Emerald MB-NTG4 User manual
Specification & Installation
Model: MB-NTG4
Mercedes-Benz NTG 4.5 / 4.7
Warning
When installing the main unit, do not remove or alter existing
vehicle fasteners, including nuts, bolts, screw, clips, and fittings.
Never detach, move or alter existing vehicle wiring, including
electrical grounds and straps. Alteration of existing vehicle
components may make vehicle unsafe to operate. Should be no
any electronic devices or magnetic pole around installation place.
Air bags are vital part of a safety system. Never install main unit in a
way which will alter air bag wiring or interfere with air bag
deployment. Air bags must function properly in the event of an
accident.
Before installing, check the location of pipe, tank, electrical cables
and others.
Read and follow the instruction manual.
Wiring location must not interfere driving, get in or out from car.
Use electrical tape to insulate the ends of all wires, even if they are
not used. Proper insulation prevents arcs, shocks and fires.
When installation is complete, test all vehicle electrical systems to
ensure they operate correctly, including lights, horn, brake lights,
and emergency flashers.
According to our sales policy, any problems caused byuser’s
mistake, careless can not be guaranteed.
Warning / Caution
Caution
All steps of installation should be done by well-trained specialist.
During installation ignition key should be taken off and after all installation
finish connect power cable with interface for the last step.
Do not install the main unit inplaces where it mabe exposed to dew
condensation (aroundthe air conditioning hose, etc), or in locations where
it may come in contact with water, high levels of moisture, dust or oily smoke
Install wiring in amanner inwhich cables will not come incontact with
metal parts. The wiring may be damaged by contact with metal parts,
resulting in fire and shocks. Avoid all contact with hot surfaces when wiring
the main unit. High temperatures may damage wiring, causingshorts, arcing
and fires.
Kindlycheck all parts are in the box, when receiving the product, if anything
missing, inform to the supplier or manufacturer.
www.EmeraldIntegrations.com
Phone: (844) 333-3903 2
Mercedes-Benz Interface Module Installation - Part 1
Disconnect the FACTORY LVDS CABLE from
the back of the HEAD UNIT, not the monitor.
- This is typically a GREY or PINK LVDS cable.
If you get NO SCREEN CHANGE
or a BLACK SCREEN in reverse,
please check DIP 4 which
corresponds to the screen resolution
www.EmeraldIntegrations.com
Phone: (844) 333-3903 3
Note:
1.
Please make sure the key is NOT in the ignition or on ACC mode when starting the installation process.
2.
Please make sure this interface matches your car model using the compatibility chart.
LVDS at the rear ofCOMAND unit
interface LVDS
CAN&POWER
(40 way Interface Quadlock)
40 way Quadlock connector
Original Quadlock
to Interface
Interface Quadlock
1. Using trim removing tools, remove
the main radio command system as
shown above. (Position depends on
the car model)
2. Plug the OEM LVDS cable to the
designated LVDS IN of the interface
module. (OEM LVDS shown in
picture 3)
4. Using the provided Quadlock cable,
unplug the OEM, connect it to the
female end of the supplied Quadlock
and insert the new Quadlock into the
OEM port.
Above is the supplied Quadlock
plugged into the OEM port.
5. Connect the AV harness into the
module.
6. Connect a rear camera to the
REAR CAM IN and front camera to
FRONT CAM VIDEO IN (Front
Camera sold Separately)
7. With the unit powered up, we can
now turn on the vehicle and place it
in reverse to test. Please note, it's
always best to test out the camera
committing to
angle before fully
mounting it.
Mercedes-Benz Interface Module Installation - Part 2
3. Using the provided LVDS cable,
connect the module to the OEM screen to
close off the loop. (Green of Black LVDS)
Customer Service
At Emerald we want to make sure that you are completely satisfied, therefore we have assembled qualified
associates to assist you.
Our normal operating hours are Monday - Thursday 9:00 AM - 5:00 PM and Friday 9:00 AM - 4:00 PM (Pacific Standard Time).
Call us Toll Free: 844-333-3903
Email us: [email protected]m
Returns
30-Day Money-Back Guarantee
At Emerald Integrations, we want to make sure that you are completely satisfied. If for some reason you aren't happy with an item on your order and want to return it, we
make returns and refunds extremely simple.
Any complete, like-new item returned within 30-days can be returned for a full refund less the original cost of shipping. All items or packages shipped free of charge will be
subject to a $15.00 shipping fee. If returned items are not in like-new condition, then Emerald Integrations may refuse a return or charge a restocking fee of 10% - 20%.
Items not in like-new condition include, but are not limited to: items missing original item packaging, opened software or media items, used items, installed items, abused
or physically damaged items, items missing parts, items damaged due to improper return shipping, items with a different serial number or defaced serial number, pre-cut
wire, made-to-order items and special order items. All returns must be shipped back in a shipping carton, items cannot be shipped back in product boxes. Should you
have any questions about our return procedure, please don't hesitate to contact us.
Return Disclaimer
Any unauthorized, improperly packaged, or non-insured packages will be returned to sender. Items that show signs of wear or have been, scratched, altered, or damaged
in any way cannot be accepted for return.
Warranty
Emerald Integrations understands that there are minor chances that electronics can fail and defects happen, in the event that this occurs, Emerald Integrations is here to
help you quickly resolve your defect for a full year of 1-Year Warranty Coverage. Unlike others who push you to a manufacturer service center that can be slow and
unresponsive, we’re here to help with the repair or replacement you need. To begin the process, follow the instructions on the returns page at
www.emeraldintegrations.com/returns.
The terms of the warranty are subject to the specific manufacturer and all expressed and implied war-ranties are provided solely by the manufacturer. Every item
approved for a warranty claim is inspected by our team of qualified experts and professionally tested.
Emerald Integrations is a retail and wholesale distributor of vehicle electronic components, specializing in car safety. Emerald tests each product individually to ensure
optimal performance and is NOT responsible for any negligence or damages caused by the installation process. Should a customer request assistance in finding an
installer, Emerald holds no liability for any installers recommended by Emerald, it's employees or affiliates.
www.EmeraldIntegrations.com
Phone: (844) 333-3903 5
Table of contents
Other Emerald Car Video System manuals
