
6/7 energysistem.com
Bluetooth pairing
Switch on your Earphones FE 2 True Wireless. At this point, the LED status indicator (3) on both earbuds flashes red and
blue and both units pair automatically. Select Earphones FE 2 True Wireless from the list of Bluetooth devices on your
smartphone or Bluetooth music player and press ?connect?. Both devices will be connected immediately and without
codes. The right earbud will emit a confirmation sound when the devices are paired. At this point, the LED status
indicator (3) flashes blue.
If you previously paired the earbuds with a device, there is no need to repeat the pairing process. Just enable Bluetooth
on your music player and switch on your Earphones FE 2 True Wireless. They will sync with it automatically.
Playback control
Play/Pause
Double tap the Left multifunction button (2) or Right multifunction button (1) to pause or resume playback.
Volume +/Volume -
Tap the Right multifunction button (1) or Left multifunction button (2) to turn up or down the volume.
Skipping to the next or previous track
Tap and hold the Right multifunction button (1) or Left multifunction button (2) for 2 seconds to skip to the next or
previous track during music playback.
Call control
Once the Earphones FE 2 True Wireless and your smartphone are synchronized, you can control calls from the
earphones.
Answering/Ending a call
To answer an incoming call, tap the Right multifunction button (1) or Left multifunction button (2) once. Double tap the
same button to hang up.
Using the Voice Assistant feature
You can interact with your smartphone voice assistant using your Earphones FE 2 True Wireless. To do so, tap the Left
multifunction button (2) 3 times in a row. You can give the voice command after hearing the confirmation sound.
Charging the battery
Earphones
When the battery level of your Earphones FE 2 True Wireless is below 10%, you will hear a low battery warning sound.
To charge the earphones? battery, put the earbuds back in the charging case. The earphones LED status indicator (3)
lights up red and switches off once the charging process is complete.
Charging case
When the battery level of the charging case is below 10%, the first LED of the Charging indicator (charging case) (4)
starts flashing. Plug the micro USB end of the provided cable into the Micro USB charging port (5), and the other end
into a 5 V USB charging device. The LEDs of the Charging indicator (charging case) (4) light up as the battery charges.
Once the charging process is complete, all LEDs will glow.
Note: We recommend not to leave neither your Earphones FE 2 True Wireless nor your charging case unused for long
periods of time with an empty battery. We advise to charge the battery at least once a month.
Warranty
You can check the warranty terms here:
https://www.energysistem.com/terms-warranty