
1
EN Start Here
TC
TH
Important; must be observed to avoid damage to your equipment.
c
Filling Ink and Turning
On
A�
© 2012 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX
Read This First/ /
This product requires careful handling of ink. Ink may splatter when the ink tanks are lled or relled with ink. If ink gets on your clothes or belongings, it may not
come o. Do not open the initial setup ink bottle package or the rell ink bottle package until you are ready to ll the ink tank. The ink bottle is vacuum packed to
maintain its reliability.
For relling
For initial setup
Remove all protective materials.
Open and remove.
Do not pull the tubes.
Q
Epson cannot guarantee the quality or reliability of non-genuine ink. The
use of non-genuine ink may cause damage that is not covered by Epson’s
warranties.
c
Install the ink bottle cap tightly;
otherwise ink may leak.
c
Snap o, remove, and then install.
Match the ink color with the tank, and then ll with all of the ink.
Install.
Q
B�
Check position.
Unhook.
C�
D�
Use the ink bottles that came with your product.
Even if some ink bottles are dented, the quality and quantity of ink are
guaranteed, and they can be used safely.
c
O
O
O
O
O
O
E�
F�
Install securely.
Close.
Repeat steps Dto Gfor each ink
bottle.
D G
Hook onto.
G� H�
I� J�
Before printing, be sure to hook the ink tank unit onto the product. Do not lay
the ink tank unit down, or position the unit higher or lower than the product.
c