6/8 energysistem.com
Switching on and off the device
To switch on your Studio Plus/Power Radio Headphones, press and hold the Multifunction button (2) for 2 seconds.
You will hear a confirmation sound and the LED indicator (6) will light up white. The LED indicator (6) keeps flashing
white while the headphones are on. Press and hold the Multifunction button (2) for 2 seconds to switch off the
headphones. You will hear a sound when you switch them off.
Auto power off
To optimise battery life, your headphones turn off automatically after 5 minutes in Bluetooth® search mode, if not
synchronised with any other device.
Charging the battery
When the battery level is below 10%, the LED indicator (6) starts flashing red. When the battery level is below 2%,
you will hear a sound to remind you to charge it.
The LED indicator (6) lights up red while charging the device and turns off once the charging process is complete. To
charge the battery, plug the USB Type-C end of the provided USB cable to your headphones' USB Type-C charging
port (7) and the other USB end to any device with a USB charging port (PC, USB wall charger, car charger, etc.). The
charging time is approximately 2 hours.
Note:
To optimise battery life, do not store or leave the device completely discharged for a long time.
Caution: Do not charge your headphones with fast charging adapters or dedicated laptop charging adapters, Because
their output voltage exceeds 5V and the device may become unusable.
Bluetooth® wireless connection
Press and hold the Multifunction button (2) for 2 seconds, until the LED indicator (6) starts flashing white. Your
headphones are now ready to be paired with your Bluetooth device. Once Studio Plus/Power Radio Headphones appears
on your source devide screen, press "connect". You will hear a confirmation sound when both devices are paired.
Once your devices are synchronised, you can control basic playback functions such as turning up/down the volume and
skipping to the next or previous track directly from your headphones.
Press Volume + / Next (1) to turn up the volume or Volume - / Back (3) to turn it down. You will hear a sound when
reaching the maximum volume level.
Press and hold Volume + / Next (1) to skip to the next song. You can also press and hold Volume - / Back (3) to skip
to the previous track.
Press the Multifunction button (2) once to pause or resume playback.
Note: If you're using the audio cable instead of the Bluetooth wireless connection, you will have to control music
playback from your music player and not from the headphones.
FM radio
Press Change function (4) and select radio mode. Press and hold Change function (4) once again to start searching
for FM radio stations. The process may take a few minutes. Once the search has been completed, press and hold
Volume + / Next (1) or Volume - / Back (3) to select the radio station you want to hear from all saved radio stations.
Your Studio Plus/Power Radio Headphones save the last selected radio station when you turn them off. This way you will
