Elite Fitness IT 9300-E User manual

1
Deluxe Inversion Table
Model IT 9300-E
Owner’s Manual
Photo may differ from actual product
CAUTION:
WARNING: Do not use this
inversion table without a
physician’s approval.
Do not let children use the
inversion table unsupervised.
Read all instructions carefully
before using.
Tighten all bolts before using
equipment.
Leave adequate space to
properly invert.
.
Questions/ Comments
PLEASE DO NOT CONTACT THE
STORE
Elite Fitness is committed to
providing the very best of quality
and customer satisfaction for all of
the products we distribute. If for
any reason , you are dissatisfied
with the product you have
purchased or need assistance in
any way, please do not hesitate to
contact our knowledgeable support
staff at: 623-888-6379
Mon.-Fri 9:00 am –5:00 pm Mountain Time

2
BEFORE BEGINNING ASSEMBLY…
Take a few moments to familiarize yourself with the specific parts and hardware included with your
product. Make sure all the parts and hardware are included in the carton and examine them for any
damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed.
CAUTION
WARNING:
Before starting any exercise program, consult your physician.
Read all instructions very carefully before using equipment
Tighten all bolts securely before using equipment
Product Warranty
Limited Liability
Elite Fitness warrants that this product will be free from defects in materials and workmanship for a period
of ninety ( 90 ) days from date of purchase. This warranty applies only to the original purchaser when
purchase of the product is from an authorized retailer and is for personal or household use, but not when
the sale is for commercial use. This warranty is not transferable.
EXCEPT FOR THE LIMITED EXPRESS WARRANTY STATED HEREIN, Elite Fitness DISCLAIMS ALL
OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Elite Fitness, will not be liable for any loss or damage, including incidental or consequential damages of
any kind, whether based upon warranty, contract or negligence and arising in connection with the sale, use
or repair of the product.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
In the event of failure of this product to conform to this warranty during the warranty period, please call Elite
Fitness Customer Service Number at 623-888-6379 for assistance in the repair or replacement of the
product or any covered part. Elite Fitness will repair or replace, at its own option, the product or any
covered part, except that this warranty does not cover damage caused by accident ( including transit) , or
repairs or attempted repairs by any person not authorized by Elite Fitness, or by vandalism, misuse, abuse,
or alteration. The Warranty Period is based on the purchase date of the product validated by the
Authorized Retailers Register Receipt, or valid copy of transaction statement.
If you require service under this warranty, please call Customer Service at ( 623-888-6379)
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

4
Parts Identifier

5
Parts Identifier

6
Exploded View

7
Base Frame and Handlebar Assembly
STEP 1- Base Frame
Unfold Top Base Frame Left ( 1-L) and insert Bottom Base Frame Left ( 2 &3)
along with Support Tube Front (4) and Support Tube Rear (5) using Bolts (15)
and Bolts (18)
Repeat for Right Side of Frame as shown.
Attach Base Frame End Caps (14) to Bottom Base Frames (2 &3).
Rear
Front
Rear
Front

8
Handlebar Assembly
STEP 2
Attach the Handlebars (6) to the rear side of Top Base Frames
( 1-L & 1-R) using 4 Bolts (15), 4 Washers (16), and 2 Nuts (17).
Insert Ball Pin (21) into hole on Top Base Frame ( 1-R)
TIGHTEN ALL BOLTS and NUTS AT THIS TIME
Front
Rear

9
Backrest Support Tube Assembly
STEP 3
Attach Backrest Support Frame (7) to the rotating plates of the Top Base Frames (1-L
& 1-R) using 4 Bolts (20) 4 Washers (16) and 4 Nuts (17).
Note: Short Side of Back Rest Support Frame should face to the Front.
Note: Tighten All Bolts and Nuts at this Time
Front Rear
Rotating Plates
Short Side

10
Backrest Assembly to Base Frame
STEP 4- Connecting
Backrest Pad and
Headrest
Attach the Backrest Pad
(8) to the completed
Backrest Tube Assembly
using 4 Bolts (9) and 4
Washers (16) as shown.
NOTE: TIGHTEN ALL
BOLTS & NUTS AT
THIS TIME

11
STEP 5-Body Height Adjustment Tube and Rollers
Pull out Adjustable Leg Tube and position horizontally as shown. ( This will have spring pre-
assembled inside Tube from factory which should not be removed) Slide 2 Foam Leg
Rollers (25) over Leg Tube ( 11) and cap ends with 2- Round End Caps (26)
Insert Leg Tube Rear (12) through Back section of Height Adjustment Tube (10) and secure
with Bolt 30 and Nut (31) Slide 2 Foam Leg Rollers (25) over Rear Leg Tube ( 12) and cap
ends with 2- Round End Caps (26)
Screw Leg Tube Adjustment Knob (24) into Height Adjustment Tube (10). Pull up on Pin for
proper fit.
NOTE: TIGHTEN ALL BOLTS AT THIS TIME
Install Foot Rest Plate (13) into Body Height Adjustment Tube (10) using Bolt
(27) Washer (28) and Lock Nut (29).
Back
Front

12
STEP 6-Final Assembly
Slide Completed Height Adjustment Tube (10) into Backrest Support
Tube ( 7) and lock into place using Height Adjustment Knob (23).
Ball Pin (22) is used to lock Height Adjustment Tube in place when
desired Height Adjustment is obtained.
Install Rear Safe T Bar ( 32) in desired inversion stop position
Note: This product is designed to adjust from 4’10” to 6’6” with a
Maximum User Weight of 250 LBS.
NOTE: TIGHTEN ALL BOLTS AND NUTS AT THIS TIME

Final Assembly
13
Make Sure All Nuts
Bolts and Screws
are Completely
Tightened Before
Use.
Extreme Products Group
6635 W. Happy Valley Rd.
Suite A-104, #213
Glendale, AZ 85310
Phone: [phone]
Fax: [phone]
www.extremeproductsgroup.com

14
PRECAUTIONS
WARNING: 250 LB WEIGHT CAPACITY
To reduce the risk of serious injury, read all important precautions
instructions and warnings in this manual before using the Inversion
System. Elite Fitness, or Extreme Products Group assumes no
responsibility for personal injury or property damage sustained by or
through the use of the Inversion System.
DO NOT USE THIS INVERSION TABLE WITHOUT A PHYSICIAN’S
APPROVAL, OR IF YOU HAVE ANY OF THE FOLLOWING CONDITIONS
(this list is for reference only, it is not an exhaustive listing):
Pregnancy; Hiatal Hernia, ventral hernia; glaucoma, Retinal Detachment or
Conjunctivitis; High Blood Pressure, Hypertension, recent Stroke or Transient Ischemic
Attack; heart or Circulatory Disorders for which you are being treated; Spinal Injury;
Cerebral Sclerosis; Acutely Swollen Joints; Bone Weakness ( Osteoporosis ), recent
unhealed fractures, medulary pins and surgically implanted orthopedic supports; the
use of anticoagulants, including high doses of aspirin; Middle Ear Infections’ Extreme
Obesity.
IF YOUR PHYSICIAN PERMITS YOU TO USE INVERSION THERAPY,
DO SO UNDER THEIR DIRECTION AND HAVE OUR GUIDELINES
APPROVED BY YOUR PHYSICIAN.
DO NOT LET CHILDREN USE THE INVERSION TABLE
UNSUPERVISED.
THERE ARE CERTAIN PEOPLE WHO SHOULD NEVER INVERT. IF
YOU THINK YOU BELONG TO THIS MINORITY, PLEASE CHECK WITH
YOUR PHYSICIAN BEFORE USING THIS INVERSION TABLE.
INSURE THAT ALL NUTS, BOLTS, AND SCREWS ARE COMPLETELY
TIGHTENED BEFORE USING THIS PRODUCT.
SECURE YOUR ANKLES AND LOCK PULL PIN IN PLACE BEFORE
INVERTING

15
USAGE GUIDELINES
INVERSION SAFE T BAR
Familiarize yourself with the
Inversion Safe T Bar located on
the Back of the Inversion Table
Frame. The positioning of the
Bar will determine the degree of
Inversion that you are
comfortable with.
The 3 selections are:
Top Position -Slight Inversion
Middle Position-Moderate
Inversion
Lower Position- Enhanced
Inversion
NOTE: IT IS STRONGLY RECOMMENDED THAT SOMEONE BE
WITH YOU DURING INVERSION. ALTHOUGH THE INVERSION
TABLE IS EASY TO USE, HAVING SOMEONE NEARBY TO “SPOT"
YOU WILL PROVIDE EXTRA SAFETY AND SUPPORT TO THE
INVERSION PROCESS.
Body Height and Weight Adjustment:
Before Starting, insure that the
Inversion Table is at the correct
settings to match your height and
weight. As each individual’s body
type is different, you will need to find
the correct settings for your specific
body type
Photo shown may not represent actual product

16
USAGE GUIDELINES- Securing Feet and Ankles
WARNING: ALWAYS WEAR ATHLETIC SHOES WITH LACES TIGHT
TO HELP SECURE YOUR FEET IN THE INVERSION SYSTEM, AND FOR FOOT
PROTECTION WHILE EXERCISING.
ALWAYS MAKE SURE THAT THE ANKLE LOCK IS SECURED SNUGLY
AGAINST YOUR ANKLES AND THAT THE LONG KNOB IS FULLY
TIGHTENED BEFORE YOU USE THE INVERSION SYSTEM
Step 1- Expand the front
rollers by pulling up on the
Leg Tube Adjustment
Knob ( 24)
Step 2- Slide
Feet under
Foam Rollers
Step 3- Contract the front
rollers snugly over feet by
releasing the Leg Tube
Adjustment Knob and making
sure it “Locks” into place
Photo’s shown may not represent actual product

17
USAGE GUIDELINES
Finding the Proper Height and Weight Adjustment
With head flat on back pad, slowly raise one arm up
toward the ceiling. If the bed starts to invert backward,
the height adjustment should be correct.
If the bed does not start to invert, adjust the center slider
arm upward one position at a time, until the bed starts to
invert backward. Remember to use very slow arm
movements.
By raising both hands over your head, the
Inversion Table should now invert to a greater
degree, provided that you are comfortable with the
position of the safe-t-bar.
Note: It is recommended that beginners use the
Top Position Inversion Setting ( Slight Inversion)
until they are comfortable with inversion.
With proper supervision, and provided you are
comfortable with the Middle or Lower
Inversion Safe-t-bar setting, the Inversion
Table will now allow for a more complete
Inversion position.
CAUTION: BY LOWERING THE HANDS BACK TO THE
STARTING POSITION, THE INVERSION TABLE SHOULD
REVERT BACK TO THE UPRIGHT POSITION. IF IT DOES
NOT, USE THE BUILT IN SIDE HANDLEBARS TO PULL
YOURSELF BACK UP AND RE-ADJUST THE CENTER
SLIDER TO ACCOMMODATE YOUR BODY WEIGHT AND
TYPE.
Photo’s shown may not represent actual product

18
ELITE FITNESS
Distributed By:
Extreme Products Group
6635 W. Happy Valley Rd.
Suite A-104, #213
Glendale, AZ 85310
Phone: [phone]
Fax: [phone]
www.extremeproductsgroup.com
Note: For all parts requests, please visit our web site:
www.extremeproductsgroup.com