
6/7 energysistem.com
Main functions
Switching on and off the device
Plug the 3.5 mm jack audio cable into your PC or console to start using your Earphones ESG 1 Dual Driver. If your source
device features two separate audio and microphone connections, you can use a 2 male to 1 female mini jack adapter.
Other functions
Make the most of your gaming experience using the buttons below.
Press Play/Pause (1) to play/pause playback.
Press Microphone On/Off (1) to switch on or off the microphone.
Press Volume +/Volume - (3) to set the desired volume level.
Note: We recommend leaving a distance of approximately 5 cm between lips and microphone to ensure optimal
performance.
Safety
Before using the earphones, turn the volume down and slowly turn it up until you set an appropriate volume
level.
Avoid noisy environments that force you to turn up the volume really high when using your earphones.
Listening to loud music over a long period of time may cause your ears to get used to high volume levels,
resulting in irreversible hearing loss.
Adjust the volume of your earphones to hear important external sounds.
Warranty
You can check the warranty terms here
Declaration of conformity
Issuer's name: Energy Sistem Technology, S.A. - CIF: A53107488
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
We declare under our own exclusive responsibility that the product
Description: Earphones
Brand: Energy Sistem
Model: Earphones ESG 1 Dual Driver
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration is in compliance with the essential norms and standards
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62368:2014/AC:2015
in conformity with the provisions of the Directive 2014/30/EU of the European Parliament and the Council of 29th March
2014.
Finestrat, 1st September 2019