the group press the "K" manual utton.
To empty the hot water dispenser press the utton marked with the sym ol .
3. COFFEE PRODUCTION RESET: the machine records the num er of coffees
dispensed y each utton for each group.
Each dispensing activated y dou le uttons corresponds to two cups of
coffee.
These data can e zero-set y pressing "COFFEE PRODUCTION RESET" - To e
done for each group.
4. GENERAL RESET: press and confirm for factory setting.