Emerson Liebert itON BX User manual

The UPS has six battery backup outlets that provide power
when the UPS operates on battery. (See Figure 2 on next page)
Step 5 Connect the Loads
Step 6 Connect Modem/Phone/Network for Surge Protection
The UPS has two RJ-45 jacks for modem/phone/network. (See Figure 2 on next page)
Connect a single modem/phone line into
surge-protected “IN” outlet on the back panel
of the UPS unit.
Connect from “OUT” outlet
to the computer with
another phone line cable.

RJ-45 Modem/
Phone/Network
surge protection
Battery backup
outlets(6)
Input breaker
BX
6 minutes
4-6 hours to 90%
12V x 7 Ah x 2
32 to 104 (0 to 40)
-4 to 122 (-20 to 50)
0 90%, non-condensing
Stepped sinewave
+10% & 10%
220VAC/230VAC/240VAC
45 - 55Hz ±1Hz/55 - 65Hz ±1Hz
162-290 VAC
5.75 x 13.8 x 6.3 (146 x 350 x 160)
17.63 (8.0)
1000/600
Capacity (VA/W)
Net Weight, lb. (kg)
On-Line Input Voltage
On-Line Frequency Range (50Hz/60Hz)
Output Voltage (Utility Power Normal)
Output Voltage (Battery Operation)
On-Battery Wave Form
Typical Recharge Time
Battery Run Time* Half Load (1000VA)
Operating Temperature,
Storage Temperature,
Operating /Storage Relative Humidity
Dimensions W x D x H, in. (mm)
Battery Type VDC x Ah x Quantity