Epson L3560 Series Instruction Manual

9 Raise the control panel, then press the power button to
turn on the product. The power light ashes.
Note: If an error code appears, turn o the product and check
that no protective material has been left inside the product.
10 Select your language.
Note: You can change this setting later using the product’s
control panel. For more information, see the online User’s Guide.
11 When an Epson Smart Panel setup message appears on
the LCD screen, select the option to continue setup.
12 When the message to see the Start Here sheet appears
on the LCD screen, press and hold the help button for
5 seconds.
13 Press the start button to start ink charging. Ink charging
takes about 11 minutes.
Note: When the power light stops ashing, ink charging is
complete. Once initial setup of the printer is complete, you can
top o the ink tanks with any remaining ink. See the online User’s
Guide for instructions.
Caution: Do not unplug or turn o the product, or open the
inner cover while the product is charging or you’ll waste ink.
Note: After some ink is used for charging, the rest is available for
printing.
14 Press the OK button to proceed with initial setup.
15 Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See “Load paper” on this sheet for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User’s Guide.
Caution: After setup, periodically inspect the ink levels to ensure they
do not fall below the lowest lines on the tanks. Prolonged use when
ink is below the lowest line could damage the product. See the online
User’s Guide for relling instructions.
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User’s
Guide.
1Unpack
Note: Do not open the ink bottles until you are ready to ll the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1 Remove all protective materials from the product.
2 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2Choose a setup method
The Epson Smart Panel®app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to
use a mobile device for
setup, skip to the “Fill ink
tanks” section.
To use your mobile device
for setup, continue to
step 1.
OR
1 Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2 Press the power button to turn on the product.
Note: Do not connect your product to your computer yet.
3 Launch the app and follow its instructions to set up your
product. If necessary, tap the +icon on the top right
corner of the app’s home screen, tap Start setting up,
and follow the instructions to set up your product.
For information on connecting your product to a computer,
using voice-activated printing, solving problems, or for details
on reaching Epson support, see the sections on the back of
this sheet.
3Fill ink tanks
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution: This product requires careful handling of ink. If ink spills,
wipe it o immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come o.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
will print fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1 Open the ink tank cover, then open the cap for the black
(BK) ink tank.
Note: Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2 Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution: Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3 Insert the ink bottle into the lling port.
Note: Do not force the bottle into position; each bottle is keyed
for each color.
4 Wait for the ink to ll the tank.
Do not squeeze the bottle or
allow it to contact any other
surface.
Note: Ink ows into the tank and
stops automatically when the ink
tank is lled to the upper line. If ink
does not ow from the bottle, lift and
reinsert the bottle.
5 When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap. If any ink remains in
the bottle, close the bottle and store it for later use.
Note: Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak.
6 Securely close the black ink tank cap.
7 Repeat the previous steps for the other colors.
8 Close the ink tank cover.
Start Here
L3560

9 Raise the control panel, then press the power button to
turn on the product. The power light ashes.
Note: If an error code appears, turn o the product and check
that no protective material has been left inside the product.
10 Select your language.
Note: You can change this setting later using the product’s
control panel. For more information, see the online User’s Guide.
11 When an Epson Smart Panel setup message appears on
the LCD screen, select the option to continue setup.
12 When the message to see the Start Here sheet appears
on the LCD screen, press and hold the help button for
5 seconds.
13 Press the start button to start ink charging. Ink charging
takes about 11 minutes.
Note: When the power light stops ashing, ink charging is
complete. Once initial setup of the printer is complete, you can
top o the ink tanks with any remaining ink. See the online User’s
Guide for instructions.
Caution: Do not unplug or turn o the product, or open the
inner cover while the product is charging or you’ll waste ink.
Note: After some ink is used for charging, the rest is available for
printing.
14 Press the OK button to proceed with initial setup.
15 Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See “Load paper” on this sheet for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User’s Guide.
Caution: After setup, periodically inspect the ink levels to ensure they
do not fall below the lowest lines on the tanks. Prolonged use when
ink is below the lowest line could damage the product. See the online
User’s Guide for relling instructions.
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User’s
Guide.
1Unpack
Note: Do not open the ink bottles until you are ready to ll the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1 Remove all protective materials from the product.
2 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2Choose a setup method
The Epson Smart Panel®app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to
use a mobile device for
setup, skip to the “Fill ink
tanks” section.
To use your mobile device
for setup, continue to
step 1.
OR
1 Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2 Press the power button to turn on the product.
Note: Do not connect your product to your computer yet.
3 Launch the app and follow its instructions to set up your
product. If necessary, tap the +icon on the top right
corner of the app’s home screen, tap Start setting up,
and follow the instructions to set up your product.
For information on connecting your product to a computer,
using voice-activated printing, solving problems, or for details
on reaching Epson support, see the sections on the back of
this sheet.
3Fill ink tanks
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution: This product requires careful handling of ink. If ink spills,
wipe it o immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come o.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
will print fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1 Open the ink tank cover, then open the cap for the black
(BK) ink tank.
Note: Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2 Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution: Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3 Insert the ink bottle into the lling port.
Note: Do not force the bottle into position; each bottle is keyed
for each color.
4 Wait for the ink to ll the tank.
Do not squeeze the bottle or
allow it to contact any other
surface.
Note: Ink ows into the tank and
stops automatically when the ink
tank is lled to the upper line. If ink
does not ow from the bottle, lift and
reinsert the bottle.
5 When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap. If any ink remains in
the bottle, close the bottle and store it for later use.
Note: Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak.
6 Securely close the black ink tank cap.
7 Repeat the previous steps for the other colors.
8 Close the ink tank cover.
Start Here
L3560

5Install software
Note:
• An Internet connection is required to obtain the product software.
• To print from a Chromebook™, go to
http://latin.epson.com/support/chromebookprint for instructions.
1 Make sure the product is NOT CONNECTED to your
computer.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
2 Download and run your product’s software package. For
the latest software, visit:
http://latin.epson.com/support/L3560.
3 Follow the instructions on the computer screen to run the
setup program.
4 When you see the Select Your Connection screen, select
one of the following and follow the on-screen instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have the USB cable ready.
Mobile and voice-activated
printing
• Print directly from your Android™ (v4.4 or later) device*.
Simply connect your printer and device to the same network
and tap the menu icon to select the print option.
• Turn your mobile device into an intuitive, easy-to-use
printing and scanning control center with Epson Smart
Panel. Download the app from your mobile device’s app
store.
• Print remotely with Epson Connect™. See your online User’s
Guide for instructions or learn more at
http://latin.epson.com/connect.
• Use voice-activated assistants to print a variety of creative
and everyday items from your Epson®product. Simply add
your product to an Epson Connect account, then link the
account to a voice-activated assistant. See
http://latin.epson.com/support/voice for more
information.
* May require the Epson Print Enabler or Mopria Print Service app from
Google Play™.
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• Restart your router (turn it o and then on), then try to
connect to it again.
EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a
registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Chromebook, and Google Play are trademarks of Google LLC.
General Notice: Other product names used herein are for identication purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 6/22
Printed in XXXXXX CPD-62655
4Load paper
See the online User’s Guide for information about loading
capacity, available paper types and sizes, and loading
envelopes.
1 Make sure the product is done charging the ink. Then ip
the feeder guard forward, raise the paper support, and tilt
it backwards slightly.
2 Slide the edge guides all the
way out.
3 Load paper, glossy or
printable side up and short
edge rst, in the middle of
the rear paper feeder.
Note: Make sure the paper is under the mark inside the edge
guides.
4 Slide the edge guides against
the paper, but not too tightly.
5 Close the feeder guard.
6 Open the front cover.
7 Pull out the output tray and raise
the paper stopper.
8 Select the paper settings on the product’s control panel.
• The printer can only connect to a network that supports
2.4 GHz connections. If your router oers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.
• If you see a rewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
• Print a network connection report to identify network
problems and solutions. See your online User’s Guide for
instructions.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any gaps in the printout.
Then clean the printhead, if necessary. See the online User’s
Guide for more information.
The product’s screen is dark.
Make sure your product is turned on and press any button to
wake it from sleep mode.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and the USB cable is securely
connected.
Any questions?
User’s Guide
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described in “Technical support.”
Technical support
Visit http://latin.epson.com/support/L3560 to download
drivers, view manuals, get FAQs, or contact Epson.
You can also speak to a service technician by calling one of
these numbers:
Argentina (54 11) 5167-0300 Guatemala* 1-800-835-0358
0800-288-37766 Mexico 01-800-087-1080
Bolivia* 800-100-116 Mexico City (52 55) 1323-2052
Chile (56 2) 2484-3400 Nicaragua* 00-1-800-226-0368
Colombia 01-8000-915235 Panama* 00-800-052-1376
Bogota (57 1) 602-4751 Paraguay 009-800-521-0019
Costa Rica 800-377-6627 Peru 0800-10126
Dominican Lima (51 1) 418-0210
Republic* 1-888-760-0068 Uruguay 00040-5210067
Ecuador* 1-800-000-044 Venezuela (58 212) 240-1111
El Salvador* 800-6570
* Contact your local phone company to call this toll-free number from a mobile
phone.
If your country does not appear on the list, contact your
nearest Epson sales oce. Toll or long distance charges
may apply.
Need paper and ink?
Ensure brilliant results with Epson specialty
and plain papers, engineered specically for
Epson printers. You can purchase them from
an Epson authorized reseller. To nd the
nearest one, visit http://latin.epson.com
or contact Epson as described in “Any
questions?” on this sheet.
L3560 replacement inks
Color Part number
Single pack
Black T544120-AL
Cyan T544220-AL
Magenta T544320-AL
Yellow T544420-AL
Multipack
Black (×2)* T544120-2P
Cyan, magenta, and
yellow (×1 each)* T544520-3P
Black, cyan, magenta,
and yellow (×1 each)* T544520-4P
* Availability of ink bottle multipacks varies by region.

5Install software
Note:
• An Internet connection is required to obtain the product software.
• To print from a Chromebook™, go to
http://latin.epson.com/support/chromebookprint for instructions.
1 Make sure the product is NOT CONNECTED to your
computer.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
2 Download and run your product’s software package. For
the latest software, visit:
http://latin.epson.com/support/L3560.
3 Follow the instructions on the computer screen to run the
setup program.
4 When you see the Select Your Connection screen, select
one of the following and follow the on-screen instructions:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have the USB cable ready.
Mobile and voice-activated
printing
• Print directly from your Android™ (v4.4 or later) device*.
Simply connect your printer and device to the same network
and tap the menu icon to select the print option.
• Turn your mobile device into an intuitive, easy-to-use
printing and scanning control center with Epson Smart
Panel. Download the app from your mobile device’s app
store.
• Print remotely with Epson Connect™. See your online User’s
Guide for instructions or learn more at
http://latin.epson.com/connect.
• Use voice-activated assistants to print a variety of creative
and everyday items from your Epson®product. Simply add
your product to an Epson Connect account, then link the
account to a voice-activated assistant. See
http://latin.epson.com/support/voice for more
information.
* May require the Epson Print Enabler or Mopria Print Service app from
Google Play™.
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• Restart your router (turn it o and then on), then try to
connect to it again.
EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a
registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Chromebook, and Google Play are trademarks of Google LLC.
General Notice: Other product names used herein are for identication purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2022 Epson America, Inc., 6/22
Printed in XXXXXX CPD-62655
4Load paper
See the online User’s Guide for information about loading
capacity, available paper types and sizes, and loading
envelopes.
1 Make sure the product is done charging the ink. Then ip
the feeder guard forward, raise the paper support, and tilt
it backwards slightly.
2 Slide the edge guides all the
way out.
3 Load paper, glossy or
printable side up and short
edge rst, in the middle of
the rear paper feeder.
Note: Make sure the paper is under the mark inside the edge
guides.
4 Slide the edge guides against
the paper, but not too tightly.
5 Close the feeder guard.
6 Open the front cover.
7 Pull out the output tray and raise
the paper stopper.
8 Select the paper settings on the product’s control panel.
•The printer can only connect to a network that supports
2.4 GHz connections. If your router oers both 2.4 GHz and
5 GHz connections, make sure 2.4 GHz is enabled.
•If you see a rewall alert message, click Unblock or Allow
to let setup continue.
•If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Be sure to enter your password in the correct
case.
•Print a network connection report to identify network
problems and solutions. See your online User’s Guide for
instructions.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any gaps in the printout.
Then clean the printhead, if necessary. See the online User’s
Guide for more information.
The product’s screen is dark.
Make sure your product is turned on and press any button to
wake it from sleep mode.
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and the USB cable is securely
connected.
Any questions?
User’s Guide
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide to
access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described in “Technical support.”
Technical support
Visit http://latin.epson.com/support/L3560 to download
drivers, view manuals, get FAQs, or contact Epson.
You can also speak to a service technician by calling one of
these numbers:
Argentina (54 11) 5167-0300 Guatemala* 1-800-835-0358
0800-288-37766 Mexico 01-800-087-1080
Bolivia* 800-100-116 Mexico City (52 55) 1323-2052
Chile (56 2) 2484-3400 Nicaragua* 00-1-800-226-0368
Colombia 01-8000-915235 Panama* 00-800-052-1376
Bogota (57 1) 602-4751 Paraguay 009-800-521-0019
Costa Rica 800-377-6627 Peru 0800-10126
Dominican Lima (51 1) 418-0210
Republic* 1-888-760-0068 Uruguay 00040-5210067
Ecuador* 1-800-000-044 Venezuela (58 212) 240-1111
El Salvador* 800-6570
* Contact your local phone company to call this toll-free number from a mobile
phone.
If your country does not appear on the list, contact your
nearest Epson sales oce. Toll or long distance charges
may apply.
Need paper and ink?
Ensure brilliant results with Epson specialty
and plain papers, engineered specically for
Epson printers. You can purchase them from
an Epson authorized reseller. To nd the
nearest one, visit http://latin.epson.com
or contact Epson as described in “Any
questions?” on this sheet.
L3560 replacement inks
Color Part number
Single pack
Black T544120-AL
Cyan T544220-AL
Magenta T544320-AL
Yellow T544420-AL
Multipack
Black (×2)* T544120-2P
Cyan, magenta, and
yellow (×1 each)* T544520-3P
Black, cyan, magenta,
and yellow (×1 each)* T544520-4P
* Availability of ink bottle multipacks varies by region.