SimpliFire SF-INS30-BK User manual

1
SimpliFire • SF-SI4027-BK, SF-SI4432-BK Installation Insructions • 2042-922 • 11/18
SF-SI4027-BK, SF-SI4432-BK
Model: SF-INS30-BK
Installation Instructions -
INTRODUCTION
The surround is required for the nished installation of the
SF-INS30-BK. The surround is designed to overlap the
existing opening of the existing replace or constructed
chase.
Leave this manual with party responsible for use
and operation.
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
SURROUND KIT COMPONENTS
• (1) Surround
• (4) ST4X8 Screws (attached to shipping bracket)
TOOLS NEEDED
• Magnetic Phillips Screwdriver
CAUTION! Do not install damaged components.
Install Surround
1. Remove the surround and hardware from the packag-
ing.
2. Remove protective bag from the surround.
3. Remove the shipping bracket by removing the four
screws that attach the bracket to the surround. Keep
the four screws to use later to attach surround to
appliance. Discard the bracket. See Figure 1.
4. Locate the surround on the appliance and attach it to
the appliance with four ST4X8 screws. See Figure 2.
Verify that the surround is securely attached to the
appliance.
SHIPPING BRACKET
REMOVE AND RETAIN SCREWS
Figure 1

SimpliFire • SF-SI4027-BK, SF-SI4432-BK Installation Insructions • 2042-922 • 11/182
SCREW
(x4)
Lorem
31-1/8 in.
40 in.
20-3/4 in.
27 in.
7/8 in.
32 in.
31-1/8 in.
44 in.
20-3/4 in.
7/8 in.
Height Width Depth
SF-S14027-BK in. 27 40 7/8
mm 686 1015 20
SF-S14432-BK in. 32 44 7/8
mm 813 1118 20
SimpliFire, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.hearthnhome.com
Please contact your SimpliFire dealer or customer / technical support
(877-320-0730) with any questions or concerns.
For the location of your nearest SimpliFire dealer,
please visit www.hearthnhome.com.
Figure 2