Eneo IND Series User manual

EN
User Manual
Network Camera, Day/Night
IND- & INB-Series
INP-58M2812M0A
Learn more about eneo IN series
on our YouTube channel. 

User Manual
1
Table of Contents
Introduction...................................................................................................................................................................4
Statement:.....................................................................................................................................................................4
CAUTION........................................................................................................................................................................4
1、Overview .................................................................................................................................................................5
1.1、Range of Application ....................................................................................................................................5
1.2、Product Description...................................................................................................................................... 5
1.3、Operation Environment................................................................................................................................6
2、Device Connection...................................................................................................................................................6
2.1、Connection to PC..........................................................................................................................................6
2.2、Connection to router/switch ........................................................................................................................6
3、Network Connection & IP Assignment ....................................................................................................................7
4、Web Log in...............................................................................................................................................................8
4.1、Initial login....................................................................................................................................................8
4.2、Log-in............................................................................................................................................................9
4.3、Reset Password...........................................................................................................................................10
4.3.1、Security Question Configuration................................................................................................10
4.3.2、Certificate of Authorization..........................................................................................................10
4.3.3、Super Code...................................................................................................................................11
4.4、Password Expired .......................................................................................................................................11
5、Plug-in Installation.................................................................................................................................................12
6、Preview..................................................................................................................................................................12
6.1、Live .............................................................................................................................................................12
6.2、Recording Status.........................................................................................................................................13
7、Playback.................................................................................................................................................................14
7.1、General Playback ........................................................................................................................................14
7.2、Picture Search.............................................................................................................................................15
7.3、Tag Playback ...............................................................................................................................................15
7.4、Smart AI......................................................................................................................................................16
7.5、AI ................................................................................................................................................................17
7.5.1、Face Detection .............................................................................................................................17
7.5.2、Human & Vehicle Detection........................................................................................................17
7.5.3、PID&LCD.......................................................................................................................................18
7.5.4、Repeat Customer.........................................................................................................................18
7.5.5、Face Attendance..........................................................................................................................19
7.5.6、License Plate................................................................................................................................21
8、Remote Setting ......................................................................................................................................................22
8.1、Live .............................................................................................................................................................22
8.2、Image Control.............................................................................................................................................23
8.3、Video Cover ................................................................................................................................................25
8.4、ROI .............................................................................................................................................................. 25
8.5、Record ........................................................................................................................................................26
8.5.1、Encode...........................................................................................................................................26
8.5.2、Record...........................................................................................................................................27
8.5.2.1、Record Parameters .......................................................................................................... 27

User Manual
2
8.5.2.2、Record Schedule..............................................................................................................28
8.5.3、Capture..........................................................................................................................................28
8.5.3.1、Capture configuration.......................................................................................................28
8.5.3.2、Capture Schedule.............................................................................................................28
8.6、Event...........................................................................................................................................................29
8.6.1、Setup..............................................................................................................................................29
8.6.1.1、Motion Setup .....................................................................................................................29
8.6.1.2、Sound Detection Setup.................................................................................................... 30
8.6.1.3、Deterrence Setup..............................................................................................................31
8.6.1.4、Video Tampering Setup ...................................................................................................32
8.6.2、Alarm..............................................................................................................................................33
8.6.2.1、Motion Alarm .....................................................................................................................33
8.6.2.2、I/O Alarm............................................................................................................................34
8.6.2.3、Sound Detection Alarm....................................................................................................35
8.6.2.4 Video Tampering Alarm.......................................................................................................35
8.7、AI ................................................................................................................................................................37
8.7.1、Setup..............................................................................................................................................37
8.7.1.1、FD .......................................................................................................................................37
8.7.1.2、PD&VD...............................................................................................................................39
8.7.1.3、PID......................................................................................................................................41
8.7.1.4、LCD..................................................................................................................................... 41
8.7.1.5、SOD....................................................................................................................................42
8.7.1.6、CC.......................................................................................................................................43
8.7.1.7、HM ......................................................................................................................................44
8.7.1.8、CD.......................................................................................................................................44
8.7.1.9、QD.......................................................................................................................................45
8.7.1.10、LPD...................................................................................................................................46
8.7.1.11、RSD ..................................................................................................................................47
8.7.1.12、AI Schedule.....................................................................................................................47
8.7.2、Recognition...................................................................................................................................48
8.7.2.1、Face Recognition..............................................................................................................48
8.7.2.2、License Plate Management ............................................................................................49
8.7.3、Alarm..............................................................................................................................................51
8.7.3.1、FD、AD、PD&VD、PID、LCD、SOD、CC、CD、QD、LPD、RSD....................52
8.7.3.2、FR .......................................................................................................................................53
8.7.3.3、FA（Face Attendance）..................................................................................................54
8.7.4、Statistics........................................................................................................................................54
8.7.4.1、Face Detection..................................................................................................................54
8.7.4.2、Human & Vehicle Detection ............................................................................................55
8.7.4.3、Cross Counting Statistics................................................................................................55
8.7.4.4、Heat Map Statistics ..........................................................................................................56
8.8、Network......................................................................................................................................................57
8.8.1、General..........................................................................................................................................57
8.8.1.1、General............................................................................................................................... 57
8.8.1.2、PPPoE................................................................................................................................58
8.8.1.3、SNMP.................................................................................................................................58
8.8.1.4、Port Configuration.............................................................................................................59
8.8.2、Email Configuration .....................................................................................................................59

User Manual
3
8.8.3、FTP ................................................................................................................................................60
8.8.4、RTSP .............................................................................................................................................60
8.8.5、DDNS.............................................................................................................................................61
8.8.6、HTTPS...........................................................................................................................................61
8.8.7、IP Filter ..........................................................................................................................................62
8.9、Device.........................................................................................................................................................62
8.9.1、Disk Management........................................................................................................................62
8.9.2、Audio Setting ................................................................................................................................63
8.9.3、Cloud..............................................................................................................................................64
8.10、System ......................................................................................................................................................64
8.10.1、General........................................................................................................................................64
8.10.1.1、Date and time.................................................................................................................. 64
8.10.1.2、Daylight Saving Time (DST) .........................................................................................65
8.10.2、Multi-user management............................................................................................................66
8.10.3、System Maintenance.................................................................................................................67
8.10.3.1、Log Management............................................................................................................67
8.10.3.2、Load Default....................................................................................................................68
8.10.3.3、Upgrade...........................................................................................................................69
8.10.3.4、Parameters Management..............................................................................................70
8.10.3.5、Automatic Maintenance.................................................................................................70
8.10.3.6、Developer Mode.............................................................................................................71
8.10.4、System Information....................................................................................................................71
9、Local Settings.........................................................................................................................................................72

User Manual
4
Introduction
Thank you for using our network camera products. Our network camera products are integrated and
developed for network video monitoring, including Storage Network Bullet, Wireless Storage Network
Bullet, IR Network Dome, IR Network Weather-Proof Cameras and High-Speed Network Ball. High-
performance single SOC chips are used in media processor for audio/video acquisition, compression and
transmission/transfer. Standard H.264/H.265 encoding algorithm is applied to ensure clear and smooth
video representation and transfer performance. Embedded Web Server offers users access to real-time
surveillance and remote control of front-end camera through IE browser.
The network cameras are easy to install and operate. The network cameras are applicable to large
and medium-size enterprises, governmental projects, large mall, chain supermarkets, intelligent buildings,
hotels, Hospitals and schools and other group customers, as well as to applications requiring remote
network video transmission and monitoring.
Instructions:
For purpose of this manual, IP camera means network camera.
Single click means a single click on the left mouse button.
Double click means a double-click on the left mouse button.
The default factory IP address for IP camera is 192.168.1.168.
The default factory administrator user name for IP camera is admin (in lowercase), The IP camera
needs to set the password according to the prompt for the first use。Details please refer to section 4.2 –
<Password>
The default Web port number is 80 and the default media port number is 9000. The ONVIF port
number is synchronized with the web port number.
Statement:
Some information contained in this manual may differ from the actual product. For any problems you
cannot solve with the use of this manual, please contact our technical support or the authorized dealers.
This manual may be subject to change without prior notice.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

User Manual
5
1、Overview
1.1、Range of Application
The network cameras with powerful image processing capacity may be applied at various public
places such as mall, supermarket, school, factory and workshop, as well as in environments requiring HD
video image such as bank and traffic control system, as shown below:
1.2、Product Description
An IP camera is a digital online surveillance camera embedded with Web server and capable of
independent operation, giving user access to real-time monitoring through web browser or client software
from any place across the world.
IP camera is based on the latest digital solution, an integrated media processing platform for
audio/video acquisition, compression and network transmission on a single board. It is in compliance with
H.264/ H265 High Profile encoding standards. Any remote user can have access to real-time monitoring
by entering the IP address or domain name of the IP camera in web browser. This network camera
solution is applicable to residential or business environments as well as a wide range of situations
requiring remote network video monitoring and transmission. The IP camera products are easy to install
and operate.
The IP cameras can be managed by several users with different authorization levels.
IP cameras allows mobile detection, and sends e-mail and snapshot taken in case of emergency and
store the image or video snapshot in SD card for retrieval.

User Manual
6
1.3、Operation Environment
Operating system: Windows XP / Windows 7/ 8/10/11 / MacOS 10 or above
CPU: Intel I3 or above
Memory: 2G or higher
RAM: 1G or higher
Display: 1024 × 768 or higher resolution
Browser: IE10 or higher version; Chrome 57 or higher version, Firefox 52 or higher version, Edge 41
or higher version; Safari 12 or higher version
2、Device Connection
IP camera can be connected in two ways:
2.1、Connection to PC
Connect IP camera to PC via straight-through network cable, with power input connected to a DC
12V adaptor, and set the IP addresses of the PC and IP camera in the same network segment. The IP
camera will communicate with PC within one minute after being powered on if the network operates
normally.
2.2、Connection to router/switch
This is more commonly used in connecting the IP camera to Internet, where the camera and PC are
connected to LAN ports of a router/switch, with gateway of the camera set to the IP address of the router.

User Manual
7
3、Network Connection & IP Assignment
The eneo Site Manager (downloadable from www.eneo-security.com) is used to locate all eneo
network cameras in a local network. Download and install the software from www. eneo-security.com.
Start the program. You will receive a list of available cameras in the local network.
Highlight your camera in the list and open a context menu by clicking the right mouse button.
Select the option “Network Settings” to get a window for the camera IP settings.
If necessary, uncheck “DHCP”. Make the necessary settings and confirm with “OK”. The
camera settings are updated.
Now you can also perform a factory reset of the camera inside the eneo Site Manager. For
further information, please refer to the eneo Site Manager Quick Start Guide.

User Manual
8
4、Web Log in
4.1、Initial login
In the first time accessing the web of the camera, you have to set an admin password to activate
your device. the interface as shown in Figure 4.1.1 will be popped up. Click to check password
requirements:
1、The password should be 8-15 characters, including letters, numbers orspecial characters.
2、8~9 characters: The combination should consistof at least 3 uppercase letters, lowercase letters,
numbers orspecial characters.
3、10~15 characters: The combination should consist of at least 2 uppercase letters, lowercase
letters, numbers or special characters.
4、It is forbidden to repeat and continuous characters exceeding 4 digits.
5、It is forbidden for the continuous keys of the keyboard pattern to exceed 4 digits.
Note: We highly recommend you to create a strong password of your own choosing (using a
minimum of 8 characters, including at least three kinds of following categories：uppercase letters,
lowercase letters, numbers and special characters) in order to increase the security of your products.
Figure4.1.1

9
User Manual
Set a new password, click OKto save, the interface shown as Figure 4.1.2 will pop up. You can check
to choose the corresponding password reset method, orcancel the setting directly without checking,
and the password reset function will not be enabled.
①、Security Question Configuration：
Check the <Security Question Configuration> option, Set the three security questions and answers.
The maximum length of the answer is 64 characters
②、Certificate of authorization：
Check the <Certificate of authorization> option,
Insert USB flash drive to your device
Click <Export> to export the secret key-certificate.txt
Save the file to a directory as you desire.
③、Super code(Not recommended)
The super code is a very insecure way to reset the password. According to the Mac of the camera
and the time prompted by the super verification code, the verification code can be calculated based on
certain rules. Byentering the verification code, the main user’s password can be modified.
4.2、Log-in
Log in the network camera via web browser shown as figure 4.2.1
Input the activated password
Choose the system language
Click <login> icon to enter into the device
Figure 4.1.2
Figure4.2.1

User Manual
10
4.3、Reset Password
After the device is activated, you should properly keep the password. When you forget the password,
there are three methods to reset. Atthe first access, you have to configure at least one password
resetting method. For details please refer to section 4.2- <Log in>
4.3.1、Security Question Configuration
Go to the <Recover password> menu
On the user login interface, Click <Recover Password>
Select the <Security Question Configuration>
Select the three Security questions and input their correct answers
Create a new admin password
Click <OK>
4.3.2、Certificate of Authorization
On the user login interface, Click <Recover Password>
Select the <Certificate of Authorization>
Click <Import> to upload the key file
After successful import, create a new admin password
Click <OK>
Figure 4.3.1
Figure 4.3.2

User Manual
11
4.3.3、Super Code
On the user login interface, Click <Recover Password>
Select the <Super Code> option
Calculate one super code through a <Super code> tool
Input the <Super Code>
create a new admin password
Click <OK>
4.4、Password Expired
we recommend you change your password regularly, especially in the high security system. In order
to better protect your products, System will record the system time you modified password. When the
time reach 90 days,system will prompt tomodify the password, The modification steps as follows.
Go to <Password>
Input the old password and click <Next>
Input one new password and confirm the new one again
Click <Ok>
1、Input the system time
2、Input the Mac address of Device
3、Click <Generate>
Then you will get a 6-digital code.
Figure 4.3.3
Figure 4.4.1

User Manual
12
5、Plug-in Installation
Use IE browser to log in, you need to install the plug-in to preview the image normally. When the
prompt in Figure 5.1.1 appears, please download and install the plug-in according to the prompt.
Note: Programs without plug-ins are supported. When using Safari 12 and above, Chrome57 and
above, Firefox 52 and above, Edge 41 and other browsers for web access, the plug-in installation steps
can be ignored.
6、Preview
6.1、Live
After successful log-in, We will enter into the <Live> mode shown as Figture 6.1.1
Note: The supported functions vary depending on the actual model.
Code stream switching menu: the upper left corner can switch the image quality of the current
preview interface:
Main stream: The image is clearer, but the stream bandwidth is large, which requires higher
performance on the PC-side interface
Sub stream: Bandwidth and requirements for the PC are moderate, but the image will be worse than
Figure 5.1.1

User Manual
13
the main stream.
Mobile stream: The bandwidth and requirements for the PC are the lowest, but the image is also the worst.
Main menu switching bar: Switch the function interface of the web. The web terminal has 4 menus:
Live, Playback, Remote Setting, and Local Settings.
Info: Display the currently logged-in user, web version and plug-in version.
AI alarm: Open the alarm push bar on the right, and push the corresponding picture when
performing functions such as face alarm, human and vehicle detection.
Color: Adjust the current image settings, such as image saturation, sharpness, etc.
PTZ Setting: Open the pan/tilt operation setting and re-adjust the focus of camera.
Exit: Exit the current login
Recording alarm status: Prompt the alarm and recording status of camera, please refer to section
6.2 for details
Stop/Play: Open and close the current stream preview
Original Proportions: Display the current preview image in original proportions
Stretch: Display the current preview image in a way that fills the display area
Full Screen: Display the current preview screen in full screen, you can double-click the screen to
turn on/off the function, and press Esc to exit the full screen when enabling the function
Record: Manually record the stream of current preview
Capture: Manually capture the picture of the current stream
Digital Zoom：It helps to see a detailed information of any region in the image.
Audio：Enable/disable and adjust the sound in current preview.
Voice Intercom：Talk to the camera
Warning Light：Manually turn on/off the white light
Siren：Manually turn on/off siren
Pixel Counter：Select the area by frame to check the pixel size of the area in the code stream.
When some alarms are triggered, the lower right corner will prompt the current alarm
6.2、Recording Status
The recording status is a simple reminder from the web to the current alarm of the camera, which
can show whether the recording is normal. There can be multiple alarms at the same time. For specific
instructions, please refer to the following introduction:
No icon: The SD card of camera is normal, but no video is being recorded.
：The camera is performing general recording.
Note: When one camera performs alarm recording, the mark will disappear, but general recording
will continue.
：The SD card is in an abnormal state, please check the SD card.
：The camera is in motion alarm, but motion alarm recording is not enabled.
：The camera is in motion alarm, and motion alarm recording is performing.
：The camera is in IO alarm, but IO alarm recording is not enabled.
：The camera is in IO alarm, and IO alarm recording is performing.
：The camera is in PIR alarm, but PIR alarm recording is not enabled.
：The camera is in PIR alarm, and PIR alarm recording is performing.
：The camera is in smart alarm, but the smart alarm recording is not performed.
Note: Intelligent alarms include Face alarm, Human & Vehicle alarm, etc.
：The camera is in smart alarm and smart alarm recording is performing.

User Manual
14
7、Playback
The camera not only needs to allow us to see the real-time image, but also needs to save the image
information so that it can be retrieved and viewed when needed.
7.1、General Playback
The playback function is mainly composed of General video search and AI search functions. The
following figure shows the video search.
Search Mode: Switch the current search mode. As shown in the figure above, the default is General
search, and the search information is ordinary video files. You can switch to AI search.
Search date: Set the date to search for the video, click search, itwill prompt the date of the video file.
Search Type: Display the search type supported by the camera. You can search and view part of
the video according to your demand.
Search: Search and display the videos in the SD card according to the search settings.
Pause/Play：Pause/Play playback stream
Stop：Close the playback stream
Forward by One Frame：Play one frame of image every time you click
Record：Manually record the current preview stream
Capture：Manually capture the picture of the current stream
Download：Download the currently searched video
speed：Playing speed. Support speed adjustment like 1/8, 1/4, 1/2, 1, X2, X4, X8
Audio：Enable/disable, adjust the sound of playback stream
The below time bar shows the currentplayback progress in different colors according to the search results.
Digital Zoom：It helps to see a detailed information of any region in the image.
Original Proportions：Refer to original ratio window size.
Stretch：Stretch the current preview images to the whole display area.
Full Screen：Refer to the current preview images in full screen. Double-click the screen to turn
on/off the function, and press <Esc> to exit the mode when enabling the function.
Playback progress bar
The progress bar defaults to display the progress of 24 hours.
You can more accurately jump to the corresponding playback position through zoom in/out.
Scroll the mouse wheel to zoom in/out the progress bar to accurately jump to proper position

User Manual
15
7.2、Picture Search
Click <Playback> menu
Set Search condition, such as type, date and time etc. and click <Search>
The matched video files show in the search results display area.
When camera enable <auto-capture> function, you can search and play these pictures auto
captured.
1、Search Mode：Switch the search mode.
2、Date: Set the date of Searched picture. Click search and you will be prompted with the date of
the video file.
3、Time: Set the start and end time of searching pictures to facilitate users to search pictures in
specific time periods.
4、Search Type: select <Search Type>, options include <All type>, <Normal>, <Event>
5、Click <Search>
6、Search Results Display Area：Display the search results. Double-click the picture to enter the
playback for a short period of time before and after the detection.
7、Search results Flip：You can flip the search results in the lower right corner.
7.3、Tag Playback
This interface can view all the tags added before, and allow you edit, playback or delete them.
1、Select <Tag>
2、Set <Start time> you desired
3、Set <end time> you desired
4、Input the <Keyword> to search
5、Click <Search> to start to search
6、Display all the tags you desired in the
<Search display area>
Click< > icon to start the event playback
Click < >icon to modify the event name
Click <Save> and popup the window with
“Modify Success” prompt
Click < > icon to delete the event
7、Click the <Search Result Flip> to turn to next page.

User Manual
16
7.4、Smart AI
Log in with a plug-in free browser to playback smart AI. Refer to below Figure
The blue in the processing bar stand for the alarm triggered by human.
1、Select <Smart> option
2、Select the <date> you desire to search, and click search and you will be prompted with the date
of the video file.
3、Set the <search time> to facilitate user search.
4、Check the <search type> you desired
5、Click <Search>
6、Display all the search results in the <Search result area>.
<Pause/Play>：Pause or playback the images in the area.
<Stop>：stop the playback
<Capture>：Manually capture the 手动截取当前码流的图片
<speed>：Playing speed. Support 1/8, 1/4, 1/2, 1, X2, X4, X8 and X16 speed adjustment
<Audio>：Enable/disable, adjust the sound of playback stream
<Add Default Tag>: Click the icon to add default Tag
<Add Tag>: Click the icon to add a customized tag
<Smart>: click to enter into the Smart area configuration menu
: Click <All> to select all the screen as detect area.
Click <Delete> to clear the whole area:
Click <Digital Zoom> to zoom in/out the images In a specific area：
Turn to <Original Proportions> mode：
Turn to <Stretch> mode
Turn to the <Full Screen> mode. You can double-click the screen to turn on/off the function, and
press Esc to exit the full screen when enabling the function

User Manual
17
7.5、AI
7.5.1、Face Detection
The camera performs face recognition function, stores the captured face images to the TF card, and
saves the image related information at the same time. During the search, you can quickly retrieve the
face capture that meets the user's requirements as needed, and quickly locate the video according to the
capture. The face search playback interface is shown in the figure below.
Go to <PlaybackAI> interface
Select <Face detection> option
Set the <Start time> of searching for face capturing
Set the <End time> of searching for face capturing
Alarm Group：When capturing a face picture, the camera matches the picture to the corresponding
combination according to the settings of the face database which include <Allow list>, <Black list> and
<Stranger>.
Check the <Alarm Group> option, now you can search the images you desired.
Click <Search>
Click <Add> to add one picture to display for comparison purpose. You can add local images or
captured images here.
Click <Delete> to delete the images in the display area.
Click <Compare>
Display area of Adding images: will display the image which is added and is use for comparison.
Display area of Searching images: will display the searched face snapshot according to Search and
Comparison result. Double-click the images to playback the video which was recorded before and after
the detection.
7.5.2、Human & Vehicle Detection
The camera can distinguish people or cars, and record them according to the configured parameters,
which can be used to search for the required records.
Go to <PlaybackAI> interface
Select <Human & Vehicle detection> option
Set the <Start time> of searching for human & Vehicle capturing
Set the <End time> of searching for human & Vehicle capturing
Select <Detection Type>, herein allow you select <Human> <Motor Vehicle> and <Non-motorized

User Manual
18
Vehicle> (Note: Non-motorized Vehicle refer to the bike, motor-bicycle & electric bicycle.)
Click <Search> to search for the human & vehicle snapshot.
Display area of Searching images: will display the searched face snapshot according to Search and
Comparison result. Double-click the images to playback the video which was recorded before and after
the detection.
Click <Turn Pages> icon on the lower-right corner to turn to next page or previous page
7.5.3、PID&LCD
PID&LCD can not only alarm the target entering the warning area, but also add the function of
human-shaped vehicle shape detection, only alarm the target of people or vehicles, and record the
picture or video information for search and preview purpose.
Go to <PlaybackAI> interface
Select <PID&LCD> option
Set the <Start time> of searching for human & Vehicle capturing
Set the <End time> of searching for human & Vehicle capturing
Vigilance: Set the capture method to trigger the alarm as <PID>, <LCD> or <PID and LCD>
Select <Detection Type>, herein allow you select <Human> <Motor Vehicle> and <Non-motorized
Vehicle> (Note: Non-motorized Vehicle refer to the bike, motor-bicycle & electric bicycle.)
Click <Search> to search for the human & vehicle snapshot.
Display area of Searching images: will display the searched face snapshot according to Search and
Comparison result. Double-click the images to playback the video which was recorded before and after
the detection.
Click <Turn Pages> icon on the lower-right corner to turn to next page or previous page
7.5.4、Repeat Customer
The <repeat customer> function will allow you find out whether customers stop by the products in
this area, or monitor whether suspicious targets frequently appear in a certain area
Go to <PlaybackAI> interface
Select <Repeat Customer> option
Set the <Start time> of searching for human & Vehicle capturing

User Manual
19
Set the <End time> of searching for human & Vehicle capturing
Set the <minimum time interval> between two snapshots of the same target during search to
increase its accuracy
Similarity: allow you set the minimum similarity value to other reference pictures when matching and
comparing repeat customers.
Note: This configuration only takes effect when the current function does not check <Group>
Face Attribute：Recognize the detected face capturing eigenvalues, including age, gender, mask,
glasses, expression and other attributes.
Alarm Group：Filter search images based on facial eigenvalues.
Note: Do not set <Group> limit, check <All> option, and the similarity setting will take effect at this
time.
Click <Search> to search for face capturing images
Minimum number of occurrences：Filter search results based on the number of occurrences
Sort Type：Sort the search results by time or number of shots and allow you set Ascending and
Descending sorting.
Click <Refresh> to refresh the search result based on < Minimum number of occurrences> and <Sort
Type>.
The result will display the <Secondary display area of search results>. In the display area, system
will display the snapshot of the selected target in the form of event list. Click the <play> button to switch
to the corresponding fast playback.
7.5.5、Face Attendance
The <Face Attendance> function allows the staff clock on and off by face. And the face attendance
data can be exported as a file and sent to the specified email address according to the schedule setting.
Go to <PlaybackAI> interface
Select <Face Attendance> option
Set the <Search Time Mode>, you can select <Day>, <Week>, <Month>, <Customize> and <Today>
options
If you select <day>, the end date and start date will be synchronized automatically; Selecting <week>
will automatically change the start date and end date into Monday and Sunday of the week in which the
selected date is located;
Selecting <Month> change the start date and end date into the firstand last day of the month in
which the selected date is located;
Select <customize> allow you customize the search date;
Selecting <today> will automatically change the start date and end date into the current day
Set the <Start time> of searching for Face Attendance
Set the <End time> of searching for Face Attendance
Select <Import Type>, you can choose <By Group> or <By Face> option as <Import Type>
<By Group>: Take all personnel in all the groups as the detection object and search the matching
results
<By Face>: Select people in a group to search for matching results
Alarm Group：When selecting <by group>, we can search for face attendance results according to