Endress+Hauser Tankvision Multi Scan NXA83B User manual

Products Solutions Services
BA01287G/00/EN/04.18
71421613
2019-02-13
Valid as of software version:
3.4.0 and 4.4.0
Operating Instructions
Tankvision
Multi Scan NXA83B
Installation and Maintenance manual
Weights and Measures Additions

Tankvision Multi Scan NXA83B
2Endress+Hauser
A0023555
Order code:
Ext. ord. cd.:
Ser. no.:
www.endress.com/deviceviewer Endress+Hauser
Operations App
XXXXXXXXXXXX
XXXXX-XXXXXX
XXX.XXXX.XX
Serial number
1.
3.
2.

Tankvision Multi Scan NXA83B
Endress+Hauser 3
Table of Contents
1 Document information . . . . . . . . . . . . . . 4
1.1 Target audience for this manual . . . . . . . . . . . . . . . 4
1.2 Version history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Document function . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Basic safety instructions . . . . . . . . . . . . . 6
2.1 Requirements for the personnel . . . . . . . . . . . . . . . 6
2.2 IT security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4 Workplace safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5 Operational safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Product safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 W&M Functionality . . . . . . . . . . . . . . . . 10
4.1 Name Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2 Unlocking the system . . . . . . . . . . . . . . . . . . . . . . 10
4.3 Locking the system . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4 Rear access panel . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.5 W&M display features . . . . . . . . . . . . . . . . . . . . . 15
4.6 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.7 W&M Calibration . . . . . . . . . . . . . . . . . . . . . . . . . 17
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Document information Tankvision Multi Scan NXA83B
4Endress+Hauser
1 Document information
1.1 Target audience for this manual
This manual is giving detailed information on the system capabilities and architecture. It
supports project and sales engineers in designing the system architecture during acquisition
and execution phase. Furthermore during operation time of the system all servicing
personnel in need of detailed knowledge about the system capabilites.
1.2 Version history
1.3 Document function
1.3.1 Used symbols
Safety symbols
Document version Valid for SW version Changes to the previous version
BA01287/00/EN/01.14 3.0.10 Initial version
BA01287/00/EN/02.15 3.0.12 Change of order code structure
BA01287/00/EN/03.16 3.1.0 and 4.0.0 Old V1 support and simplified
configuration
BA01287/00/EN/04.18 3.4.0 and 4.4.0 Changes to V1 Driver and GBT
calculations
Symbol Meaning
A0011189-EN
DANGER!
This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
A0011190-EN
WARNING!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
A0011191-EN
CAUTION!
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
A0011192-EN
NOTICE!
This symbol contains information on procedures and other facts which do not result
in personal injury.
DANGER
WARNING
CAUTION
NOTICE

Tankvision Multi Scan NXA83B Document information
Endress+Hauser 5
Symbols for certain types of information
Symbols in graphics
1.4 Documentation
1.4.1 Operating instructions
Symbol Meaning
A0011193
Tip
Indicates additional information.
A0011195
Reference to page
Refers to the corresponding page number.
, , ... Series of steps
A0018373
Result of a sequence of actions
Symbol Meaning
1, 2, 3 ... Item numbers
, , ... Series of steps
A, B, C... Views
A0011187
Hazardous area
Indicates a hazardous area.
A0011188
Indicates a non-hazardous location
Safe area (non-hazardous area)
Document number Instrument Type of Document
BA01288G/00
•MultiScanNXA83B
Operation manual
BA01290G/00 Installation and Maintenance manual
BA01291G/00 Configuration manual
BA01292G/00 DCC Configuration manual
BA01289G/00 OPC Tank Data Server manual
BA01297G/00 Web Client System Operation manual
BA01287G/00 Weights and Measures Additions
BA01296G/00 Redundancy manual
1.
2.
1.
2.
-
.

Basic safety instructions Tankvision Multi Scan NXA83B
6Endress+Hauser
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel for installation, commissioning, diagnostics and maintenance must fulfill the
following requirements:
• Trained, qualified specialists: must have a relevant qualification for this specific function
and task
• Are authorized by the plant owner/operator
• Are familiar with federal/national regulations
• Before beginning work, the specialist staff must have read and understood the instructions
in the Operating Instructions and supplementary documentation as well as in the
certificates
(depending on the application)
• Following instructions and basic conditions
The operating personnel must fulfill the following requirements:
• Being instructed and authorized according to the requirements of the task by the facility's
owner operator
• Following the instructions in these Operating Instructions
2.2 IT security
We only provide a warranty if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide
additional protection for the device and device data transfer must be implemented by the
operators themselves.
Endress+Hauser can be contacted to provide support in performing this task.
2.3 Designated use
2.3.1 Applications
Inventory control
By using Tankvision Multi Scan to monitor the tank level and stored volume of valuable
liquids remotely, owners or operators of tank farms or terminals for petroleum products and
chemicals (liquids) can visualize the volume of the stored medium in real time. The data can
be used to plan the inventory and distribution. The data can also be used to manage tank
farm operations like pumping or transferring products. Tankvision has its unique concept
using network technology. Without using proprietary software, the users can visualize and
manage their valuable liquids stored in the tanks by a web browser. Tankvision Multi Scan
is a flexible and cost effective solution due to its scalable architecture. The application
coverage goes from small depots with only a few tanks up to refineries.
Inventory Calculations
Tankvision Multi Scan calculates based on measured variables and tank capacity tables:
• Observed/Gross volumes,
•Netvolumesand
•Mass

Tankvision Multi Scan NXA83B Basic safety instructions
Endress+Hauser 7
of products like
• Hydrocarbons,
• Liquefied gases,
• Asphalt.
They are corrected according to international standards, including API/ASTM tables 5A, 5B/
6, 53A, 53B/54, 23/24, LPG.
This includes temperature corrections at 15 °C, 60 °F and alternative temperatures.
Additionally, available pumpable volumes and water volume are calculated.
Remote configuration of measuring equipment
Some on-site operations can be avoided using remote configuration of measuring equipment
during commissioning or maintenance (the availability of this feature may depend on the
system configuration).
Application areas
• Tank farms in refineries
• Ship loading terminals
• Marketing and distribution terminals
• Pipeline terminals
• Logistic terminals for tanks storing products like crude oils, refined white and black
products, chemicals, LPG
2.4 Workplace safety
For work on and with the device:
• Wear the required personal protective equipment according to federal/national
regulations.
• Switch off the supply voltage before connecting the device.
2.5 Operational safety
Risk of injury!
• Operate the device in proper technical condition and fail-safe condition only.
• The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers
• If, despite this, modifications are required, consult with Endress+Hauser.
Repair
To ensure continued operational safety and reliability,
• Carry out repairs on the device only if they are expressly permitted.
• Observe federal/national regulations pertaining to repair of an electrical device.
• Use original spare parts and accessories from Endress+Hauser only.
2.6 Product safety
The device is designed to meet state-of-the-art safety requirements, has been tested and left
thefactory in a condition in which it is safe to operate. The device complies with the
applicable standards and regulations as listed in the EC declaration of conformity and thus
complies with the statutory requirements of the EG directives. Endress+Hauser confirms the
successful testing of the device by affixing to it the CE mark.

Overview Tankvision Multi Scan NXA83B
8Endress+Hauser
3Overview
This manual describes the additional features of the Weights and Measures version of the
Multi Scan NXA83B, designated as Tankvision Multi Scan NXA83B W&M. The standard
features of the Multi Scan NXA83B are described in the Tankvision Multi Scan NXA83B I&M
manual.
The Multi Scan NXA83B is a configurable system designed for tank gauging and tank
inventory management systems.
It has been designed to fulfil a number of requirements some of which are listed below:
• Act as a foreign device gateway allowing old legacy equipment and devices with
proprietary interfaces to interface with modern devices using OPC and Ethernet
Technology
• To provide a complete tank gauging and tank inventory management system for small
sites. It can interface directly with a wide variety of tank gauging devices and provide a
number of communication links to host devices. The Multi Scan NXA83B polls the field
instruments maintaining an in-memory database of live and calculated data whilst also
being able to service host computers for data.
• It can provide up to 8 serial interfaces, capable of supporting a range of different electrical
interfaces such as RS232, RS485, BPM, Current Loop etc.
• An Ethernet port and two USB ports are also provided.
• There is a 7 in LCD touch screen built into the front of the device, with navigation via the
screen.
• The Weights and Measures version of the Multi Scan NXA83B supports extra functionality
so that the database and operating system can be physically locked and sealed by W&M
personnel. A system that has been sealed cannot have any changes carried out to the
operating system, tankgauging firmware, tankgauging database or any access to the flash
drive.
• The Weights and Measures version of the Multi Scan NXA83B is only available in the the
Wall and Rack Mount format without touch display.
• The Weights and Measures version of the Multi Scan NXA83B does not support a local
USB mouse or keyboard, these will be permanently disabled.

Tankvision Multi Scan NXA83B Overview
Endress+Hauser 9
NXA83_WallMount_Title
Wall Mount
NXA83_RackMount_Title
19 in Rack Mount

W&M Functionality Tankvision Multi Scan NXA83B
10 Endress+Hauser
4W&MFunctionality
4.1 Name Plate
nameplate
1 Address of manufacturer
2Devicename
3Ordercode
4 Extended order code (Ext. ord. cd.)
5 Serial number (Ser. no.)
6 Degree of protection
7Barcode
8CEmark
9 Admissible ambient temperature
10 Supply voltage
On the Wall Mount version of the Multi Scan NXA83B, the name plate is attached on the
right hand side of the cover.
On the Rack Mount version of the Multi Scan NXA83B, the name plate is attached on the left
side of the front.
The name plate is attached with seals to the Multi Scan NXA83B.
4.2 Unlocking the system
The system must be unlocked before any modifications to the database/firmware can be
carried out, e.g. during commissioning.
There is a physical lock device inserted into the LX2 motherboard. This must be removed to
unlock the system. To gain access to the lock device, the front panel must be removed,
including the lead seals.
To unlock a Multi Scan NXA83B:
Break the seals on the top right and bottom left of the cover. These seals will consist of
lockwire through a hole in the cover and chassis (see diagram of hole location in Locking
section).
250002972--
Order code:
Ext. Order code:
Ser.-No.:
Ta nkvision
12345
7
8
9
10
6