Epson Continuous Ink Supply System User manual

ContinuousInkSupplySystem
for
Epson StylusPhoto R200/R210/R300/R310
InstallationInstruction
ForSTPrefilledVersion
WithAutoResetChips
ThisVersion oftheContinuousInkFlowSystemcomeswithPrefilledCartridgesand
AutoResetChips.You justneedtofilltheReservoirbottles and print!Thewhole
operationisveryeasy.It sreallyaneffectivetooltosaveyourmoney.

CISforEPSONstylusR200/R210/R300/R310Instruction
Thankyou forpurchasingSTContinuousInkSupplySystem.Weappreciate
yoursupportandwilltryourbesttomakeyourexperiencewithourproductsa
pleasantone.Printinghasbeen adifferentexperienceeversinceyou installed
STContinuousInkSupplysystemon yourownprinter.Justimagining being
abletoprint withoutregardtothe inklevelinthoseexpensivelittlecartridges.
Pleasetakeyourtimeinstalling STContinuousInkSupplysystem.Donot
removeyouroldcartridgeuntilyouhavethe STCISsystemprimed and readyto
install(topreventthedryingofheads).Inaddition,makesureyouaregetting
perfectnozzlechecks beforeinstallingthe STCISsystem.The STCISsystem
won t be abletoworkproperlyif thenozzlesarepreviouslyclogged.
Mostpeoplegetaperfectnozzlecheck thefirsttimeafterinstalling the ST
ContinuousInkSupplysystem;othersmayneed toruntwoorthree cleaning
cyclesorlet theprintersit forawhilebeforetheyget theperfect results.
1General Guide:
1)Components
ACISsystem1setB Airfilters6pcs C SupportArm1set
DRefill Kit6pcs E Instruction CD 1pc
2)Openingboxinspection
aCheck whetherall the accessoriesareready.
bCheck whetherthere'sthe leakageofthe CISS,whethersometubeshavebeen
separated fromthe CISS,whetherthereareairbubblesinthe tube(Ifthereexistsmore
than 20CMairspace, pleasekindlytocontactwiththe localdealer)
2Printertesting:
1)Check whetherthe printerisinnormalcondition,likemechanicalstatus,lubrication
statusetc.

2)Print testinglinestoensuretheprintinghead isgood condition.
3)Print picturestosee whethertheprintingimageisok.
3InstallationProcedures:
1)First step
PuttheCISSontheleftsidePulloutthesmallrubberplug Place4pcsofairfiltersinto
oftheprinter.Inthemeantimefromtheairholeasaboveairholes,thethickerside
placeallthetubesatcorrectpictureshown.isdownintotank.
position.
2）Secondstep: Removecartridge
Press theinkcartridgereplaceMovethecartridge-cartothe cartridgeUnplug thepower
button replaceposition
3)Thirdstep: Setupthe ContinuousInkSupplySystem
ReplacethespringoftheopenthecoverofcartridgetosomeInsertscrewdriverintotheplace
cartridge-car degree angle that joint coverandcartridge-car

CircumgyratescrewdreiverSeparatetheright sideofTakeoffthecoverof cartridge-car
deasilly cartridge-car
4)Fourthstep: Set uptheContinuousInkSupplySystem
Removeoriginalcartridge Insertourno-spongecartridgeClosethecoverforcartridge
intoprintercarefully
5)Fivethstep: FixSupportArm
TearoffthestickerFixthearmonthe25cmrightfarfromTearoffthesticker
you printer
FixthebalancearmTearoffthestickerofclampAttachedtheclamponyourprinter
and letitparallelwithprinter

6)Sixthstep: Install tubeline
InserttubellinethroughthearmFinished
7)SeventhStep:Adjust the tubeline
Adjustthetubeline,removetheMakesuretublinewill notmeetMakesurethelengh oftublineis
Cartridge-carbackandforthprinterwhenprinting enough toreachthefarleft andright
Too long twistPerfect
8)Eighthstep
Insterttheplug Turnonthepowerswitchcheck
wetherallthing isusual

9)Ninethstep: Nozzlecheck
Usual
Brokenline
入打印机喷嘴检查选项
Thenozzlecheck patternsareinbroken-line,mostlybecauseofsmall duskenteredintothenozzle,after
repeatedcleaning,ifthereisstillafewbroken line,plslettheprinterdon tworkabout1hour,thenprint
thenozzlecheck pattern,maybeit workswell.
4ResetProcedure:
Ifthe indicatorlightflashingwhen printing,ittellsthatyouneedtoresetthechiptofull
status.Pleaseturnoffyourprinterforabout30secondsandswitchitback on.Inkmeterbar
shall showfullink.Youcanstart printingasusual.
5Refill Ink:

Pleasepayattention totheinklevelinthereservoirs;ifthe inklevelisbelow1CMasthe
abovepictureshown, pleaseuserefill kitstofillinkintoReservoirbottles.Carefullypull out
the rubberplugsfromthe refillholes.(thereispossibilityof inkspattering.Becareful!)Refill
inkaccordingtothecolorinshortsupply. Thenputtherubberback.(Pleasekeeptheprinter
and the reservoirat the samehorizontallineduringthe process ofrefillingink.)
6.How toinstall thecoverofcartridge:
PlsfirstinstalltheleftsideofTheninstalltheotherside Adjustwellthejointposition
thecoverintocartridge-car
Press therightsideofcoverFinished
tomakeit installwell
7Attentionformaintenance:
Takeoutthe CISS including the innercartridgesand othercomponents.Then
removesupportarmfromprinter,and placethe originalcartridgesin.Please
inquirelocaldealerbeforesending tomaintenance.
Notice:
1.Pleasedon ttakeoutcartridge atrandomafterinstalling theCISsystem.

Keep the reservoirbottleson thesamelevelwiththe printer.
2.Trytokeep at least 1/2inchof inkinthe bottles, asyou don twanttorun out
of inkand drawairintothecartridge.
3. Don t placethe ReservoirBottleshigherorlowermuchthan the printer.
4.Tobeusedinadryplacebetween 15and 35degree.Avoidexposuretodirect
sunlight.
5.Don tputthe continuousinksupplysystemsreversedorleaningduring the
shipment. Pleasemakesureallthe inkfillingholesandVentilation holesare
closedtightlyduring the transportation. Otherwise, the inkshallleakout.
6. Don t swaythe cartridge frequently. It maycauseinkleakage.
7.Don tpull outthe connectorof cartridge anddon ttearoffadhesivetapeatthe
bottomof cartridge.
Warning:
1. Not drinkable; keepit outreachof children.
2.Avoidexposuretodirectsunshineanddon tkeepitinhighorfreezing
temperature.
3.Avoidcollision and fallendown.