ENM MT10 Series Instruction manual

ENM isproud to present the new seriesMT10 self-powered
Digital Hour Meter for electricmotors. The MT10 keepstrack of
true motor runningtime for all typesofAC or DC electric
motors. The unit ispowered by an internal lithium battery. No
external power connectionsare required.
The operation of the Hour meter istriggered byasensor attached
at the end of 4 ft.external cable. When placed on the motor,the
sensor sensesthe magneticfield throughthe motor casing.
Since the unit istriggered bythe motorsmagneticfield,the hours
displayactual operation. Thisisuseful for maintenance and
warrantyapplicationsfor any type ofAC or DC powered electric
motor. When the motor ison,the hoursicon will blink on/off
indicatinghour meter isactive.
With solid state technology the MT10 seriesisbuilt with a custom
chip and with solid construction for maximumdurabilityfor harsh
environmentsand rugged applications.
Specifications
Display Reading: 9999.9 Hours meter
Digit Height: 5-digits [8MM] LCD
Operating Voltage: Internal lithium battery
15,000 hours continuous running
Temperature: Standard -40C to +85C
(-40F to +185F)
Vibration Resistance: Withstands 10 to 75Hz @1 to 8 g’s
Mounting Configuration: Two hole base mount
Features
•Large 7 segment LCD display
•Low cost and small size
•No external power required
•No shunt required
•Solid state electronics
•Quartz crystal
•Wide operating temperature range
•High reliability
•Resettable, non reset version is available
•Easy to install
•Made in the U.S.A.
Self Powered AC/DC Electric Motor
Hour Meter, Series MT10
667
Technical Data
web site:www.enmco.com © ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
[phone] • Fax:[phone]
Toll Free [phone] • e-mail:[e-mail]
2004 ENM Co.®
MT10R
MT10

SERIES MT10
Dim ensional Data
667
© ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
[phone] • Fax:[phone] • Toll Free [phone]
e-mail:[e-mail]
ISO 9001:2008 Certified web site:www.enmco.com
LIMITED WARRANTY HOURMETERS
ENM Companyhour metersare warranted to the consumer to be free fromdefectsinmaterial and workmanshipfor aperiod of 1 year. All ENM productswhich fall withinthe warranty
perioddue to defectsinmaterial or workmanshipwill be repaired or replaced,at ENM’soption,without charge to the consumer whenreturned withproofofpurchase to anyauthorized
ENM dealer in the United States,transportationchargesprepaid,provided there isno evidence of improper installation,tampering,or other abuse. All implied warranties,includinganyimplied
warrantyof merchantabilityor fitnessfor aparticular purpose,shallbe limitedinduration to the expresswarrantyperiodspecifiedabove.ENM disclaimsanyliabilityfor consequential damages
due to breachof anywrittenor implied warrantyonitshour meter.Datasheet informationsubject to change.
2004 ENM Co.®
MT10
AC or DC Motor Application
ENM DESCRIPTION
MT101 Non-reset withENM logo
MT101R Reset withENM logo