Enclume Lr14nt Instruction manual

LR14NT - FRONT LOADING

STORAGE RACK

Enclosed you will find everything needed for the assembly

and use of your hearth rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

8 -3/8” x 1/2" Button head Screws

6 -3/8” x 5/8" Button head Screw

4 - Hard Glides

2 - Plastic End Caps

1 – 7/32” Allen Wrench

Components included:

2 - Legs 1-Broom

2 - Leg Supports 1-Shovel

2 - Curved Connection Bars 1-Poker

2 - "U" Shaped Body Pieces

2 - Kindling Holders

1 - Tool Bar

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Rack Assembly

1) Put together legs, leg supports and hard glides. Use 4-1/2" button head screws.

2) Connect to each other with the curved connectors (curve towards the bottom) placed against the bottom of the leg

units. Leave screws finger tight. Use 4 -1/2" button head screws.

3) Place "U" shaped body pieces on top of leg units, aligning holes , screw down finger tight. Use 4-5/8" button head

screws.

4) Square - up rack and tighten all screws.

5) Attach kindling holders to the outside of the storage unit. Use 2- 5/8" button head screws.

6) Insert tool bar through the top two loops on the "U" shaped body pieces or the loops on the kindling holders. Push

plastic end caps over each end of the tool bar.

7) Hang tools from the tool bar. Your rack is now complete.

It is important that your rack is assembled correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

Natural broom straw is flammable. Keep the broom well away from open flame. It should not

be used to sweep hot coals or ash.

WARNING

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy

shall be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within

the warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within

20 days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer