Enclume QR1 User manual

Enclume QUILT RACK
QR1
Enclume racks are the ultimate in
Quality, design, strength and function.
Congratulations for owning one of the finest
Storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS
BEFORE ASSEMBLING AND USING
YOUR RACK.
All of our hammered steel racks are finished with an industrial wax designed to
give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry
thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge"
like wax product.
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
10 – 3/8” x ½” Button Head Screws
1 – 7/32” Allen Wrench
Components included:
2 – Upright Supports
2 – Side Cross Supports
2 – Lower Brackets
1 – Top Cross Bar (with curled ends)
See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy
shall be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within
the warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage
prepaid within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being
provided to the customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone [phone] •Fax [phone]
www.enclume.com

ASSEMBLY AND INSTALLATION INSTRUCTIONS for QR1
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
10 – ½” Button Head Screws
1 – Hex Key
Components included:
2 – Upright Supports
2 – Side Cross Supports
2 – Lower Brackets
1 – Top Cross Bar (with curled ends)
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Place the side cross bars on the inside of the upright supports and attach with four ½” buttonhead screws, going from outside the
upright supports through the side cross bars, so that the heads of the screws show from the outside of the rack. Leave loose.
2) Place the top cross bar underneath the top of the upright supports. Attach the top cross bar by screwing in the remaining two
buttonhead screws from the top of the upright supports through the bottom of the top cross bar.
3) Square up your quilt rack and tighten all buttonhead screws with the hex key provided.
4) Your quilt rack is now fully assembled and ready to display your favorite quilt or blanket.
5) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is
easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax
product.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone [phone] •Fax [phone]
www.enclume.com