EnGenius EOC-3220 User manual

11g Wireless Outdoor
Client Bridge/AP
User’s Manual
Version: 1.36

11g Wireless Outdoor Client Bridge/AP Version 1.36
2
Table of Contents
11g Wireless Outdoor Client Bridge/AP................................................................................................... 1
1INTRODUCTION............................................................................................................................... 5
1.1 FEATURES &BENEFITS ................................................................................................................ 5
1.2 PACKAGE CONTENTS ................................................................................................................... 6
1.3 OUTDOOR UNIT DESCRIPTION...................................................................................................... 6
1.4 SYSTEM REQUIREMENTS.............................................................................................................. 6
1.5 APPLICATIONS.............................................................................................................................. 7
1.6 NETWORK CONFIGURATION......................................................................................................... 7
a) Ad-hoc (peer-to-peer) Mode................................................................................................................... 8
b) Infrastructure Mode................................................................................................................................ 8
2UNDERSTANDING THE HARDWARE.........................................................................................10
2.1 HARDWARE INSTALLATION.........................................................................................................10
2.2 IP ADDRESS CONFIGURATION.....................................................................................................10
3SWITCH BETWEEN BRIDGE/ BRIDGE ROUTER/ AP ............................................................12
3.1 BRIDGE/BRIDGE ROUTER TO ACCESS POINT...............................................................................12
3.2 ACCESS POINT TO BRIDGE/BRIDGE ROUTER...............................................................................13
4BRIDGE MODE – WEB CONFIGURATION................................................................................14
4.1 LOGGING IN................................................................................................................................14
4.2 MANAGEMENT ............................................................................................................................15
4.2.1 OPERATION MODE ......................................................................................................................15
4.2.2 STATUS .......................................................................................................................................17
4.2.3 STATISTICS..................................................................................................................................18
4.2.4 LOG.............................................................................................................................................18
4.2.5 UPGRADE FIRMWARE..................................................................................................................19
4.2.6 SAVE /RELOAD SETTINGS,RESET TO DEFAULT..........................................................................19
4.2.7 PASSWORD..................................................................................................................................20
4.3 TCP/IP SETTINGS........................................................................................................................21
4.3.1 LAN INTERFACE .........................................................................................................................21
4.4 WIRELESS ...................................................................................................................................22
4.4.1 BASIC SETTINGS (INFRASTRUCTURE,ADHOC) ............................................................................22
4.4.2 ADVANCED SETTINGS (INFRASTRUCTURE,ADHOC)....................................................................23
4.4.3 SECURITY....................................................................................................................................25
4.4.3.1 ENCRYPTION DISABLED .........................................................................................................25
4.4.3.2 WEP 64-BIT /128-BIT ............................................................................................................26
4.4.3.3 WPA /WPA2 PASSPHRASE....................................................................................................27
4.4.3.4 WPA /WPA2 RADIUS AUTHENTICATION............................................................................28
4.4.4 SITE SURVEY...............................................................................................................................29
5ACCESS POINT MODE – WEB CONFIGURATION ..................................................................30
5.1 LOGGING IN................................................................................................................................30
5.2 MANAGEMENT ............................................................................................................................31
5.2.1 OPERATION MODE ......................................................................................................................31
5.2.2 STATUS .......................................................................................................................................32
5.2.3 STATISTICS..................................................................................................................................34
5.2.4 LOG.............................................................................................................................................34
5.2.5 UPGRADE FIRMWARE..................................................................................................................35
5.2.6 SAVE /RELOAD SETTINGS,RESET TO DEFAULT..........................................................................35
5.2.7 PASSWORD..................................................................................................................................36
5.3 TCP/IP SETTINGS........................................................................................................................36
5.3.1 LAN INTERFACE .........................................................................................................................36

11g Wireless Outdoor Client Bridge/AP Version 1.36
3
5.3.1.1 STATIC IP ADDRESS ...............................................................................................................37
5.3.1.2 DHCP CLIENT........................................................................................................................38
5.3.1.3 DHCP SERVER.......................................................................................................................39
5.4 WIRELESS ...................................................................................................................................40
5.4.1 BASIC SETTINGS..........................................................................................................................41
5.4.2 ADVANCED SETTINGS .................................................................................................................41
5.4.3 SECURITY....................................................................................................................................43
5.4.3.1 ENCRYPTION DISABLED .........................................................................................................44
5.4.3.2 WEP 64-BIT /128-BIT ............................................................................................................45
5.4.3.3 WPA /WPA2 /WPA2 MIXED PASSPHRASE ..........................................................................46
5.4.3.4 WPA /WPA2 /WPA2 MIXED RADIUS AUTHENTICATION ..................................................47
5.4.4 ACCESS CONTROL.......................................................................................................................48
5.4.5 WDS...........................................................................................................................................49
APPENDIX A – SPECIFICATIONS .........................................................................................................51
APPENDIX B – FCC INTERFERENCE STATEMENT.........................................................................52

11g Wireless Outdoor Client Bridge/AP Version 1.36
4
Revision History
Version Date Notes
1.36 April 26, 2006

11g Wireless Outdoor Client Bridge/AP Version 1.36
5
1 Introduction
The Outdoor Wireless Client Bridge/Access Point/WDS (wireless distribution system)
operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b
(2.4GHz, 11Mbps) and faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the
best way to add wireless capability to your existing wired network, or to add
bandwidth to your wireless installation.
NOC-3220 has high transmitted output power and high receivable sensitivity. High
output power and high sensitivity can extend range and coverage to reduce the
roaming between APs to get more stability wireless connection. It also can reduce
the expense of equipment in the same environment.
To protect your wireless connectivity, it can encrypt all wireless transmissions
through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC
address filter lets you select exactly which stations should have access to your
network.
This chapter describes the features & benefits, package contents, applications, and
network configuration.
1.1 Features & Benefits
Features Benefits
High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads
such as MPEG video streaming
High Output Power and High Sensitivity Spreads the operation distance and reduce
the roaming betweenAPs to get more stability
wireless connection
Point-to-point, Point-to-multipoint
Wireless Connectivity Let users transfer data between two buildings or multiple buildings
WPA2/WPA/ IEEE 802.1x Authenticator
support More Powerful data security
WDS (Wireless Distribution System) Make wirelessAP and Bridge mode
simultaneously as a wireless repeater
Watertight and Weatherproof Avoid water invaded and weather corroded
Wide temperature range and robust
mechanical design Delivers reliable, top performance in the most demanding environments
MAC address filtering (AP Mode) Ensures secure network connection
Power-over-Ethernet (IEEE802.3af
Compliant) Flexible Access Point locations and cost savings

11g Wireless Outdoor Client Bridge/AP Version 1.36
6
1.2 Package Contents
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be
shipped in its original package.
hOne Outdoor Wireless Client Bridge unit
h48V, 0.375A AC/DC adapter with wall-plug power cable
hInline Power Injector (PoE)
h1.8m Grounding Cable
hUser’s manual CD-ROM
hWall mounting kit
hMast mounting kit
hWaterproof kit
1.3 Outdoor Unit Description
1.4 System Requirements
The following are the minimum system requirements in order configure the
device.
hPC/AT compatible computer with an Ethernet interface.
hOperating system that supports HTTP web-browser
Outdoor Unit with built-in
antenna
Ethernet cable
External Antenna
Connector (Optional)

11g Wireless Outdoor Client Bridge/AP Version 1.36
7
1.5 Applications
The wireless LAN products are easy to install and highly efficient. The following list
describes some of the many applications made possible through the power and
flexibility of wireless LANs:
a) Difficult-to-wire environments
There are many situations where wires cannot be laid easily. Historic
buildings, older buildings, open areas and across busy streets make the
installation of LANs either impossible or very expensive.
b) Temporary workgroups
Consider situations in parks, athletic arenas, exhibition centers, disaster-
recovery, temporary offices and construction sites where one wants a
temporary WLAN established and removed.
c) The ability to access real-time information
Doctors/nurses, point-of-sale employees, and warehouse workers can
access real-time information while dealing with patients, serving
customers and processing information.
d) Frequently changed environments
Show rooms, meeting rooms, retail stores, and manufacturing sites where
frequently rearrange the workplace.
e) Small Office and Home Office (SOHO) networks
SOHO users need a cost-effective, easy and quick installation of a small
network.
f) Wireless extensions to Ethernet networks
Network managers in dynamic environments can minimize the overhead
caused by moves, extensions to networks, and other changes with
wireless LANs.
g) Wired LAN backup
Network managers implement wireless LANs to provide backup for
mission-critical applications running on wired networks.
h) Training/Educational facilities
Training sites at corporations and students at universities use wireless
connectivity to ease access to information, information exchanges, and
learning.
1.6 Network Configuration
To better understand how the wireless LAN products work together to create a
wireless network, it might be helpful to depict a few of the possible wireless LAN PC
card network configurations. The wireless LAN products can be configured as:
a) Ad-hoc (or peer-to-peer) for departmental or SOHO LANs.
b) Infrastructure for enterprise LANs.

11g Wireless Outdoor Client Bridge/AP Version 1.36
8
a) Ad-hoc (peer-to-peer) Mode
This is the simplest network configuration with several computers
equipped with the PC Cards that form a wireless network whenever they
are within range of one another. In ad-hoc mode, each client is peer-to-
peer, would only have access to the resources of the other client and
does not require an access point. This is the easiest and least expensive
way for the SOHO to set up a wireless network. The image below depicts
a network in ad-hoc mode.
b) Infrastructure Mode
The infrastructure mode requires the use of an access point (AP). In this
mode, all wireless communication between two computers has to be via
the AP. It doesn’t matter if the AP is stand-alone or wired to an Ethernet
network. If used in stand-alone, the AP can extend the range of
independent wireless LANs by acting as a repeater, which effectively
doubles the distance between wireless stations. The image below
depicts a network in infrastructure mode.

11g Wireless Outdoor Client Bridge/AP Version 1.36
9

11g Wireless Outdoor Client Bridge/AP Version 1.36
10
2 Understanding the Hardware
2.1 Hardware Installation
1. Place the outdoor unit in an appropriate pace using the mounting kit.
2. Run the Ethernet cable indoors and plug it into the PoE injector port labeled
“AP/Router”.
3. Plug one end of another Ethernet cable into your PC/Notebook and the other end
into the PoE injector port labeled “Network”.
4. Insert the DC-inlet of the power adapter into the PoE injector port labeled
“DC240V” and the other end into the power socket on the wall.
This diagram depicts the hardware configuration
2.2 IP Address Configuration
This device can be configured as a Bridge or Access Point. The default IP address
of the device is 192.168.1.1. In order to log into this device, you must first configure
the TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network Connections and then double click on
the connection of your Network Interface Card (NIC). You will then see the
following screen.
Outdoor UnitPoE In
j
ectorPC
Power Outlet
Ethernet Ethernet
AC/DC cable

11g Wireless Outdoor Client Bridge/AP Version 1.36
11
2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This
will allow you to configure the TCP/IP settings of your PC/Notebook.
3. Select Use the following IP Address radio button and then enter the IP address
and subnet mask. Ensure that the IP address and subnet mask are on the same
subnet as the device.
For Example: Device IP address: 192.168.1.1
PC IP address: 192.168.1.10
PC subnet mask: 255.255.255.0
4. Click on the OK button to close this window, and once again to close LAN
properties window.

11g Wireless Outdoor Client Bridge/AP Version 1.36
12
3 Switch between Bridge/ Bridge Router/
AP
This device can be configured as a Bridge or Access Point. The default IP address
of the device is 192.168.1.1 in Bridge mode. This chapter will describe the steps to
switch from Bridge to Access Point and Access Point to Bridge.
3.1 Bridge/Bridge Router to Access Point
1 Enter the default IP address (192.168.1.1) of the bridge into the address bar of
the web-browser.
2 By default, a user name and password has not been configured. If you have
configured a user name and password, please enter them into the field to
continue
3 Once you have logged in, click on the Operation Mode link under the
Management menu.
4 Since this device is currently in Bridge mode, the Bridge radio button will be
selected by default.
5 Select the AP radio button to and then click on the Apply Change to switch the
operation mode to Access Point.
6 Wait for about 1 minute and the device will automatically restart into Access
Point mode.

11g Wireless Outdoor Client Bridge/AP Version 1.36
13
3.2 Access Point to Bridge/Bridge Router
1 Enter the default IP address (192.168.1.2) of the bridge into the address bar of
the web-browser.
2 By default, a user name and password has not been configured. If you have
configured a user name and password, please enter them into the field to
continue
3 Once you have logged in, click on the Operation Mode link under the
Management menu.
4 Since this device is currently in Access Point mode, the AP radio button will be
selected by default.
5 Select the Bridge or Bridge Router radio button to and then click on the Apply
Change to switch the operation mode to Bridge.
6 Wait for about 1 minute and the device will automatically restart into Bridge
mode.

11g Wireless Outdoor Client Bridge/AP Version 1.36
14
4 Bridge Mode – Web Configuration
4.1 Logging In
To configure the Bridge through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the Bridge and your computers are on the same subnet. Refer to
Chapter 2 in order to configure the IP address of your computer.
Username：admin; Password：admin
After logging in you will graphical user interface (GUI) of the bridge. The navigation
drop-down menu on left is divided into three main sections:
1. Management: This includes operation mode, status, statistics, logs, upgrade
firmware, save/reload settings, and password.
2. TCP/IP Settings: This includes the configuration of the LAN port and settings for
the LAN IP, subnet mask, DHCP client, spanning tree and MAC cloning.
3. Wireless: This includes the basic, advanced, security and site-survey settings for
the wireless interface.
The Bridge status page is also displayed once you have logged in. This includes
details about the system, wireless, and TCP/IP configuration.

11g Wireless Outdoor Client Bridge/AP Version 1.36
15
System
oUptime: Duration of time since the device was last reset.
oFirmware version: Version of the firmware that is currently loaded on the
device.
Wireless Configuration:
oMode: Wireless configuration mode such as client bridge, AP, or WDS.
oBand: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
oSSID: The name used to identify the wireless network.
oChannel Number: The channel used to communicate on the wireless
network.
oEncryption: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
oBSSID: The MAC address of the SSID.
oState: The current state of the bridge. It may be scanning or associated or
disabled.
TCP/IP Configuration:
oAttain IP Protocol: The IP address setting may be fixed or static.
oIP Address: Displays the current IP address of the LAN port.
oSubnet Mask: Displays the current subnet mask for the IP address.
oDefault Gateway: Displays the default gateway for the device.
oDHCP: Displays the DHCP setting.
oMAC Address: Displays the MAC address of the device.
4.2 Management
Click on the Management link on the navigation
drop-down menu. You will then see five options:
operation mode, status, statistics, log, upgrade
firmware, save/reload settings, and password.
Each option is described below.
4.2.1 Operation Mode
Click on the Operation Mode link under the Management menu. The Operation
Mode allows you to switch from Client Bridge to Access Point mode.

11g Wireless Outdoor Client Bridge/AP Version 1.36
16
Select the AP,Bridge or Bridge Router and then click on the Apply Change button.
Wait for about a minute until you see the following Pop-Up message.
Click on the OK button and then enter the specified IP address into the web-browser.
**Switch to other mode, the configuration settings will continue using.**
Refer to Chapter 5 to learn how to configure this device in Access Point mode.

11g Wireless Outdoor Client Bridge/AP Version 1.36
17
4.2.2 Status
Click on the Status link under the Management menu. The Status page is the first
page that is displayed once you have logged in. This includes details about the
system, wireless, and TCP/IP configuration.
System
oUptime: Duration of time since the device was last reset.
oFirmware version: Version of the firmware that is currently loaded on the
device.
Wireless Configuration:
oMode: Wireless configuration mode such as client bridge, AP, or WDS.
oBand: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
oSSID: The name used to identify the wireless network.
oChannel Number: The channel used to communicate on the wireless
network.
oEncryption: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
oBSSID: The MAC address of the SSID.
oState: The current state of the bridge. It may be scanning or associated or
disabled.
TCP/IP Configuration:
oAttain IP Protocol: The IP address setting may be fixed or static.
oIP Address: Displays the current IP address of the LAN port.
oSubnet Mask: Displays the current subnet mask for the IP address.
oDefault Gateway: Displays the default gateway for the device.

11g Wireless Outdoor Client Bridge/AP Version 1.36
18
oDHCP: Displays the DHCP setting.
oMAC Address: Displays the MAC address of the device.
4.2.3 Statistics
Click on the Statistics link under the Management menu. This page displays the
number of sent and received packets on the Ethernet and Wireless interface.
Since the packet counter is not dynamic, you must click on the Refresh button for
the most recent statistics.
4.2.4 Log
Click on the Log link under the Management menu. The Log page displays a list of
events that are triggered on the Ethernet and Wireless interface. This log can be
referred when an unknown error occurs on the system or when a report needs to be
sent to the technical support department for debugging purposes.

11g Wireless Outdoor Client Bridge/AP Version 1.36
19
In order for the log to record all the events, you must first place a check in the
Enable Log or Enable Remote Log (Log Server required) check box.
Select system all or wireless depending on the type of events you want recorded.
Since the log is not dynamic, you must click on the Refresh button for the most
recent events, or click on the Clear button to clear the log.
4.2.5 Upgrade Firmware
Click on the Upgrade Firmware link under the Management menu. This page is
used to upgrade the firmware on the device. Make sure that downloaded the
appropriate firmware from your vendor.
Click on the Browse button and then select the appropriate firmware and then click
on the Upload button.
Note: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.
4.2.6 Save / Reload Settings, Reset to Default
Click on the Save / Reload Setting link under the Management menu. This option is
used to save the current settings of the device in a file on your local disk or load
settings on to the device from a local disk. This feature is very handy for
administrators who have several devices that need to be configured with the same
settings.
This page also allows you to reset the device to its factory default settings.

11g Wireless Outdoor Client Bridge/AP Version 1.36
20
Click on the Save button to save the current settings to a file on the local disk.
Click on the Browse button to select the settings file and then click on the Upload
button to load the previously saved settings.
Click on the Reset button to reset the device to its factory default settings. Click
Restart to reboot the device.
4.2.7 Password
Click on the Password link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured
without a user name and password. For security reasons it is highly recommended
that you create a user name and password.
Enter a user name into the first field.
Enter a password into the New Password field and then re-type the password into
the Confirmed Password field. Then click on the Apply Changes button.
By clicking on the Reset button, the user name and password fields will become
blank indicating that the username and password has been disabled.