Epson Stylus Photo 1500W User manual

CAUTION
Epson Stylus Photo 1500W
INSTALLATION GUIDE
MacProle
MAC OS X
v20121015
DO NOT INSTALL THE EPSON (OEM) INKS THAT WERE PROVIDED WITH THE PRINTER STORE THESE CAR-
TRIDGES IN A SAFE PLACE AS THEY MAY BE REQUIRED IN THE FUTURE
POWER LOSS MAY CAUSE CARTRIDGE CHIP FAILURE. USE AN UNINTERRUPTIBLE POWER SUPPLY (UPS)
TO AVOID ACCIDENTAL POWER LOSS.

SECTIONS:
Epson (OEM) Driver Download & Installation - Page 2
MacProle Installation & Registration - Page 8

Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
PAGE 1 of 6 >>
1.) Access the Epson website by entering http://www.epson.co.uk in the address eld of your web browser then
select the support section.
FIGURE 1
1
2
2.) Type 1500 into the search eld then select your printer model from the list (see FIGURE 2).
FIGURE 2
1
2
The following instructions will demonstrate how to install the Epson printer driver on computers running Mac oper-
ating systems.
Note: Before installing the Rotech 1500W MacProle, you will need to install the Epson printer driver.

Rotech: Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
PAGE 2 of 6>>
3.) Ensure that the correct operating system is selected, click the Drivers & Software link to expand the
section. Click the Download to initiate the download (see FIGURE 3).
FIGURE 3
4.) Click the Download button to proceed (see FIGURE 4). The email address eld only needs to be
completed if you wish to receive marketing emails from Epson.
FIGURE 4
1
2
3
1

Rotech: Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
PAGE 3 of 6>>
5.) Select Downloads folder as your download destination.
Once the download has completed, open the Downloads folder and mount the .dmg le by double
clicking on the icon.
FIGURE 5
FIGURE 6
6.) Double click on the EPSON Printer icon to begin the installation (see FIGURE 6).

Rotech: Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
PAGE 4 of 6>>
FIGURE 7
FIGURE 8
8.) Click Continue and click Agree to accept the license agreement (see FIGURE 8).
1
7.) In the Introduction window, click Continue (see FIGURE 7).
2

Rotech: Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
PAGE 5 of 6>>
FIGURE 9
9.) Ensure you have a sufficient amount of disk space free to install the printer driver and click Install
(see FIGURE 9).
10.) If you have a password on your account enter it in the password eld and click Install Software
(see FIGURE 10).
FIGURE 10

PAGE 6 of 6 >>
Rotech: Epson Stylus Photo 1500W – Installation Guide
Epson (OEM) Driver Download & Installation
Congratulations! The Epson (OEM) printer driver has successfully been installed. Please proceed to the
Rotech Epson 1500W MacProle Installation section.
FIGURE 11
11.) The following window will appear signifying that installation was successful. Click Close to conclude
the installation (see FIGURE 11).

Epson Stylus Photo 1500W – Installation Guide
MacProle Installation & Registration
PAGE 1 of 8 >>
The following instructions will demonstrate how to download, install, and register the Rotech Epson
1500W MacProle on computers running Macintosh OS.
1.) Download the MacProle by accessing the Sawgrass Europe website by entering
www.sawgrasseurope.com in the address eld of your web browser.
2
3
1
4
2.) Navigate to: Technical Support > Rotech Technical Support > ICC Proles and click on the Epson
Stylus Photo 1500W ICC Prole download link and save the le to your desktop: (see FIGURE 2).
FIGURE 1
FIGURE 2

PAGE 2 of 8 >>
Rotech: Epson Stylus Photo 1500W – Installation Guide
MacProle Installation & Registration
3
FIGURE 4FIGURE 3
1
3.) Once the download has completed, click the download icon in the bottom right corner of your
desktop (see FIGURE 3 > 1). Next, double-click the Rotech_1500W_v1.0.dmg le (see FIGURE 3
> 2). The Sawgrass Installer window should now appear (see FIGURE 4). Finally, double-click the
Rotech_1500W_v1.0.pkg le to begin the installation process (see FIGURE 4 > 3).
2
FIGURE 5
4.) Click Continue to allow the program to determine if the software can be installed and to begin the
installation process (see FIGURE 5).