- 1 -
EN MANUAL
1) Open the battery cover, then insert the two AA batteries into the
battery compartment
2) Determine the installation location and mark this position
3) Drill holes into the marked spots
4) Use the anchors to secure the screws. Place the camera on the marked
spot and turn in the screws completely so the device is properly installed
5) We recommend you to place the sticker in a visible location
DE ANLEITUNG
1) Öffnen der Batteriefachabdeckung, dann legen die beiden AA-Batterien in
der angegebenen Polung in das Batteriefach ein
2) Bestimmen Sie den Montageort und markieren diese Position durch die
drei Bohrlöcher
3) Bohren Sie Bohrlöcher in den markierten Stellen
4) Nutzen Sie die beigelegten Dübel, damit die Schrauben sicheren Halt
haben.Setzen Sie die Kamera an die markierte Stelle unddrehen Sie die
Schrauben vollständig ein, so ist das Gerät ordnungsgemäß installiert
5) Wir empfehlen Ihnen, den Aufkleber an einer gut sichtbaren Stelle
zu platzieren